Come along as I swap my stock ruckus to a gy6 150cc with a rear fatty and front disc conversion
Пікірлер: 138
@orustusamunade8936 Жыл бұрын
One of the best No Nonsense step by step builds i've seen in a long time thank you sir GREAT JOB!!!
@zsproshop Жыл бұрын
Thanks for the suport
@pedronavarro13863 жыл бұрын
Love the content! I like how you just do it the way you want to and everything always ends up working out
@zsproshop3 жыл бұрын
Thank you luckily everything always works out been riding it for the last week or so runs amazing
@WhipzByBlue3 жыл бұрын
Always a pleasure to see your work. Thanks for the upload! 🙏🏾💯
@zsproshop3 жыл бұрын
Thank you for your support
@McRicerton3 жыл бұрын
Bought the rolling wrench harness and it’s worth every penny. 20min plug and play!!!
@JJ-iz5ql3 жыл бұрын
Congrats on hitting 1,000!
@zsproshop3 жыл бұрын
Thanks for the support will try to post more often
@andrewrpena1 Жыл бұрын
Awesome vid. Clean and straight to the point... 👍🏽
@RaulSachsCarrillo3 жыл бұрын
There you go thats awesome!!! Perfect daily and looks good 👍
@zsproshop3 жыл бұрын
Thank you glad to see people are liking it
@sammcevilly109411 ай бұрын
Brilliant video, totally agree with the positive comments, we’ll laid out and presented, avoids the BS rabbit holes you can sink into screaming straight into a show bike build But also love how you start saying this is gonna be simple and by the end you’ve fallen in love with it and say it’s not a show bike ‘yet’. Hope you have more ruck content gonna jump on your page in a second just wanted to say thanks for this video before. Great Job Dude
@zsproshop11 ай бұрын
Thank you so much for the support been close to a year since I have made a video just decided to jump on today and this was my first comment hopefully I can get back into the groove of making them again
@Ooooozer3214 ай бұрын
Straight build, no bs…. Good video!!
@zsproshop4 ай бұрын
Thanks
@faust5417 ай бұрын
Great video. One thing I’d add with the front wheel alignment is that those notches in the front hub are for the Speedo cable, the alignment could be slightly off because you’re running spacers as opposed to the speed sensor.
@luceromontoya92123 жыл бұрын
Wondering when you were going to upload!! Awesome Ruck.
@zsproshop3 жыл бұрын
Thank you for the support I will try to post videos more often
@ezzedoesitaragon804127 күн бұрын
@@zsproshop where did you get the wheels and tires for it
@Valentine987667 күн бұрын
Damn I feel for you out there in the sum with all the project to do a tent and a fan shade treeeeeee breezeyyyyy
@iliveinthe80s38 Жыл бұрын
I can tell you have a little bit of impatience understandable you’ve been waiting a while to get to the fun stuff right now.
@christianobrien4465 Жыл бұрын
Loved this build
@zsproshop Жыл бұрын
Thanks she has a 171 bbk now my daily driver runs and drives great still
@kennethmaynard8692 жыл бұрын
i see u got nissan maxia my bumper lights not work i replaced the whole light assimbly and still not coming on still can use help me figure it out oh and i replaced the rely switch too
@JQUICK214 ай бұрын
I look forward to the day when somebody or some shop puts an aftermarket swing arm, wheel and fat/wide tire on a Honda Monkey! Somebody here on youtube has already turned one into a cafe racer and all it needs is the wide tire and chrome rim on the back!
@zsproshop4 ай бұрын
Love the look of custom monkeys as well maybe sometime in the future
@quinton78543 жыл бұрын
this is a great vid, basically swapping a gy6 from a crappy scooter over to a ruckus even with how to aftermarket parts, will most definitely use this for my ruck..... Also if you didnt notice but your front tire is on the wrong way, directional tire
@zsproshop3 жыл бұрын
I did notice that thought the rotation was wrong but will flip it as soon as possible still riding it like that lol
@quinton78543 жыл бұрын
@@zsproshop im sure probably doesnt mean shit but just thought i would tell you
@teenice8942 жыл бұрын
This dude is a str8 gear head. I like him👍🏼😎
@zsproshop Жыл бұрын
I try lol thanks again
@ItachiUchiha-jv3rf Жыл бұрын
Was your engine a 150cc or a 50cc? If it was a 50 then could you list what Big Bore kit did you use. Found a great deal on a 50cc and wondered if the work would be worth it.
@dinospumoni88602 жыл бұрын
I got a 2015 pcx. Been debating on buying a ruckus so I can do an engine swap.
@carlitosrealg6373 ай бұрын
Got questions can do that on zuma yamaha 2023 my rear look bore
@juliocesarcortez16604 ай бұрын
Can you put the link where you got the exhaust and also tires dimensions Thanks
@wahkitng45059 ай бұрын
i have 2008 zuma my electrical push start button dont work what could it be
@ThePlanet_L.I. Жыл бұрын
What's the name of the donor bike u use for the gy6 engine
@TheNEXXFAZE2 жыл бұрын
Looks great
@fusemalaysia8402 жыл бұрын
what fat wheel that they used...cause I have one waiting for build
@lynnmason60202 жыл бұрын
Dude I’ll buy your OG GET engine assembly off you, I’ve got a 50cc that’s seized. I mostly use mine as a trail bike anyway. Cool video, you planned the parts well.
@zsproshop2 жыл бұрын
If you are local to the Yakima Seattle area look me up really don't want to ship it out
@lynnmason60202 жыл бұрын
Sorry, Wisconsin. Dang.
@OpAfAnx7 ай бұрын
How much did this swap cost you?
@rolynruano893510 ай бұрын
Hello friend, where did you buy the spare parts. greetings
@ericdoran43133 жыл бұрын
I'm swapping mine right now just waiting on a shorty shift and I can start assembly. I ordered the wiring harness since I'm not great at wiring . The ruck shop has it for 162$
@zsproshop3 жыл бұрын
Thanks for letting me know it did not know for some reason when I looked they were all $300 and above
@lynnmason60202 жыл бұрын
What’s wrong with your GET OEM motor. Want to sell it? I’ve got a 50cc seized.
@TophatTapdancin Жыл бұрын
All of that for a bigger tire?
@stuartheafey94 Жыл бұрын
Great video very keen to get 1 Ruckas or Zoomer in UK in🏴 And I love the kit you used to stretch and lower it Those fat whitewalls and wheels wow Wonder how much to get those part imported to UK 🇬🇧 New following great breakdown Can't wait to see the finished bike btw loved the background music?
@zsproshop Жыл бұрын
Thanks for the response everybody loves free music from iMovie LOL bike is still not done but has a 171 Big Bore kit now still my daily driver
@sammcevilly109411 ай бұрын
11 months on your probably done with your UK build by now but if not, Lee Baker at RuckStyle UK is a great point of call, he distributed for the ruck shop but also has a good relationship with a lot of the other American companies you might want to order from, Plus years of experience.
@congerscott60643 жыл бұрын
Great video and great bike, it looks awesome, does any one make a complete conversion kit to do this, i have been wanting to do the swap for a long time but i don't like ordering a lot of parts from different manufactures, things always go wrong for me for some reason,( late shipping, back ordered, out of stock etc. ) 👍🏆.
@zsproshop3 жыл бұрын
Thanks for the comment there is a couple companies that sell complete kits try The ruck shop or rolling wrench Denver
@congerscott60643 жыл бұрын
@@zsproshop i will, thank you ! Your ruckus looks awesome, can't wait to see it completely finished 👍🏆.
@omarrivera353510 ай бұрын
What size are your wheels?
@pasttimes3068 Жыл бұрын
What was your tire set up???
@jagthind49133 жыл бұрын
Can you email the schematics for the wiring? Please
@chrisworld554 Жыл бұрын
Where did you buy your wheels?
@teenice8942 жыл бұрын
Subbed!!
@zsproshop Жыл бұрын
thanks
@C.P.C.RACING2 жыл бұрын
Great how to.
@zsproshop2 жыл бұрын
Thanks 👍
@bigfoot12612 жыл бұрын
That's awesome!
@zsproshop2 жыл бұрын
Thanks 👍
@kyrinmcclintock67532 ай бұрын
I noticed you’re from my hometown! Anyway you can help me with my gy6 swap??
@forsale3133 жыл бұрын
Good job
@zsproshop3 жыл бұрын
Thanks
@Ramenrubber2 жыл бұрын
So what was your total parts cost? Maybe I missed it. Nice work on a more DIY job
@zsproshop2 жыл бұрын
Don't think I ever added up I want to say that I'm somewhere around 1500$ it is a lot of money to put into a scooter but I love riding this thing
@originalgreek3 жыл бұрын
Awesome work! I want to do this to my Ruckus. How fast does it go?
@zsproshop3 жыл бұрын
not too sure yet as I do not have a speedometer we'll get one soon or may just do a top speed run with the GPS on my phone
@originalgreek3 жыл бұрын
@@zsproshop Can you tell a big difference off the start?
@steveblottenberger1097 Жыл бұрын
Been working on it for a couple years now stick a new carburetor on there and run perfect orange might need a valve adjustment that's it otherwise you're good
@chayo9548 Жыл бұрын
the GY6 is an ok engine. If you get one get the Taiwanese version. Most of my friends have the stock engine 50cc but pimp the hell out of their ruckus. It's still looks nice for rides.
@kennethhermosilla33382 жыл бұрын
for the CVT set up you might wanna invest a little bit on fly balls maybe get lighter balls there for much better acceleration especially if you are a heavy rider
@zsproshop2 жыл бұрын
Thanks for the info rode it all summer hit a bump last week and broke the exhaust and head think it's time for a big bore kit
@kennethhermosilla33382 жыл бұрын
@@zsproshop hmm maybe you could tune that thing up to 180cc??
@shanepalmer93452 жыл бұрын
Man I wish you lived by me ide hire you to help me do mine lol
@zsproshop2 жыл бұрын
Thanks for the support man sorry do not do customer work anyways but good luck on your build
@user.NoName Жыл бұрын
Mantap man
@steveblottenberger1097 Жыл бұрын
Oh yeah he's learning
@GrowYourOwnFun3 жыл бұрын
What was top speed after the swap? Have a ruckus and thinking about going to the 150
@zsproshop3 жыл бұрын
Still have not done a top speed run as I do not have a speedometer LOL but definitely feels a lot faster I'm guessing somewhere around mid-50s
@lynnmason60202 жыл бұрын
Let me know if you want to sell your GET OEM engine assembly, I have a 50cc seized
@GrowYourOwnFun2 жыл бұрын
@@lynnmason6020 where are you located. I might would sell it.
@a.k.akingloose4 ай бұрын
🤣🤣🤣I want to say “I’d never, ever!” But…🙃😛!
@nordland2235 Жыл бұрын
Sharp👍
@tommcl85483 жыл бұрын
👍
@rockypergin2216 Жыл бұрын
Had no idea that you could customize the ruckuses
@angelbonano524911 ай бұрын
Where you get the motor mount?
@zsproshop11 ай бұрын
Mojo customs gy6 fatty mount
@ericdoran43133 жыл бұрын
I've never used that mount but you might need to use spacers to line it up it's not safe having the center line off .
@zsproshop3 жыл бұрын
Yes I contacted Drow sports and they assured me this was the way it was supposed to be got a little closer once everything was tight but still about 1/8 of an inch off doesn't bother me too much
@brandojon2 жыл бұрын
@@zsproshop it is the way its supposed to be, from my understanding, when you sit on it and the shock gives a bit, it should be in line
@terrellsmith7932 жыл бұрын
Where did You get the rims and tires
@zsproshop2 жыл бұрын
Monstergy6.com talk to Steven wheels are priced fairly and ships within reason highly recommended
@terrellsmith7932 жыл бұрын
@@zsproshop do you know the bolt pattern. I just purchased one. But it was the jasscol trike I believe the same bike but different name
@wahkitng45059 ай бұрын
look like the rotation of front tire is backwards
@willyjimmy88812 жыл бұрын
What was your donor scooter?
@zsproshop2 жыл бұрын
The donor scooter was an adventure 150cc Chinese scooter that's about all I can tell you on it just use it for parts just make sure it has a long case 150cc and you should be fine
@jagthind49133 жыл бұрын
What make and model was the donor scooter?
@zsproshop3 жыл бұрын
Not too sure did say adventure on the side of it 150cc
@jagthind49133 жыл бұрын
@@zsproshop nice, I'm planning on doing the same. I'm going to be using the donor harness and splice everything up with ruckus connectors. Any problems you encountered while doing this?
@zsproshop3 жыл бұрын
No I'm pretty straightforward just label everything and make sure they go to the same spot
@jagthind49133 жыл бұрын
@@zsproshop Awesome! Did you just cut the GY6 connectors from the harness and spliced the original ruckus connectors? And did you have to use original ruckus ECU?
@truebluecrew222 жыл бұрын
I think the rotation of that front tire is backwards
@ChrisParayno3 жыл бұрын
Do they make an e-version?!
@zsproshop3 жыл бұрын
Not from factory but did see someone swapped an electric motor into one
@zsproshop3 жыл бұрын
Not from factory but did see someone swapped an electric motor into one
@ChrisParayno3 жыл бұрын
@@zsproshop sweet!
@andrewvoigt11332 жыл бұрын
I don't have any problems with the fat wheel, it's cool looks awesome. However I can't escape the annoyance of the fact that a slightly worn fatty has exactly the same ride instability as a darkside tire and becomes more exaggerated in that direction as is reaches the end of it's service life. Even a normal width motor bike tire has more squarness at end of service than a new darkside. Yet none of Jedi bike masters have any problems with a fat tire. Buy the way darkside tires actually become slightly more rounded with use so the handling actually improves with use.
@zsproshop2 жыл бұрын
Yes not to worried about it as cannot corner at all with the bike being so low anyways have to slow down almost everywhere stretch slammed Ruckus is not good for handling LOL
@mattjohn27822 жыл бұрын
Music for eating tacos !
@zsproshop2 жыл бұрын
Yes I love 🌮 tacos if you can't tell lol
@mattjohn27822 жыл бұрын
@@zsproshop Lol, I was referring to the latin song at 4:35. Z, Your project is exactly what i've been thinking about. Some might say is a "budget" build but actually is a really smart build. Using a full 150cc scooter as donor is way more cost effective and reliable than upgrading ALL the components of a ruckus. I've seen guys throwing lots of money in upgrading 50cc ruckuses just to end with a scooter that cannot even match a 125cc. Congrats on your build, really nice. Just one question, what kind of fuel pump are you using with the GY6 engine? Thanks a lot
@zsproshop2 жыл бұрын
I used a Mikuni mecanical snowmobile fuel pump runs off vacuum from the engine cheap and reliable thank you for the support
@mattjohn27822 жыл бұрын
@@zsproshop Thank you God bless you
@scooterboy3043 жыл бұрын
Bro....you can use the chinese replica "chuckus" harness.they are exactly the same size and work perfectly.brand new 120 bucks
@zsproshop3 жыл бұрын
Thanks for the info I thought the chuckus harness was the same as any other scooter with the GY6 would still need to be adapted for turn signals and hand controls correct?
@scooterboy3043 жыл бұрын
@@zsproshop the chuckus harness is just a plug and play thing.its almost identical in location as the factory GET harness.i bought the trike version because it's about 10 inches longer.i get all my harnesses from Cajunmaddog.com .he's always in stock and shipped to your around 120 or less.
@nordland2235 Жыл бұрын
I wish they made em with 2 shocks....1 shock does not do it for us big guys.
@jjmarz10013 жыл бұрын
It's been four months. I'm suffering from CRV withdrawal...
@zsproshop3 жыл бұрын
LOL Yes sorry should have made videos on the last two I bought was just simple stuff though not enough for a video but still buying them maybe soon
@zsproshop3 жыл бұрын
LOL Yes sorry should have made videos on the last two I bought was just simple stuff though not enough for a video but still buying them maybe soon
@scooterboy3043 жыл бұрын
What part of this was a budget build.you got like 3000 dollars worth of parts there buddy
@zsproshop3 жыл бұрын
I know LOL I think I am somewhere around $2,000 don't think that is too bad for a GY6 build semi budget build LOL some guys get up there and spend 4 to 5,000 on the swap
@scooterboy3043 жыл бұрын
@@zsproshop I've got roughly 2500 in mine and it's nowhere near finished lol.
@mikepool2153 жыл бұрын
Do you have an Instagram?
@zsproshop3 жыл бұрын
Sorry I don't have one for the channel maybe if people keep asking I will start one thanks for the interest
@nordland2235 Жыл бұрын
I am 6ft 239...my ruckus will do 40 mph with me on it.....its bone stock.
@speedyzoom8689Ай бұрын
Bro ruined the test ride with the music rip.
@scootersonlyrepair67732 жыл бұрын
I love gy6 engines but it's retarded that anyone would replace a great quality water cooled Japanese honda engine with a Chinese copy.yes its faster but do a real swap and keep it water cooled with an elite 150 or 250 engine
@zsproshop2 жыл бұрын
This was just the most cost-effective and easy swap for me at the time Road the thing all summer reason for swap was the hard start in the mornings like I mentioned at the beginning of the video probably just needed a valve adjustment