How to 3D Model Threads in OnShape

No video

How to 3D Model Threads in OnShape

Рет қаралды 12,815

Ryan Tuscher

Күн бұрын

Пікірлер: 29

@RyanTuscher Жыл бұрын

What kind of 3D printer objects will you make with threads now? I’ve got some projects in the works using my Snapmaker 2.0!!

@RexHanson 11 ай бұрын

This is a good description, but I found that it works better for 3D printing to make the angle of the threads to be 45 degrees so you don't need any support material supporting the threads. It's no longer a standard thread, but you are probably printing the mating parts so it's easy to make them the same.

@RyanTuscher 11 ай бұрын

You mean a triangle but with 45 degree corners? I'll have to try this out when I make threaded parts for my desk accessories! I appreciate your feedback!

@RexHanson 11 ай бұрын

Yes! The 45 degree overhang doesn't need any support material where a shallower angle needs supports.@@RyanTuscher

@CameronPenner 5 ай бұрын

Thank you! This is exactly what I needed.

@Irek_Poland 26 күн бұрын

Thread creator plugin- easy, fast.

@johnnygunz2300 8 ай бұрын

yo... awesome... this is so straight forward. Just got my P1S and like a kid in a candy store making stuff!

@RyanTuscher 8 ай бұрын

That is amazing! 3D printing really opens up the world for what is possible for people to create at home! I’m glad I was able to help you on your journey!

@ben1canobe150 5 ай бұрын

Great --- Thanks

@srboromir452 Ай бұрын

so then what's the point of the "external thread" tool in onshape? I haven't gotten it to work

@kelvin1316 3 ай бұрын

How do you get the thread to merge nicely at the start? There is like a bit jutting out of the end and not a smooth start to it?

@joshuaerman9822 Жыл бұрын

Could you show how to make threads on an offset plane. Also hod do you know the minor diameter

@SirPiggels Жыл бұрын

Are there any feature scripts you would recommend for adding threads?

@shawnwise2458 7 ай бұрын

Quick tip: change video speed in youtube settings to .75 (3/4 speed) so you can follow along.

@kelvin1316 3 ай бұрын

Ironically I went to 1.5 speed because I find these sorts of videos have a lot of "waffle" (i.e. explaining things I already know not that the presenter is actually waffling on!)

@eGazTheFirstAustralian Жыл бұрын

Hi Ryan. You said in a different clip, you've monetised your channel. I can't see where to contribute. How do we help you?

@RyanTuscher Жыл бұрын

The channel actually is not monetized at the moment but it was 6 years ago when the rules were different. Once the channel hits the 4,000 watch hours again we’ll be able to apply for monetization. Thanks for your support! We’ll get there soon!

@travislarson5192 Жыл бұрын

@@RyanTuscher I'm a little slow and not to bright. Watching this on repeat trying to figure out internal threads should help you get to the 4k hours watched time. I get the sweep, but constraining it properly for the actual threading is causing me grief. Regardless, I hope your channel takes off. I appreciate the content.

@evertkleynhans2617 27 күн бұрын

Thanks for trying to explain. You know exactly what to do, however, you are using keyboard shortcuts and not mentioning it, and going WAY too fast for a training video. I've been replaying parts of this video over and over and still can't get it right. Hope this comes over as constructive criticism. Thanks for the video.

@RyanTuscher 25 күн бұрын

What parts did you miss? I’ll try and add some clarification here for you!

@evertkleynhans2617 25 күн бұрын

@@RyanTuscher It's ok, thank you. Forced me to think a bit (and learned some keyboard shortcuts) . At least you prompted me in the right direction.

@coryseaward975 7 ай бұрын

wow... this program hasnt figure out ho w to make proper threads yet.... Obsolete

@poorboysadventures4636 5 ай бұрын

Onshape made a thread feature last year. You can make ANSI threads with TPI and diameter. Works well.

@Pappagar 5 ай бұрын

its good at a lot but not threads. in the lords years 2024 thats unforgivable

@poorboysadventures4636 5 ай бұрын

@@Pappagar there is a thread feature for ANDI standard. The crappy thing is it only does male threads. You can insert threads in a hole in onshape which is kinda wack.