No video
How to 3D Print Better Text | Markforged Reinforced
Рет қаралды 13,728
Күн бұрынHave you ever designed text into your 3D printed part only to find less than desirable results after it’s finished printing? Maybe you’ve never added text but want to on your next print? Ross has you covered.
In this video, Ross goes step by step in Fusion 360 to give you his design intent, best practices, and tips for getting the best quality text on your 3D printed part.
Please let us know in the comments if there’s something you’d like us to cover or a challenge that you’re working through!
VIDEO CHAPTERS
0:00 - Introduction
0:52 - Orientation & Placement
3:27 - Thickness & Size
4:40 - Fonts
5:24 - Debased vs. Embossed
7:14 - Recap
Want to learn more about 3D Printing? Check out the Markforged learning library for more tips and tricks: bit.ly/3y04flG
@alejandrorodriguez9554 Жыл бұрын
Muy buena instruccion.
@markforged Жыл бұрын
Gracias! Thanks for watching
@gageleighton7878 Жыл бұрын
The conclusion is the same but it all comes down to the nozzle size. Layer height is never that much nigher is even the nozzle diameter. Thus, embossing text using vertical plane should always come out better than the top or bottom surfaces. I.e. for a 0.4 mm nozzle that resolution in X & Y vs 0.3 mm or LESS in Z-axis.
@markforged Жыл бұрын
Great commentary and notes. Thanks for watching!
@azisandwich Жыл бұрын
Nice
@markforged Жыл бұрын
Thanks Azi!
@hulk239239 Жыл бұрын
rather then using extrude, Fusion360 has a dedicated emboss feature
@markforged Жыл бұрын
That's great insight, we'll have to include that in future videos. Thanks for the comment!
@lightandcolour 8 ай бұрын
Great content. Please use a Teleprompter for better speech delivery.
@markforged 8 ай бұрын
Thanks!
@satchelsieniewicz5824 Жыл бұрын
ooof tragic fusion model. rip design engineer
@user-fo7mf9nd2h Жыл бұрын
?
SALEM EPISODES
Рет қаралды 773 М.
Markforged
Рет қаралды 45 М.
AuthentiKit
Рет қаралды 150 М.