How to add a tooth to Retainer by Szara Dental lab

Рет қаралды 11,831

Жыл бұрын

#retainer #teeth #orthodontics
I attempted to make this video over 5 different times. Each time I figured out a better way to secure teeth to invisible retainers and had to completely start over. I used to paint the teeth into retainer and it works but has it's own issues. I used to thermoform teeth but they always eventually fall out. Not to mention move ever so slight when pressing.
I've have been using this exact technique for the last 3 years and have had great success. You can find some of the supplies needed in my Amazon shop. Click link below:
www.amazon.com/shop/szaradent...
disclaimer a small portion of your overall Amazon sale will go Szara Dental. Thank you for supporting the channel.
To learn more about the Christian Brenes FREE tooth library click on this link: • Installing Tooth Libra...

Пікірлер: 41

@perry7266 Жыл бұрын

Voted most helpful video of 2023🎉

@SzaraDentalLab Жыл бұрын

Thank you Perry. Best comment all year!

@KesseeIan Жыл бұрын

Right when you started I thought about the 3d manipulation to add a tooth, and you went right to it. But the cutting of a channel in the printed model for Mechanical retention like when setting a tooth for a flex partial was a boss move. Super super clever.

@SzaraDentalLab Жыл бұрын

The groove cutting makes a huge difference. Thank you for watching and commenting

@DianaLopez-fz5el Жыл бұрын

Love it😊

@acnud Жыл бұрын

Great idea, thanks for sharing.

@SzaraDentalLab Жыл бұрын

So welcome Duncan. Thanks for taking the time to actually tell me

@rcdl316 Жыл бұрын

I like it!

@SzaraDentalLab Жыл бұрын

Thanks Austin

@chrismacri1697 Жыл бұрын

I like how you add the tooth using the tooth library. I noticed you didn't address occlusion. I would recommend Highlighting the opposing arch and turning on the magnet tool in the image viewer. Select your newly placed tooth and using the magnet tool, you can get it to perfectly adapt to the opposing dentition.Turn off the magnet tool and use The robust smooth tool to give yourself a bit of space between the new tooth and the opposer.You'll find that no adjustment is needed when the retainer is delivered.

@SzaraDentalLab Жыл бұрын

Thank you Chris for sharing. This makes a lot of sense. Will try on next one

@RetainerDesigner Жыл бұрын

Genius!!!!

@SzaraDentalLab Жыл бұрын

well i wouldn't go that far. lol

@aileenherrador3711 Жыл бұрын

are we able to use mesh mixer to check the bite after we create the tooth? or how can we do that? Great tutorial, love it.

@SzaraDentalLab Жыл бұрын

I'm not sure about using meshmixer for checking articulation. 🤔 I know there are other programs that you can do this. Typically if possible (have a lower model) I hand adjust any interference etc

@lemarcuswilliams6954 3 күн бұрын

Can you eat with these in?

@torbjornakesson2449 Ай бұрын

Hi! Thank you for the informative video. You mentioned two layers of Celoform as insulation (4:19 minutes in to the video) Looks interesting. What is that and how do you apply it?

@SzaraDentalLab Ай бұрын

It's called siliform seperator. It's a liquid seperator that you apply with a brush. Let dry and then add another coat. Otherwise the acrylic tooth will stick to the model. Thanks for 👀 watching

@jezzum62 Жыл бұрын

Can you use composite or 3d resin? Or does the jet adhere to the Essex material or is the magic the undercut?

@SzaraDentalLab Жыл бұрын

The magic is definitely putting in the undercut and allowing the acrylic to flow around it. I've never tried anything but acrylic. The only other way to that has worked for me in the past is using a light cure seal material like PALA. Not glue, it will always fall out

@SzaraDentalLab Жыл бұрын

3D Resin or a composite would probably work just fine if I had to guess. Again Flowing material around and in a GOOD undercut

@cramirezdds Жыл бұрын

How do you clean off the fogginess in the essix after clearing off the excess? I tried with a blade but it still looks rough/foggy

@SzaraDentalLab Жыл бұрын

Try adding a little mineral oil like seen in some of my other videos. (How to make a nightguard)

@cramirezdds Жыл бұрын

The hard soft video or flat plane one?

@user-jp7qq8dl8f Жыл бұрын

HOW DO YOU CLEAN THE SYRINGE TO USE MORE TIMES ? HOW DO YOU REMOVE THE RESIN THAT IS LEFT

@SzaraDentalLab Жыл бұрын

I just push it out before it completely hardens. I use each syringe multiple times

@StephRenee812 7 ай бұрын

You make these fir people without seeing them in person

@SzaraDentalLab 7 ай бұрын

Yes

@yasminehey3854 5 ай бұрын

but how about the color of their tooth how do you get it as close to their theeth color im asking cuz i'm getting retainers soon and with a tooth in them but i nocticed that my dentist didnt talk about the color of the tooth at all @@SzaraDentalLab

@SandyReid-ADM 3 ай бұрын

I have one and its made terribly 😢😢

@SzaraDentalLab 2 ай бұрын

Sorry to hear that Sandy

@thepatternforms859 Жыл бұрын

Ok great so for all this effort and expense in production, time, and materials what is the patient being charged? Insurance isn’t paying jack for these I’m sure ANd the PT will still need the 3 unit bridge… soooo what are we charging to the patient for this?

@jezzum62 Жыл бұрын

We charge $550

@AhmedWissam Жыл бұрын

we do these for under 50$ here in iraq xddddd

@thepatternforms859 Жыл бұрын

@@jezzum62 I think 550 is fair. A single tooth flipper partial is 600. So makes sense

@thepatternforms859 Жыл бұрын

@@AhmedWissam wow that is insane! How much does a 3 unit bridge cost in Iraq?

@AhmedWissam Жыл бұрын

@@thepatternforms859 from 300$ to 500$ for zirconia depending on the city the doctor lives in And this cost including the lab + clincal work

@user-jp7qq8dl8f Жыл бұрын

HOW DO YOU CLEAN THE SYRINGE TO USE MORE TIMES ? HOW DO YOU REMOVE THE RESIN THAT IS LEFT