How To Add Bezels / Borders - RetroPie Tutorial

No video

How To Add Bezels / Borders - RetroPie Tutorial

Рет қаралды 73,756

Күн бұрын

In this video show, you how to add bezels / Borders to your Retropie Setup on the Raspberry Pi.
▼▬▬▬▬▬▬ Download Links▬▬▬▬▬▬ ▼
MrHArias Border Pack: • Retroarch Bezels Colle...
David Marti's Motion Blue 6: • Video
Winscp:winscp.net/eng...
WinRar: www.rarlab.com...
▼▬▬▬▬▬▬ NEED A RASPBERRY PI? ▬▬▬▬▬▬ ▼
Raspberry Pi 3 B Plus: amzn.to/2DTF0Db
Raspberry Pi 3: amzn.to/2I52vvc
Raspberry Pi Camera - amzn.to/2iTousp
Raspberry Pi 3 Starter Kit - amzn.to/2gYKNQr
My favorite Case - amzn.to/2wVDGjQ
Raspberry Pi 7 inch Touchscreen - amzn.to/2gHoIFf
16gb Sandisk sd card- amzn.to/2iJDdpW
32gb Sandisk sd card - amzn.to/2icMyth
64gb Sandisk sd card - amzn.to/2icBAnx
128gb Sandisk sd card - amzn.to/2hx4GgK
2.5 Amp Power Supply - amzn.to/2wqegrH
💙 Become a Patron: / etaprime
💙 Support The Channel: Paypal - bit.ly/2gy2ffr
💙 Facebook Group: bit.ly/2rkuKPK
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you.Music credits:
Song Name: Home Sweet Megalopolis - Synthwave
Artist: TeknoAXE
www.reverbnatio...
Listen Here: • Home Sweet Megalopolis...
THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY! DISCLAIMER: Under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education, and research. No Games Or Applications Are Included Or Added On Or To Any Device In This Video

Пікірлер: 111

@RyonMugen 6 жыл бұрын

WHY DO YOU ALWAYS MAKE VIDEOS AT THE EXACT POINT IN TIME THAT I NEED THEM!! THANK YOU SO MUCH!! No joke... Every time bro. Your the man!

@sebalberico 5 жыл бұрын

as a noobie (1 week) on retropie, I can say that in your channel i found most of the answers to my questions about settings and extras. Thanks a lot!

@HectorAriasTech 6 жыл бұрын

Thank you for linking my page. I'll try to update the link with more bezels since I collected, made more since then.

@ETAPRIME 6 жыл бұрын

Thank you for taking the time to modify all these! I looked around for a good pack and this is the best I have seen. Thank you.

@maxtang8441 6 жыл бұрын

Thanks for the great work! Can you advise the screen setting in order to fit in those handheld bezels? I got display problem when using GBA bezek.

@alexbecerra3082 5 жыл бұрын

Thanks MrHArias, hey can you do add bezel for Sega dreamcast

@MrStreetboy80 5 жыл бұрын

This looks like a great collection. I’m Gona go and get the downloads now. Il be sure to subscribe on the way!

@davidr5964 3 жыл бұрын

I know it's 2 years old but this was beautifully concise. Kudos!

@huskylfp1505 6 жыл бұрын

You are the only one that I understand everything... Because my English is not so good (I am Colombian) thanks for all your tutorials ETA Prime

@RetroSteveUK 3 жыл бұрын

Helpful, thanks. I couldn't work out how to get overlays loading in each time a game was loading. It was the Game Overrides setting that did it.

@tominator7728 5 жыл бұрын

Your videos are the best! You break it down in a way so easy to understand! Most of my customizations to my RetroPie setup have been based on your videos. Thank you so much!!!

@cargorunner9960 6 жыл бұрын

Another great guide. Overlays are such a great finishing touch to your setup. But when I tried this I had problems on a number of systems. The same core can be used for a number of systems. This means saving a sega master overlay will appear on the sega mega drive and sega SG 1000 games, which you don't want. So you can have just one overlay for all 3 systems unless you create an overide for every single game which is a huge amount of work. I don't think you mentioned this big problem. Doing some research, the PC version has a save "content directory override" so that you can have an overlay per system, which is perfect. I wonder why this option is not available on retropie version 4.4. Hopefully it will appear soon.

@traida111 Жыл бұрын

devs should put this in the optional packages section, or even the core!! it really is fantastic

@MrStreetboy80 5 жыл бұрын

This is just what I’m looking for! Customised all my emulator overlays to make them look the best they can and give the original feel as close as poss, the empty edges just look boring now. Thanks 🙏🏻

@PortersEntertainmentStation 2 жыл бұрын

Just the best

@dlord1953 6 жыл бұрын

Really good video. Detail spot on, clear and concise. Thank you

@0kti 6 жыл бұрын

Great tutorial. Greetings from Poland

@peppolo 6 жыл бұрын

This is the reason because we love ETA PRIME

@boba_rhett 5 жыл бұрын

These look great. I'll have to try it out when I get a moment.

@sonixthatsme 6 жыл бұрын

As always a very clear explanation. Thanks!

@FlintG 6 жыл бұрын

Love these! I have them setup on my pi also with the crt curvature enabled for scanlines.

@murilobonassi2427 6 жыл бұрын

Hey, Eta Prime! Big fan right here, first, I have to thank you because everyday my "GamePi" console only gets better because of your channel. Second, I have a question that I've never found an answer online: Besides getting a "better" performance from N64 games, what can I gain from overclocking my Pi3? I'm kinda scared of doing it, because I have a NesPi Case, and I don't know if overclock is worth of risking, because, I accepted that I can't play N64 properly on Pi (despite being my favorite console), so, is there any another gain from Overclocking? And, is there a risk overclocking with a NesPi PCB connected on it? Because I know the NesPi Case uses more energy Thanks!

@Loundsify 6 жыл бұрын

Dude I overclock my pi to 1.4Ghz and 500Mhz for the GPU and it runs everything really well, noticed a difference from before. Also N64 try the different emulators plugins, I think I use Glez and it runs Ocarina of Time perfectly.

@murilobonassi2427 6 жыл бұрын

Loundsify Thanks for the reply! But, despite getting a better performance from N64, is there another gain from overclocking? Do I need to overclock for another X reason?

@mathieuanglehart2671 6 жыл бұрын

You are truely the best of the best

@sergioamathon6599 6 жыл бұрын

Really Really Cool add to retropie!! Thanks for the video ETA PRIME 👍

@MrRockfish01 6 жыл бұрын

This is exactly what i was looking for, thanks :)

@adamwestwood710 6 жыл бұрын

great tutorial ETA. if you could make tutorial on this for standalone retroarch that be great.

@outherebrothers 3 жыл бұрын

Very helpful video, brilliant :)

@AJ7677 6 жыл бұрын

Great information.

@mamory3791 5 жыл бұрын

Links are down 😢

@amshermansen 6 жыл бұрын

On the topic of borders. How would one get Retropie to use up the entire vertical screen space? I've been unsuccessful in trying to tweak things.

@Loundsify 6 жыл бұрын

Good video, have you ever used an app on Android called RasPi check? It uses SSH to run commands to give you visual stats of your hardware, so CPU usage, ram usage, temps etc and you can create command buttons too, so you can just control certain features from your phone. Try it out! :)

@getridofit666 5 жыл бұрын

Hello and thank you for the vid! Quick question: Does adding bezels and shaders increase input lag on emulators such as snes and neo geo?

@davidlegoliath5040 2 жыл бұрын

You have a reference for the arcade mod ! Very nice video ! I have a Arcade 1up Pac-Man 40th Anniversary and install the Retropie but the menu is not centered (cut on the left side). How do I fix it ?

@mahditalib4485 5 жыл бұрын

Thank you for this tutorial, but I have a problem getting GBA Aspect ratio right with the frame set for my experience.

@garykulovics7705 6 жыл бұрын

Hi ETA Prime Great video as usually Have update my bezels on most of my systems and they look great now. One fast question have RetroPie 4.4 installed on a Ubuntu x64 system but I can't find Daphne anywhere on the system Have looked in experimental packages Optional packages and main packages but have found nothing Have a copy of Dragon's Lair and would love to added it to my Retropie machine Any clues what happened to it? Thanks Gary

@JohnOaks 6 жыл бұрын

Watched this hoping to learn how to add bezels per system when some consoles use the same core. For example if I set a Genesis bezel it will also launch with Sega Master system since it’s using the same core.

@andihoar1608 6 жыл бұрын

John Oaks Add the bezels in the 'config editor' for each system, don't apply it in the retroarch menu in game and save it as core overide otherwise it will be used on all the systems that emulator runs

@billyretrogamer 6 жыл бұрын

Awesome! Question: do you find that the bezel along with the shader affects the gameplay, even with the pi 3b?

@facufeg86 4 жыл бұрын

Awesome vid! Question: Is there some bezel that just only have the "crt tv border"? What i mean is, i only want the crt border without the images that appears on the left and right sides

@TheRaFinch 3 жыл бұрын

Can you do an update on this the links done work and I would love to do this on my pi. Thank your the great vids

@wyliecoyoteuk1 6 жыл бұрын

Thanks ETA, really helpful as always. The monitor in my cabinet is 1280 x 800 and these appear set up for a different ratio. I'm guessing I have to play around with the Retroarch native resolution to get these to fit? Any advice gratefully received because I haven't fiddled around with that aspect thus far.

@mrshoes1002 6 жыл бұрын

Great video and I really wanted to do this so thank you! also, how do you do the hand held bezels. I found some online since MrHArais pack didn't come with them but they are meant for a smaller (Custom) screen. any ideas?

@MikkyTee 6 жыл бұрын

Thanks for this, got the bezels working, but mine seem too big for my screen. I'm using a 20in dell 4:3, and I have to increase the scale up to 1.35 in order to get it clear of my viewing area, this is only with my vertical shooters.. any ideas?

@AloneinFiction 6 жыл бұрын

Can you recommend any gaming kit? I was thinking of getting a pandora box 5 gutting it and installing it into a bartop cabinet I have. Do you have any suggestions?

@lofihub191 6 жыл бұрын

Hey ETA, great tutorial as usual.. My only issue is that my GBA games are not fitting inside of the Bezel and instead laying on top of it. How do I fix this?

@BinhowGyn 6 жыл бұрын

Excelente

@johnedwards1968 4 ай бұрын

Mine goes into retroarch with hotkey + X

@gavincaventer3272 4 жыл бұрын

Hello ETA prime another great tutorial how do I get gameboy to display properly in the bezel window as when the game is playing it is set to one site and to bog for the window of the bezel thanks

@hbtff 5 жыл бұрын

New to the channel Prime. How do you shrink the bezels on the screen. I see how to remove. But is there any way to shrink so you you can see the screen better. Also how do we make the screen look more clearer? Thank you in advance

@divebomb1000 6 жыл бұрын

I am using just standard retro arch on my phone with mame I have these bezels does anyone know how to have specific bezels for certain games say if I play blazing star it has a horizontal bezel and if I play a vertical game it has one for it? I can't seem to figure it out

@Mr.Goodkat 5 жыл бұрын

I can't remove bezels, I go to onscreen overlay, turn display overlay off, configuration override and save core overrides but when I go out and back in the bezels are back, anyone know how to fix this?

@christianserra6167 5 жыл бұрын

you have to activate save configuration on exit

@Mr.Goodkat 5 жыл бұрын

@@christianserra6167 I have tried that multiple times, they still come back.

@darrenhayward1976 5 жыл бұрын

Great video. When I do this the bezel bleeds over the game screen so the bezel is too big?

@GrandMasterLynx 4 жыл бұрын

Did you figure out what was wrong with it?

@ThaXified 5 жыл бұрын

Oke, first of all, this is insane, second is my game running automaticly on 4:3 ? third if i install a new game after scraping all the bezels, do i need to do the process all over again?

@exucalibur8907 6 жыл бұрын

any chance on reviewing with TeknoParrot? maybe benchmark it with 2400g?

@Banjo_Oz 4 жыл бұрын

Is there an alternate source for the bezels (or a different pack)? The link to the creator's site doesn't work. :(

@XxXTMillzXxX 6 жыл бұрын

Is retropie compatible with a android TV box? Is there a good front end for Android?

@macdadaniel 6 жыл бұрын

I'm having problems with getting into the retroarch menu. is there another way to access it and set it up

@fuckgoogle554 2 жыл бұрын

Hotkey plus y isn't doing anything for me

@GERKmiI 4 жыл бұрын

This Borders are not longer available over the links you've in your description.

@THRobinson 5 жыл бұрын

Is there a way to disable all at once? vs doing this for all systems one-by-one? I got an img file with bezels but running a 4:3 screen so overlays are a bit useless.

@chevyxrz 2 жыл бұрын

How do you remove the bezels??

@sixeight6 6 жыл бұрын

I need ur help when I start my fba games on retropie I can hear it but it just has a black screen shows. Any idea how to fix it please help

@fvgoya Жыл бұрын

The link for download is not working anymore 😕

@bassistguy 5 жыл бұрын

For any Linux or Mac folks (and Windows if you choose), you can use Filezilla. It's free and easy to use.

@TheLar1980 3 жыл бұрын

The link to the bezel sets is dead 😐

@slumpcypress1730 6 жыл бұрын

Can you make a portable odroid xu4?

@rloweable 6 жыл бұрын

Does this work with Recalbox?

@OnkelTora 4 жыл бұрын

Not working anymore. Link of MrHArias is down. :(

@robhopper5729 6 жыл бұрын

doesn't changing the names of your roms mess a lot of things up? I installed the SNES bezels and it defaults to the SNES overlay, as it can't find my roms because the filenames don't match..

@BalimoreBlindGaming 4 жыл бұрын

Links do not work for download.

@andreapi4352 6 жыл бұрын

how to add overlay on scummvm or amiga? retroarch menu doesnt appear :(

@dspiraluk 5 жыл бұрын

Hi. What do you do for systems that share an emulator? Ive changed the Mastersystem border but that also changes the 32x border as they both use Pico Drive

@folcochofo Жыл бұрын

Link not working

@Darty83 6 жыл бұрын

Can you get these on recalbox?

@dustinblevins9462 6 жыл бұрын

Just need someone to confirm if you turn display overlays option off that it will remove bezels. Maybe a stupid question, but I wanna know for sure

@andihoar1608 6 жыл бұрын

Dustin Blevins If it's actually saved it will re appear next time u play it, turn it off then save 'core overide'

@dustinblevins9462 6 жыл бұрын

Andi Hoar will do thank you.

@viciousgazza3318 6 жыл бұрын

how can i add it for dreamcast? ty

@chrisconnollyofficial 3 жыл бұрын

The bezels link does not work. Does anyone else have them?

@matthewspring7811 3 жыл бұрын

Do you have a new link to the file?? This one will not work.

@Brewskii2117 6 жыл бұрын

I'm having issues with the gameboy advance fitting within the bezel. I'm using a 4:3 ratio and it's still a little big for the bezel itself. Any ideas?

@Brewskii2117 6 жыл бұрын

Never mind, went with a custom aspect ratio and got it to fit.

@linuxstreamer8910 4 жыл бұрын

MrHArias link is dead

@ahioros 4 жыл бұрын

the domain for download bezels doesnt exist anymore

@reignman40boozer5 4 жыл бұрын

Link is dead on his channel :\

@coinjunkie3906 6 жыл бұрын

In a few hours there will be a game changer dropped for adding custom bezels. Keep an eye out from the Bezel Project :) A custom bezel for every ROM

@ETAPRIME 6 жыл бұрын

Been waiting for a while for it to be released. Can’t wait to test it out.

@coinjunkie3906 6 жыл бұрын

Thanks, it's been a lot of work but it's a passion project :)

@demonprincess5634 5 жыл бұрын

dose not work for me

@kstaggs87 6 жыл бұрын

Is there any way to fix the overlay issue with shared cores? For instance, let’s say I want to use a Sega Genesis overlay on my Sega Genesis emulator, not only will it be on Sega Genesis, but also CD, 32X, and Master System. Same thing with Gameboy and Neo Geo Pocket, the same overlays used for those will also be present on NeoGeo Pocket Color and Gameboy Color. Is there an easier way to set an overlay per system without having to save it per game? I have a bunch of games for all of those and it’ll take forever!

@andihoar1608 6 жыл бұрын

kstaggs87 Yes, Don't save core or game overide go to configuration setup in settings then do each console in there

@manousos82003 6 жыл бұрын

Hey!

@johnwillis1371 6 жыл бұрын

Any way to do this on a mac? I can only see my roms, bios, etc folders.

@PlasmicSteve 3 жыл бұрын

Same here.

@PlasmicSteve 3 жыл бұрын

Okay, got it working - use an FTP client like Fetch and go up from the directory the instructions here put you in until you find the folder he's referring to. Then continue on.

@possiblystevo9141 6 жыл бұрын

FILEZILLA works perfectly on a mac

@DrinkableTrees 6 жыл бұрын

anyone know how to do this for the gba? my aspect ratio is all over the place lol

@andihoar1608 6 жыл бұрын

DrinkableTrees Apply the bezel then bring up the retroarch menu go to video and change the ratio to custom then just below that change the x,y,width and lenght👍

@dauls 6 жыл бұрын

For anyone else looking for this this is what I came up with, Aspect Ratio: Custom, Custom Aspect Ratio X Pos. 608, Custom Aspect Ration Y Pos. 285, Custom Aspect Ratio Width 700, Custom Aspect Ratio Height 475.