I'm working on making some with some 3 to 4 inch rubber pipe adaptors I've got from Menard's. They slip right on. Also Raldey boards sell some that look like they will fit over normal hubs, that are for their mt v3. Not sure if they are for 90mm or 100mm , either way I plan on trying them with my meepo mini.

@@jacksonridermistuffcahinc.3131 please update us if you were able to make it fit,I want one for my meepo v3.

I am also looking for bigger and softer wheels that fit directly on the hub motors of my Exway Flex Hub. Could anyone please make some? :-)

Here what I've got so far. kzfaq.info/get/bejne/fqx-eJiq2tq4XX0.html

Cloudwheels has released a 105mm donut for hub motors, we will stock them soon !

Nice idea, we hadn't thought of that. :)

@@benbucklerboards a shame because the trucks on the Exway are very good, but on my seekerboard, I don't really care. LOL Glad to contribute in same way. Send us an update if you guys come to change the truck on the exway!

@@ttkuratani Will do, thank you!

Thanks!

Meepo v3

Why is it a no go? I got a meepo mini, doesn't seem like it would be hard to change the front trucks at all

I'm thinking of putting cloudwheels on my Meepo Mini 2 ER and CW gave me 2 options: 1.) Change front tires only with 105mm CW and keep 90mm PU at the hub. Option 2.) Change front and rear wheels with 120mm CW but there's 'cutting' of the sleeves I don't quite understand. If it's anything like this video I'd definitely do it. We all change wheels for comfort so wider wheels on the back mean nothing.

Good point. But not an ideal fix here, best to go DD

We think so !

Thanks!

@@benbucklerboards welcome id have to look into this if it will fit some of my boards like meepo v3 and others

Great minds think alike :)

Should do, if you are close to Sydney you can try the fit.

If your hub cover has either 5 or 6 screws it should fit

If you search fro Torx Key Set you should be able to find them easily.

Thanks Matt!

They sell black and transparent (as well as the standard orange) on the accessories section of their website

Or nls pro

@@thomasoleson2651 regular v3

Hello, it's on our website: benbucklerboards.com.au/products/cloudwheel-discovery-120-set-of-4?variant=40509462053040

No we didn't feel like it changed the riding sensation !

you could get a wider truck for the front as well right?

Hello, yes we have it on our benbucklerboards.com.au website for purchase

Yes we've heard of this cutting option, but it sounds complicated and not ideal. Ho many screws are on the hub cover at the back of your board? If it's 5 or 6 this kit should fit

@@benbucklerboards 6 screws. They sent me an email with pictures and the pictures looks exactly how it was done on this video, and easy to understand but the cutting part wasn't shown at all.

@@rufflewater2890 Hey that's strange, the 6 screw kit should work. We though the cutting was only relevant for the donut wheels. Please send a photo to support@benbucklerboards.com.au if you need more help, thanks!

The website link is on our channel page! but here you go benbucklerboards.com.au/collections/wheels-tyres/products/cloudwheel-discovery-for-hub-motors-set-of-4 We also have the donuts in stock now : benbucklerboards.com.au/collections/wheels-tyres/products/cloudwheel-donut-105mm-hub-motor-sleeve

Yes you can :) We recommend Dope Grip - benbucklerboards.com.au/search?type=product&options%5Bprefix%5D=last&q=dope

Should be just like this but with 6 screws for the meepo v3 they sell those just hard to find

The wheels I'm talking about are new..., meepo said you need to cut the old rubber from factory electic wheels and use the guts on the DIY cloud wheels

It is still very good, but now Cloudwheel has come up with the "Donuts" that fit directly onto a hub motor without modification, they will be in stock soon and we'll review them!

Not sure sorry, we’ve not tried that yet

Not sure, sorry :)

Yes it should!

You can hit us up on facebook messenger !

It is.. It's the same as slapping on like 6 wheel extension's to make the car far wider.. will definitely stress everything out.. But this is why I bought A belt drive board so I can use my wind and on road wheel's...

You can pick them up from our website. Search for Cloudwheel pulley kits and select the hub conversion kit.

Hello. I’m sorry we’ve never seen a Jking

Hello James, I'm sorry but we've not seen a Raptor in years, so we can't test that sorry.

We think it would be possible with the 6 holes setup

I'd say go with 105 will have slightly more torque

You just need to count how many screws go into the hub motor do you can order the correct parts on our website. We've not tried this board before though, there are hundreds of cheap boards out there

benbucklerboards.com.au

Cloudwheels for Hub Motors: benbucklerboards.com.au/products/cloudwheel-discovery-for-hub-motors-set-of-4?_pos=7&_sid=f8fad6c01&_ss=r

On our website 👍🏼

It's possible, just count the number of screws on your hub motor !

@@benbucklerboards thanks

We don't stock this model so it's hard to verify, how many screws are on the hub? If it's 5 or 6 it should work

It may help with stability a little bit, but that's not what it's made for. You might want to upgrade your bushings to a harder compound to reduce the wobbles

3D factory AT conversion kit - Look into it.

@@oskvisuals thank you brother

Depending on the number of screw holes on the hub, it could work ! Come in the shop for a test fit!

@@benbucklerboards would love to, I'm based in the UK though.

Hey Jerry! Check our website or the cloudwheel website, Cheers

Via our website: benbucklerboards.com.au/products/cloudwheels-pulley-kits But it looks like we might be sold out at the moment sorry.

where do you get the donuts

We're stoked we could help you, thanks for your feedback!

We've never heard of a good electric longboard under $300 sorry Sergio.

!Meepo V3!

Not sure sorry, maybe check with Koowheel, thanks for asking!

You can get orange cloud wheels, actually there are a few different colours :)

Thanks for your feedback! Yes belt drives offer more flexibility

Yes we will stock them soon ! the donut is only 105mm though, so if you want 120 this solution is still viable

Where are you based? Can we help you in person?

@@benbucklerboards no unfortunately, I live in Pakistan. I tested them out on the road, they worked fine, only they made noise and the wheel nut on one wheel would loosen a little on its own. I cant think of anything I've done wrong, followed every instruction to the T.

I do believe the issue is the main bolt (fixed screw) that’s put in the middle of the red pulley. It wiggles around too much despite every single smaller screw being as tight as allowed. I think this is leading to the wheel nut loosening.

@@OldDolio312 Which board do you have sorry?

@@benbucklerboards backfire g3. So I already redid the wheel that was the issue like 3 times but this time I took the stock wheel off completely, put the screws into place then put the stock wheel on and it seemed to do the trick! No rattle and wheel nut is completely secure too. Super proud of myself lol.

If you see on their page, they also had with 6 lug.

@@Thecreamer666 they don't fit.....👍

benbucklerboards.com.au/collections/wheels-tyres/products/cloudwheel-discovery-for-hub-motors-set-of-4?variant=37276524642480

No idea, sorry Sergio.

@@benbucklerboards I meant to say $600

I guess because front wheels don't have screw holes to attach extra wheels to. You'd need extra wide trucks to make your front wheels wider.

indeed :)

Hi Dinnye, thanks for your contribution! Our of interest, what do you base your claims on? Are an engineer involved in the design of the components? FYI - all the new Cloudwheels have thicker Abec cores, so we're not seeing any breaking cores anymore. We take your general point, so we'll do some stress testing and report back.

@@benbucklerboards I am not an engineer yet, but I am studying to be one. So I am pretty good at physics. I will explain each point. 1, No axle support from the truck means that your weight is supported by the motors. The motors are supported by the axle. The wheels are far from the axle. This creates a lot more leverage on the trucks to bend or break the axle. On my Wowgo 2S, the axle is already loose and a little bent, and is making annoying sounds after normal usage. I have about 1350km on it. With using a mod like this, you are shortening the time the parts break. With an exway the durability should be better because the truck is forged, but after some time it will still be a problem. 2, The adaptor plate is secured to the motor by 5 small screws, each of those screws are holding 1/20 of your weight if you stand in the middle of the board. The weight force you are putting on the screws is perpendicular to the direction of the screws. Screws were not designed to take huge sideways load. If you are riding the direction on the load is constantly changing, so this won't be something you notice until it's too late. And when it will be too late is when you will be going over speed bumps, potholes, dropping down curbs or going through very rough terrain. The screws will just break once the load reaches a certain threshold. 3, The wheel cores can still be problematic in this application. Even though the new cores are thicker, with using this adapter you halve the contact points between the wheel cores and the pulley. This means that in each contact point, there is 2x the normal load. Essentially, this means 2x the chance of breaking the wheels than on a belt driven board. And the wheels were designed for belt drive boards. To each problem, your weight is a multiplier. The heavier you are are, each point I mentioned is just getting worse. For a kid who is 50kg this mod might be completely fine - but for a fat adult who is 100+ kg and is using full speed and full torque... The loads are just too much, and stuff will quickly break.

Thanks for your concern and very in depth comment ! You make some valid points, but we feel like this kit was designed with strength in mind, and maybe able to withstand such forces. As said before, we'll keep testing and keep you updated !

@@benbucklerboards I hope it's strong enough. But with the record that iwonder has, I am pretty skeptical about their products. I appreciate keeping me updated on the durability :)

@@DinnyeYT Well said Dinnye_YT. Does not take an engineer or a physics expert to see that if you place the majority of weight on five small bolts with minimal threading that you WILL strip or break one of this bolts. Also, it does not take an engineer or physics expert to see that when you move the center of support further from the focal point there is more off camber stress on the five small bolts. Who ever thought of this design was an absolute idiot and no one should do this to their board. No only due to wasting money, but also due to safety. I put the cloud wheels on my Backfire G3 and they are designed to replace the original street wheels. Video was well done, but the attitude of and integrity attack by Ben Buckler Boards tells me I may not want to do business with this location.

Hello Jerry, what can we help you with?

Maybe, we haven't heard about any issues yet :)

Maybe, but it's a product that exists and we only hope that we helped you and others make a sensible purchase decision :)

Not sure, we don't have a Meepo with us. Check out the Cloud Wheels website for more info.

@lemonEater where you able to find out if it fits the Meepo V3?

Yeah they are a better solution now, but they don't fit on all hubs

Fair :)

Thank you for your comment :)

Thanks! Our team members are free to use masks as they please. Some people in certain times are more vulnerable to viruses than others so consider that everyone is unique :)

@@benbucklerboards there is no such thing as viruses, this is bigpharma's invention, people are exhausted by the toxins and chemicals in food, cosmetics and the body just gets rid of them that way and these are the reactions. this is the billionth business of Rokefeler's medicine 🤑

I scrolled down more and I saw someone asked about the price for the conversion kit and you provided a link. I think that price is a little too high for me. I may as well get my nephew another board at a later date. He'll just have to deal with the board he has now. Great video though!

Yep that's fair feedback. Raw materials are getting very expensive that the moment.

Ha! Yes well we’re glad we tested it so others don’t need to 😆

dum as in that's 'dope' or dum as in you can't spell dumb?

I bet you your mother spelled correctly 😏 like I said that's a dum design . We going rwb skate boards now wide body lol

Hello! We're sold out at the moment, but keep an eye out here: benbucklerboards.com.au/products/cloudwheels-pulley-kits

Not sure sorry, we haven't tried it