How To Add Lights To Your Iron Man Suit!

Рет қаралды 24,801

2 жыл бұрын

The first 1,000 people to use the link will get a 1 month free trial of Skillshare: skl.sh/franklybuilt07221
Welcome everyone! In this video I'll be exploring the upgrades that I've made to the lights and electronics in my Iron Man Cosplay suit! So many possibilities exist when adding lights to your cosplay and I've gone through man variations. Hopefully in this video I can give you some new ideas on adding these effects to your own!
▼ STUFF IN THIS VIDEO
Cosplay LED Eyes: bit.ly/3PrHfD8
NeoPixel Jewels: bit.ly/3cCqEhw
NeoPixel Flora: bit.ly/3cF3wit
NeoPixel Matrix: bit.ly/3IZ8Dpy
MK85 Build Series: bit.ly/3z5c3m5
Amazon Shopping Cart: a.co/8I3Ugm9
▼ HELPFUL VIDEOS
Cheap Cosplay Electronics: bit.ly/3RWjTqY
How to Code Neopixels!:bit.ly/3PRwnOE
Motorize Iron Man Helmets!:bit.ly/3vcvsjU
Cosplay Electronics Live Tutorial: bit.ly/3z5sZZV
Cosplay Electronics for Dummies: bit.ly/3z39Ckf
Flexible Cosplay LED Eyes: bit.ly/3Bi1sat
▼ SHOP MY CUSTOM BUILDS!
Etsy Shop | www.etsy.com/shop/FranklyBuilt
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
CREALITY | bit.ly/3gV8iIo
☞ Visit Creality for my favorite FDM 3D printers, from entry
level to advanced!
EPAX 3D | epax3d.com?ref=25
☞ Visit EPAX 3D for my favorite resin 3D printers!
Use code “franklybuilt” for 10% off of E10 Series Resin Printer
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 20% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
NIKKO INDUSTRIES| www.nikkoindustries.com/
☞ Use Code “Franklybuilt” at checkout for 20% off awesome files!
▼TIME STAMPS
0:00 - Intro
Disclaimer- This video is sponsored by Skillshare.
Honesty is very important to me and my channel- I do my best to remain unbiased and all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
#IronMan #Cosplay #Lights

Пікірлер: 133

@FranklyBuilt 2 жыл бұрын

The first 1,000 people to use the link will get a 1 month free trial of Skillshare: skl.sh/franklybuilt07221

@angelguerrero2890 2 жыл бұрын

I hope you read this comment it would be cool if you put small rechangable roman candles tube in the middle of the repulser to shoot a plasma shoot a update to the suit or a wrist fire shoot gadget for magic

@Dat_Thing88 2 жыл бұрын

Can you get 3d printed stuff wet and how durable is it and is it ok to put my meat in it if you know what I mean 😏

@tigo0314 Жыл бұрын

I am just about finish with my daughters ironman suit for Halloween. Thank for all the videos from start to finish has been a great help.

@catermeep1100 2 жыл бұрын

I was about to comment requesting this video lol love ur vids keep doing what you do!

@chrislmink 2 жыл бұрын

Awesome video as always. Learned a couple of things, but congratulations on the 520,000 subscribers 👏 I can't wait to see what lays ahead when you go full time, it'll be off the chain buddy. So glad I've been on this journey with you you've taught me so much and for that thank you Frank for all you've done for this community ❤️

@finalnick 2 жыл бұрын

16:11 imagine going to Frank’s comments just to call him an idiot. Great job as always. I really admire the direction your channel is going.

@QS-si3cq 2 жыл бұрын

Love your channel and all the content. As a big fan of the comics way before he became as popular as he is today, I started my first Iron Man suit back in 89 with some moldable art store foam when I was 14. It wasn't pretty, but included some internal fans and push/tap lights. I later went on in the 00s to high quality Bat and Spider suits, before selling it all and taking a long hiatus. Awesome to come back to doing research on doing a quality Iron Man suit today and seeing all of the available tech and best practices available. Thanks and keep up the great work!

@mikecaratone7072 2 жыл бұрын

Awesome video as always! Congrats on the 520k subs and being able to dive into this as a full time career. Can’t wait to see all the future content! Keep crushing it Frank!!

@CdrCARN 2 жыл бұрын

Frank. Your videos and streams have given me the correct information to proceed with my project. Congrats on the growth of your channel. Well done and thank you.

@diamondgigabite9065 2 жыл бұрын

Frank you are amazing! You’re the one who inspired me to get a 3D printer and your videos have helped me so much!! Thank you

@zachmhuber 2 жыл бұрын

Dude! I’ve needed this tutorial ever since I started making my suit. Thanks man!

@heresjhonny702 Жыл бұрын

That led for the eyes was a game changer to me, thanks!

@gavinwilson5530 2 жыл бұрын

Dude congrats on going full time, you earned it! Love your content! It’s so helpful!

@livmor3442 2 жыл бұрын

Been rocking with this channel for a while. Definitely a favorite. Thanks as always for the helpful content for us that love this hobby.

@JonathanCase12345 2 жыл бұрын

I remember using tons of tap lights in sooo many projects, really cool to look back and see where I was vs where I am at with my knowledge of electronics. So thank you for that!

@muuricane_ 2 жыл бұрын

Thank you! This helps me out in my cosplays a lot ☺️✨

@telmacastro7375 2 жыл бұрын

I dont know your channel for to long but it didnt took me much to realize that you earned the amount of subscribers you have. Stay strong, build strong.

@matthewviars6349 2 жыл бұрын

Can you plz do a Spider-Man suit

@MinimoGaming97 2 жыл бұрын

Congratulations and going full time! Love the videos i have been really enjoying this hobby and because of this I'm gonna be making a lot more fun things!!

@gran9144 2 жыл бұрын

An excellent teacher! Keep up the good work.

@projectprinting2191 2 жыл бұрын

This helped a lot! Electronics is where I struggle ( my father is an electrican so that helps) but i will be re watching this many times for when I update my lights in my suit 👍🏼😎 thank you for this

@douglasrobitaille7122 6 ай бұрын

Lots of great info thanks.

@chipr7074 Жыл бұрын

i bought a 10,000 dollar suit,, thought it would be perfect spending that much cash, not so this suit has never worked properly ! So your vid is of great help a great place to start ..

@hamburgerbuns9752 2 жыл бұрын

flawless timing

@chaddrake1276 3 ай бұрын

The mark 85 looks awesome

@noahtech3663 2 жыл бұрын

This is the one part of cosplay that is hard for me so thanks for sharing

@jimmyjohansson84 2 жыл бұрын

Great video, just the kind of led info I like! Therefore, no calling you an idiot!

@robertoadorro 10 күн бұрын

Awesome!

@jonathansteinhaus2475 2 жыл бұрын

Nice work on the suit

@KurtisJoseph 2 жыл бұрын

I just realized one thing. Making Ironman suits is a hobby in and of itself, and 3D printing is just a part of it. I have tons of these suits to print out now. I doubt I will do them all in a lifetime. I need to get a CR 10 S Max just to print Ironman. If I don't Batman and Red Hood and Dr. Fate will feel neglected. You teach the electronics and motors well. I really appreciate that now that I am dipping my hands into THIS specific hobby. This ain't just printing and finishing. To scale or not to scale? That is the question. Something is telling me to maybe look at the length of specific parts to allow for ease of movement. Starting my first one Monday. Oh my gawd, all this slicing is going to be impossible to organize. Lol!

@rotorrabbitfpv 2 жыл бұрын

Love your channel!

@Ultramarathon_Wolf 2 жыл бұрын

Another great video frank. What is the website that you got the files for the suit? Could you send that? Could you also send the link for the gloves? Those are sweet!

@MrCowboyYeeHaw 2 жыл бұрын

It’s when you see these amazing things people do with 3D printers you wish you weren’t broke.

@Gpope1979 2 жыл бұрын

It was so cool meeting you at GalaxyCon this weekend! Thank you for the selfies and the autograph!

@FranklyBuilt 2 жыл бұрын

Oh no problem!!

@voulx3562 2 жыл бұрын

Hey Frank, I’m in the Army and my MOS is a 91E. The MOS deals with additive and subtractive manufacturing and surprisingly at the end of my 5 1/2 month course there was 3D Printing and that would be added to the course at a later time. Since then I’ve been hooked on 3D Printing and you have inspired me to Print things for myself; I am about to start printing my first Ironman helmet. Thanks You for all the videos you post. Would it be alright if I messaged you on FB about a future project that I might do that seems pretty interesting ( well, at least for me) ?

@pacoryu Жыл бұрын

Love your channel and everything you share, thanks for helping us make our builds. I have a questions, whats the USB battery pack you use to power the electronics?

@shreygupta1914 10 ай бұрын

Great video. How do you light the eyes and still see through?

@BanishedBuilds 2 жыл бұрын

you can remove hot glue a lot easier by spraying Isopropyl Alcohol on the hot glue before pulling it off

@Etj1013 2 жыл бұрын

Hi! Love your content man. I have a question though. I'm brand spanking new to 3d printing, like I haven't even gotten my printer yet new, and I was wondering how I would spot if something went wrong in a print. There are obvious things like gaping holes where there shouldn't be, but how do I spot the more subtle stuff, and how do I even know if it's a mistake or not? Hope that makes sense.

@Eythor20 5 ай бұрын

Hi frank! Would one alisha board be enough for the helmet motorization, LED eyes, Neo pixel arc reactor and hand repulsors or would i need two seperate boards to power the helmet and body?

@theultimatespring9017 2 жыл бұрын

Hey I am right now planning making an iron man armor and I've been confused on the helmet like besides the face plate do you have to put the helmet together like meld it or do you 3d print it completely

@perrywheeler4455 2 жыл бұрын

Hi Frank, thanks for the awesome video! is the arc reactor just clear PLA?

@FranklyBuilt 2 жыл бұрын

Clesr plastic

@DannyMcHugh Жыл бұрын

I see the Power supply link in the video description, but what cord/how do you connect it to the dollar store 3-pack push light?

@alvialamgir4016 Жыл бұрын

Hey frank! In the video you mentioned you’d drop the file you use to code the neopixel with crashworks but I don’t see it. Is there a file that allows me to code the helmet and arc reactor lights to work off of one Alisha board?

@imDADDY375 2 жыл бұрын

You should build Links sword from Legend of Zelda. And thank you for your service, I had no idea you are in the military

@tigo0314 Жыл бұрын

Hi, I can't seem to find the Google drive folder with the code for the arc reactor.

@dungeonsandsorcery8773 2 жыл бұрын

I would love to see you make the fusion sword from FFVII Advent Children with the swords detachable, the main sword expandable and the smaller swords able to flip the handles.

@2fwelding842 Жыл бұрын

Why not hollow out under you pads, remove infill and inner panel after the fact. Even if only 1/4 inch that fits all small parts without using any inside space

@deeznuts23yearsago Жыл бұрын

I’m building a halo reach armour set and I never really noticed how many lights bungie put in that armour

@KarsonEnglund Жыл бұрын

Does the ALISHA board control the color or do I need to program them first?

@chrisdawson8340 2 жыл бұрын

could you do shang chi's rings that go on the arms that would be amazing!!!

@ImmortalReaver 2 жыл бұрын

Great video! I've done lights in my Halo and Genji cosplays and I'm currently working on a Master Chief build that I'll be using lights for. My light work was barbaric before but it worked. But I can also recommend A23 batteries to people if they need a 12v source. I use A23 batteries to power my lights and I have it so simply that there isn't even a toggle switch, just pop the batteries in or out. They last the entire weekend at a con no problem.

@TheEvanight 6 ай бұрын

What is the best pla to use for lights? I’m doing a Godzilla cosplay and his fins need to glow blue but I don’t know what color pla I should use that is transparent enough for the light to shine through

@sigmachad1177 2 жыл бұрын

Quick question what's the strongest you can make your prints ?

@patchtechuk 2 жыл бұрын

Hi Frank! Love your channel! Like the idea of the led board you used for your Arc reactor in your suit, can i ask what did you use to diffuse the light, I've tried led diffuser sheets but you can still see the leds through it. Any tips would be very appreciated. Many thanks

@patchtechuk 2 жыл бұрын

ok so figured it out. Looks awesome!

@Bobisfunny3887 Жыл бұрын

What do you use

@mikeygarcia1638 2 жыл бұрын

You should try to 3D print the mark 5 iron man helmet and make the face plate able to do what it does in the movie

@AlfonsoSalaverria 4 ай бұрын

What gauge wire do you use to connect everything?

@soggytoast3111 Жыл бұрын

What do you use to diffuse the LEDs?

@peebs2424 2 жыл бұрын

Can you recommend any online learning for coding these neopixel lights? I coded in high school but forget most of it. A lot of the KZfaq videos I’ve found are 3-4 years old now. Also I couldn’t find the google drive with the code your using for your suit in the description section?

@abranramos1170 2 жыл бұрын

Hi u have a store for the stl files

@CarsonCreate Жыл бұрын

Hey! I have no idea if you would see this or not but I’m having trouble with my lights but only because they keep heating up so much the come undone and unsolder and it feels like I’ve tried everything to stop it but nothing has worked yet so if you have any idea please let me know

@darc0615 Жыл бұрын

Hey man! Amazing content as usual. I want to start planning out my mk85 lights to sketch it out and see what I need. Do you only use 1 crash works board to run all the lights on the suit? And if so which one? Does that also run the servos and eyes or is that a separate board. And what type of power do you need to run all that? For the looks of it in the video, it seems like it's one board and one battery running it all. Ty for the help

@FranklyBuilt Жыл бұрын

Yep you just need one board. I show it in the later stages of my MK85 series

@darc0615 Жыл бұрын

@@FranklyBuilt thank you! I'll check that out

@darc0615 Жыл бұрын

@@FranklyBuiltI went through a bunch of videos and the playlist for the 85 but I don't see it. I see the last video of the series talks about the spikes and one board running the chained lights, but doesn't go over the main board running it all or type of power. Would you be able to tell me which video you were talking about please? Also here you mentioned posting the codes you use to run your lights on a Google doc, but I don't see it on the video info. Is it somewhere else? Thanks again for all your help and all you do, you rock man

@MikeH1 2 жыл бұрын

So is all the software like thingiverse and slicer ect free

@daremo50na76 2 жыл бұрын

I’m not even close to lights yet but I have a question already. Are your hand lights setup individually or chained to come on at same time? I’d like to set them up so one or both can be activated but separate from each other.

@FranklyBuilt 2 жыл бұрын

They’re individual

@sampicken4713 2 жыл бұрын

I’m hoping to make an iron man suit and I was wondering, would clear filament at 100% infill be a good way to scatter the light from the led and make it look like the whole thing is a light source instead of looking like one led from behind it. Or is it smarter to do what you did with the infinity stones but with a clear or coloured mix?

@FranklyBuilt 2 жыл бұрын

Nah that may be a little To solid

@Isidore22 2 жыл бұрын

I am struggling with 12v versus 5v power consolidation. I can't figure out how to power multiple lights with one power source/bank without light dimming due to amp output limitations. My EL tape and wire lights are noticeably dim when I connect more than one. I am trying to use rechargeable rc car batteries from Amazon now, but need the right connector to test that. How do you get around the amp limitation on power banks or your battery source?

@FranklyBuilt 2 жыл бұрын

RC batteries or LiPo batteries aren’t really the best for this due for that reason. Have you tried wiring them in parallel vs series?

@Void_pineapple 2 жыл бұрын

I just watched the first video on wiring the helmet, but you never say in the video what plastic you use for the moving parts (arms, etc) I assume you use PLA for the outside of the helmet though? Love the videos btw, cleared up all my questions other than this one.

@Zero-xm3mw 2 жыл бұрын

What paints and sanding equipment do you use for you 3D prints.

@FranklyBuilt 2 жыл бұрын

Check the rest of my channel 😁 tons and tons of tutorials

@noelperez3 2 жыл бұрын

I’m currently fixing my fookoos 3d printer cuz it busted, anything fun you think I should start to try and print?

@3DCreations_ 2 жыл бұрын

Hey Frank, I'm just curious, when ordering the Alisha board mark 6 I have the option to get the PENELOPE aswell. Do you know what it does/ if it is a worthy purchase?

@FranklyBuilt 2 жыл бұрын

Penelope helps keep the usb battery packs alive and on

@3DCreations_ 2 жыл бұрын

thank you so much

@someonerandom1159 2 жыл бұрын

Legitimate question, what software should I use to begin 3d printing, I’ve tried things like tinkercad, but I wanted to use something that gives a lot more freedom and customization when I’m designing and creating

@FranklyBuilt 2 жыл бұрын

Fusion360 or blender

@kashey5362 2 жыл бұрын

Hay frankly built I was wondering do you think I could print you red hood helmet with my ended 3 pro printer

@FranklyBuilt 2 жыл бұрын

Yeah you can

@Zero-xm3mw 2 жыл бұрын

What websites do you use for 3D models because I want to 3D print in general but have found a liking for helmets.

@FranklyBuilt 2 жыл бұрын

Do3d, Instagram, cgtrader, Etsy

@ehgamer8170 2 жыл бұрын

What software do you use

@mtflims4092 2 жыл бұрын

Hey Frank! I’m getting into 3D printing, and I am heavily considering buying an Elegoo Neptune 2s. The biggest things I’d want to make are standard sci-fi helmets. Do you think this printer will serve me well?

@Whatisyourmajormalfunction 2 жыл бұрын

I would say if you are on a budget than yes. I bought my 3d printer to make helmets too, so I bought a cr-10 v3 cause its bigger and could make most helmets in one go

@FranklyBuilt 2 жыл бұрын

Yep all the time

@overboss111 2 жыл бұрын

Hey I have an ender 3 and the filament keeps bubling up on the nozzle does anyone know what I should do

@tallbrosasquatch1384 2 жыл бұрын

Do I have to have a big computer to 3d print?

@WhaleCows 2 жыл бұрын

so I want to make a suit but its kind of an obscure character, and I couldn't find any files anywhere. could you recommend anyone i could commission the model from?

@joshuakirkland2747 2 жыл бұрын

I’d hit up Walsh 3d but not cheap I’d assume hard work

@SaidLopez909 Жыл бұрын

Was there no Google drive folder with the coding? 5:40

@navirj3103 2 жыл бұрын

I have idea, you make power armor from fallout Pacifically, t-60 from fallout4.

@RacingChampGamer Жыл бұрын

Where do I order electronic board included wires led lights ,sound for Mk3 and servos for the helmet good quality send me s link thank u

@learningtolivewithhumans1859 Жыл бұрын

im building an iron man mk 85 to sell to raise money for myco heroes uk,s free cancer medicine project! this is going to help me so much bro thank you! i have autisum so i strugle with things techy lol, i cant thank you enough and you get my sub for sure

@camtron1967 2 жыл бұрын

I’m 14 and I want to make a suit but I don’t know if I show wait until I am fully grown. Frank want do you think ?

@FranklyBuilt 2 жыл бұрын

I would wait until you’re grown

@camtron1967 2 жыл бұрын

@@FranklyBuilt ok thanks for the advice. Luckily my head is the same size as my dads so I made an iron man helmet that is motorized and is on my channel

@ehgamer8170 2 жыл бұрын

What software you use

@FranklyBuilt 2 жыл бұрын

For what?

@logan397 2 жыл бұрын

Hey can you make a space marine chain sword

@Ambroseslayer8020 2 жыл бұрын

Can you make more Star Wars three printed Hellmets

@qiaozhang6779 2 жыл бұрын

Great！I'm Hellen from Zbanx. Can you care about orange 4K? I'm really looking forward to your video.😀

@InkBendy-gq2eg Жыл бұрын

Where’s the link for the code on Google drive?

@Cyberi0nix597 2 жыл бұрын

i got a question : are you planning to make more suits and gadgets from heroes and villains ? if you are PLEASE I BEG YOU KNEELING MAKE A BATMAN SUIT FROM THE ARKHAM GAMES OR THE MOVIES 😭😭😭