How to adjust a Cricket regulator using a 1/16" pin to 120-140b

Рет қаралды 24,766

Ernest Rowe

9 жыл бұрын

Пікірлер: 17

@junerson1942 5 жыл бұрын

galing!

@MrLing13579 4 жыл бұрын

Do I need to cooperate with the spring force of the plunger spring to increase the pressure of the pressure regulator valve?

@vectorkimo3447 6 жыл бұрын

Could you please make a video how to change caliber in the cricket?

@elprincipiante8302 7 жыл бұрын

Hi. I wanted to know how many millimeters you have in 130 bar?

@PeakyBlinder 3 жыл бұрын

my law in uk says under 12 fps what pressure should the reg be set at for 12 feet per second please

@wewekokowe6887 8 жыл бұрын

so clockwise increases output pressure. right these need a vent hole on the cylinder or not? any idea if the Vulcan regulator is the same? thanks

@ernestrowe5061 8 жыл бұрын

+weweko kowe yes need a vent on AT, Vulcan same design .

@PeakyBlinder 3 жыл бұрын

how many ft/lb is 138 bar

@shooterstan69 Жыл бұрын

Hi Ernest Can You Please Help. Can You Please Give Me Measurements For My Regulator. And Hammer Spring For My Vulcan 3 .25 In (FAC). As I Am Having Problem Finding Sweet Spot.

@kurucacikinoko 6 жыл бұрын

hi. what is the best pressure or fps for most (i understand sweetspot could be different) for hunting in .25 using jsb 34grain? cheers

@gogle 6 жыл бұрын

depends on barrel length, most common is 135 ---150

@wewekokowe6887 8 жыл бұрын

sorry opposite. counter clockwise increases pressure output

@alamsyahsibolang73 3 жыл бұрын

hi sir, nice to meet you I am alamsyah from Indonesia, may I ask a little about how to set the kricket 177 Kalibrgun regulator output if you don't have a tester.

@ernestrowe5061 3 жыл бұрын

Hi, the easiest way is fill gun to 140-150b shoot gun till the speed drop off the rainbow look at gauge pressure and add about 5bar - thats where reg set at.