Did this like you said although mine were in the door frame, fabulous can't tell you how much money you have probably saved me as I was considering changing my gorgeous door. Thank you so much.xx❤

I'm 50 years old and never knew this! Thanks for teaching this old dog new tricks.

This is the sort of stuff they should be teaching in school instead of the shite that passes for education nowadays. Imagine most of us have lived our lives not knowing this (me included).

I'm 300 years old and never knew this! Thanks mate!

I'm 41 years old and never knew this! Thanks for the tip

Stumbled across this vid and wow! 3 years of wasted energy because I had no Idea this setting. Thanks for the advice. You have gained a subscriber!

What a brilliant and clear video! Thank you so much for solving the problem of my draughty back door. You’ve gained another new subscriber here.

I’m 57yrs old and I didn’t know this, why aren’t we ever told this when the doors/windows are fitted.? Great video and thanks, oh I have just found your channel and I have subscribed 👍👍👍👍🙏🏻🇬🇧

Very easy and informative video. I now do not have a draft anymore ..THANK you!

I've read so many "I'm a heating expert and here are my tips on how you can save hundreds of your heating bill" articles in the press and NONE of them have ever mentioned this tip. Excellent work, Fix It!! 👍👍👍

This video just changed my life forever 😊

Always wondered what those were for now I know. Dude you are the Jedi master of uPVC doors.

Best thing ever was trying to get the door to seal with the winter breeze fixed my door perfectly no drafts thank you very much for sharing how to do

Thank you for this video! Saved me paying a professional for a 2 minute job!

Unbelievable. I've got a draught around my lock on the front door and I thought it would need a professional to sort it or a new door and was about to check my local trade guys when this clip literally popped up. Absolutely brilliant stuff, and done in a way that even I can grasp it and feel comfortable trying it ! Defo gonna have a look at your slab laying vid too. Subscribed and a big thank you !

Holy crap this info was so useful. I have a uPVC stable door and always wondered by the top half rattled. I had the top half set for summer and bottom half for winter. Thank you! 👍

I never knew they can be adjusted on the handle side. I’ve been trying to sort my front door for years. 👍🏻

Easiest draught proofing I've ever done great tip many thanks

Thanks for the great tip! The gap between my kitchen doors wasn't huge, but still big enough for my wife to get back in 👍🏽

So happy I found this video, hope it is solved my problems and save energy

Stumbled across this video, could not believe it. Never had a clue, thank you!!!

learn something new each day. Also, the information about it fitting tight is very useful, particularly in summer.

I already knew to adjust those for a tighter fit . But thanks to you I now know there's 3 different settings . The main problem I've always had is the seal above the door isn't so flush with the frame .

Brilliant, I was on another channel and most of the comments including some from fitters said it was fake, well it's just worked a treat, subbed

Summer and winter setting WTF, 30yrs in the fenestration industry including fabrication and not once I have heard that lol, the adjustment allows for compensation as the gasket compresses over the years.

This is a very old 😎method ,I'm glad more people can use it now 👍💪🛠️

wow just set to winter thank you so much

Mate... 47 and this just blew my mind. Cheers. 👍

Wow! I never noticed this. Have just adjusted our back door, which has been draughty for years!

Great tip !! Had a draught at the top of the door for ages now it’s cured thanks 🙏🏻

So glad your video came up in my suggestions. One minute with an Allen key and the draught from the front door is finally gone. Thank you and a deffo thumbs up and subscribe from me 👍

Great discovery. Going to do mine in the morning.

Brilliant can't fault you one bit,was wondering why it was cold in my kitchen all the time, your video popped up and solved the problem 👍

Funnily enough figured this out the other day looking at the door and wondering if it was adjustable I saw some little cams and hex nuts. Different to yours but similar idea. Turned them and lo and behold, tight seal. Despite being quite handy I'd not known this. As regards the post below, school taught us to be inquistive and methodical so I guess that helped me figure it out, but then I did become an engineer.

Well I’ll be blowed, changed the rubber seals last summer but never fully successful, still a bit of a draught at the top, now got a job at the week end, bet this cures it, thanks for sharing and subbed 😃👍

Salute you Sir, never noticed they were cams, adjusted all the windows and I’m sure it’s a quieter now so therefore must have eliminated some draughts. Many Thanks subscribed!

Thanks very much for this indepth explanation. I knew how to adjust my draughty conservatory door horizontally and vertically but not how to pull it tighter to the seal. Following your instructions has sorted it out perfectly 👌

They do say that every day is a school day. I've just learned something, I now have my job for today.

Thanks Fowler, I didn’t know about those summer/winter adjustment cams. Thanks for sharing!

Mines been loose for months, check it out in the morning 👍 subscribed on the strength of the info and presentation 😂😂

Well oil beef hooked! (Irish accent) I never knew you could do that!

Thank you for the explanation and demonstration - easy when you know how. Cheers!

Ta .. I always wondered what those doobreys were for. I thought they were part of the locking mechanisms. 😆

Thank you so much, never knew about this feature.

Just had a door fitted.Had a look and noticed two of the cams are set off center about 11 oclock and the bottom one is set at 5 o clock position.Thanks for the interesting video.

Also need a video tutorial to adjust the door hinges on a PVC door 👍

As the title said windows, I was hoping you’d cover an opening light’s adjustment. Cheers.👍

If the door or window has dropped then you must reglaze it properly using toe and heel method before attempting this. When adjusting them try one cam at a time because you'll find the handle will be tougher to throw up (don't pull up the handle from above, always use the ball of your hand to push up from below, much easier, especially with arthritis) and if the handle doesn't travel all the way you'll struggle to turn the key in the barrel, so go gently and imagine the cams as a clock, 12. 3. 6. 9. Hr setting and going in-between these hours is absolutely fine. Also spray the lock barrel and moving parts on the door lock and window hinges with WD-40, using the supplied straw is best, couple times a year as they can go dry and seize up. JUST REMEMBER WHEN ADJUSTING DOORS AND IT SEALS BETTER, YOU MUST TRY LOCKING WITH THE KEY! IF KEY NOT TURNING AND THE LOCK BARREL IS DEFINITELY CENTRAL AND RETAINING SCREW TIGHTENED THEN REVERSE SLOWLY YOUR ACTIONS ON ONE CAM AT A TIME UNTIL YOU HIT THE SWEETSPOT OF THAT KEY TURNING SMOOTHLY AGAIN TO LOCK.

Can’t wait to to see more videos

Good tip Mr. Fowler, well presented.

Thank you very much, every day is a School day : )

I’ve never heard this before. Top video.

His smile is a dead giveaway knowing his door latches is borked haha

I'm going to try this!

I did ! And like given. BTW these are what I have “taken” not “took”. (Thermal images)

Im 60 and didnt know that. 👀 👍 Thank you. (Subscribed)

Brilliant video, i didn't know you could adjust the door like that! Suppose i better check mine now!

this needs checking out before running to the DIY store for new gaskets and seals!

legend cheers mate my adjustments were on the actual door frame

As many have said above, I never knew about this! Got another new subscriber 💪

Today I learned something. Thank you.

hi well what a star you are no messing told the truth how to stop the draught thank so much so much so informative.

Love the content. You jumping behind the door to say subscribe made me! Look forward to watching more handy tips! 😊

Well, well, well, I never knew this. My front door has always been draft free at the top but drafty at the bottom, I can now see that those adjuster things are actually set differently! Nothing worse than a drafty bottom 🤭

Wow man, I never knew this. I thought they bits on the door were just something to do with the locking mechanism 😂😂🤦 cheers 👌

I will give that a try my friend.

🤯 I had no idea this ever existed. Fantastic video. Subscribed and going straight in for some more videos now….

I’m a locksmith and although this does work you have to be very careful you’re not putting to much pressure on the handle to engage multi point system , also you’re door could do with updating , it’s very old basic multi point lock with rollers and mushrooms form the 80s early 90s old butt hinges and only looks 70 mm thick ,

Thank you so much. I never knew about this and I was wondering how to fix the draught. Many thanks

Thanks mate, Just moved in here bloody Drafty and door handle are a bit floppy. I was told al[l double glazing plus doors were fitted about 15-20 years ago

Had no idea these existed, clicked subscribe👏

Nice and easy to follow, appreciate the guide!

Smashing pal thanks That’ll stop the draught no end 👍

Never knew that until now😊

you learn something new every day!

Thanks learned something I didn’t know there

Winter/summer "SETTINGS " WHO KNEW! 😮

Thanks for this....never knew about this. Cheers👍

That's brilliant thank you for the tip as I have done this for my doors and windows

Big up from Scotland

nice and simple, thank you

Thanks this was most helpful 😊

Give them a spray of oil too .makes lifting the handle easier after adjustment

Spot on watched this and fixed my Front Door top man for posting

Stumbled across your video from the homepage of KZfaq. Thank you for sharing this tip, most of my windows were set to summer setting and I'm hoping it stops my neighbour's secondhand smoke coming in! Don't happen to have any tips on preventing secondhand smoke coming through floorboards?

I can't believe I didn't know that; but I didn't! I do now mate so thank you... subscribed. ❤

Great easy video, thanks pal! I think door is bowed to much to fix like this though. I adjusted and pulled in the mounting bracket on the door frame as well and the gap is still there 😢

Worked a treat, cheers!

ta muchly mate now have a none drafty backdoor. subbed as well. Once again ta muchly

You just blow my mind mate 😮

thank you never knew that got to be worth the try

Great video. Learnt something new. Concise and informative

i had no idea will try this at weekend many thanks

Hi Steve great advice xx

Wow i never knew that good man :)

Cheers fella, good to know.

I never knew this ! Cheers I’ve Subscribed Quinny

I needa authentic fixer in my home!🫨 Thankyou!🌸

Nice one. Thanks. 👍

Well done lad, I never knew this