How to adjust the laser beam path

No video

How to adjust the laser beam path

Рет қаралды 44,759

Күн бұрын

1. Check the first mirror
Requirement: Laser beam should dot to the first mirror center.
Laser power: 30%
repare double-sided adhesive
Tear off two small pieces
Stick them with each other.
Paste to the first mirror, and press the adhesive out of profile with nail.
Laser beam dots to the first mirror.

Пікірлер: 15

@mikecarrigan5836 6 жыл бұрын

I use 3mm clear acrylic with some double sided tape when I do this. You can see the laser pulse mark easily and you get to keep the mirrors clean - bonus...

@maksimsoft 7 жыл бұрын

insert the aluminium foil between paper. smoke makes the dirty mirrors

@ibromehic6765 3 жыл бұрын

On the second mirror im only able to focus 3 dots at squares 'not the 4 dot in the lower right edge of the machine

@shannonmarie6227 2 жыл бұрын

In step #1, what do you do if your pulse is not centered??

@Skuza1995 5 жыл бұрын

Why at 0:48 we can see before first mirror some think seems be another mirror? and black square near to this thing? Its for what? Im newbie and I want to educate something :) Please answer if anyone know.

@thunderlaser.official 5 жыл бұрын

Bundle mirror. Compensation of Beam Divergence and Optical Inhomogeneity in a CO2 Bundle with Phase Conjugating Mirror

@Skuza1995 5 жыл бұрын

@@thunderlaser.official Thanks a lot for fast answer. I must learn a lot :)

@christianvazquez907 3 жыл бұрын

Distance between laser tube and first mirror?

@HeartlandMakesAndOutdoors 4 жыл бұрын

On a new machine, is this something that will need to be done when it arrives at my place or is this general maintenance after you have been using it for a while? Thanks Dale

@thunderlaser.official 4 жыл бұрын

The machine will working well when you receive it.

@thunderlaser.official 4 жыл бұрын

Our Nova laser systems come preset and tested through our quality assurance program. Thunder Laser machines come with a water chiller, air compressor, exhaust fan, tool box with all accessories needed to set up and run.

@HeartlandMakesAndOutdoors 4 жыл бұрын

@@thunderlaser.official Oh thank you, I mailed my check to my guy here in the USA yesterday, I hope to be in possession of my new Thunder by mid April. I believe that is the target date, we are so excited and looking forward to working with yall. I will be doing some videos on our youtube channel with it. I hope it helps others as well. Going to be a really fun and epic year adding this to our leather shop, so excited. Thanks again for all yall do and have a blessed week my friends. Dale

@thunderlaser.official 4 жыл бұрын

@@HeartlandMakesAndOutdoors Good job. If you have any question, just contact us freely.

@carlosmonster624 7 жыл бұрын

buenas tardes donde podria adquirir las lineas guias por donde se desplaza el lapiz gracias

@thunderlaser.official 7 жыл бұрын

Sorry，we do not speak Spanish and the Google translate couldn't make clear. Can you explain more? Lo siento, no hablamos español y el traductor de Google no pudo aclarar. ¿Puedes explicarme mas?