Straight down to the point and not like others trying to show off their tools
@bthncdl Жыл бұрын
Very helpful video. One of the mechanic guy told me today they need to replace my gearbox lol !
@okinawanah3463 Жыл бұрын
this is very helpful for people that drive mostly freeways and not as much deliveries bumping docks like Sysco 10-30 drops a day
@r0ckworthy Жыл бұрын
Great video, thanks! Pro tip: people watching this might need some penetrating oil on that screw and nut. The best penetrating oil that won a shootout on KZfaq is called Deep Creep by Sea Foam. Squirt some of that on the nut and screw and wait 5 minutes or so. Then take a large flat-head screwdriver and a wrench and loosen the nut on the screw, while you hold the screw in place with the screwdriver. Set the screw where you want it to adjust free play like in the video. Then hold the screw in place again with one hand and tighten the nut with the other hand, which locks the screw in place real nice. That penetrating oil also greatly helps to prevent further rust from building up.
@marioguapoak9952 жыл бұрын
I love your video bro. straight to the point no B.S.😍
@deadnuttsfosho7 ай бұрын
Just that easy Love the video an very informative...I just bought a 1989 Ford 150 van with a 302...my van has soo much play this will be my first step..
@papergatorzfedducca79984 жыл бұрын
Thanks been looking for this video!!!
@us18wst124 жыл бұрын
No problem!
@coalwagon4 жыл бұрын
Hey brother keep the flat blade on the screw as you tighten the nut. When your removed the screw driver and tightened it, the screw moved about 1/2-1 more turn with the lock nut. Good video cheers
@blackpowergod2104 жыл бұрын
So that screw isn't supposed to turn when you tighten the nut. Mine turn with the nut do you think the nut is seized around the screw?
@coalwagon4 жыл бұрын
Condo yea bro hit it with some wd-40 or pd blaster and break your lock nut free of the adjuster screw. So that way you can lock the nut down to the new adjustment on the screw 🤘
@blackpowergod2104 жыл бұрын
@@coalwagon thanks bro!
@filemonshitaleni13983 жыл бұрын
@@blackpowergod210 it will turn with the nut if you dont hold it still with the flat screwdriver. Holding it still with the screwdriver while tightening the nut helps you keep your new adjustment in spec.
@jessicaripley56543 жыл бұрын
Lol he probley does man he was holding the camera no way to hold that and screwdriver to
@ciaranhewitt10442 жыл бұрын
Thank you you saved me a lot of money with this video :-)
@cheesepark37872 жыл бұрын
Great video .. I have a 2014 Volvo vnl day cab and i have a lot of play ...I'm going to try and fix mine first thing in the morning
@ArditRamaj Жыл бұрын
Did you fix it?
@ryandungy1513 жыл бұрын
So helpful mat, thanks!
@johnM-Jr2 жыл бұрын
I thought you thigten the adjuster in till it stops then back it out a half turn or so. Then hold w a screwdriver and tighten the jam nut.
@sergiygryf19186 ай бұрын
Thank you !
@geoestrada5001 Жыл бұрын
I own a 2018 t680 Kenworth and it’s looks same problems , so you just lose the screw and then tighten back again, I will work on it, thanks
@johnnybigmack13325 ай бұрын
Very simple and easy. At least you're bolt is on the outside. On Peterbilt 379 this bolt is on the inside of frame and your fuel transfer pump is in the way of getting to it😂😂😂
@mjyouletstalk.67244 жыл бұрын
Thank you sir really helpful Thanks again 👍🏼
@us18wst124 жыл бұрын
Always welcome
@jadb84523 жыл бұрын
i tightened it all the way, and still have some play, is that means the gear box is bad?
@corneliuiftode1317 Жыл бұрын
Thx!
@quocbinhduongnt86464 жыл бұрын
thanks anh nhiều vì nhờ có Internet nên em mới biết anh
@mansorkhaan3 жыл бұрын
It was really hopeful
@100pyatt10 ай бұрын
What does the other screw do that has the cap over it?
@467inc Жыл бұрын
perfect video
@PaulMcLove3 жыл бұрын
👍😉😀
@allanmclachlan53253 жыл бұрын
Thanks bro
@judejuju5072 жыл бұрын
👍👍👍
@emadmatareiah62822 жыл бұрын
Can do it video For Freightliner Columbia
@skotasail5 жыл бұрын
Will this adjustment same for Kia ceris van 22hp
@us18wst124 жыл бұрын
Almost.... Lol
@TolaTrucking4 жыл бұрын
Can a TRW gearbox be adjusted? I don't see an adjustment screw ... Pete 387
@dennissmith4604 жыл бұрын
It's on the back side of the housing behind the sector shaft. There are other videos about TRW steering box adjustment out there. If you over tighten the adjustment screw you can damage your steering gear.
@dennissmith4604 жыл бұрын
kzfaq.info/get/bejne/et-jhMqDltrUcqc.html
@TolaTrucking4 жыл бұрын
@@dennissmith460 thanks but my gearbox it is different..I don't have that adjustment bolt
@trevorbyron94483 жыл бұрын
What vehicles this off
@gregoryharris43432 жыл бұрын
My gear box doesn’t have that bolt right there where else would I adjust it at
@HondaAholic Жыл бұрын
Wherever the shaft the pitman arm goes onto, that shaft goes through the gearbox, and on the otherside is your adjuster. Freightliner is on the inside, there's a hole in the frame.
@vroor32 Жыл бұрын
@@HondaAholic my man!!! ....thank you. I was wondering the same damn thing. Sending Much blessings you way.
@HondaAholic Жыл бұрын
@@vroor32 Glad I could help!
@thebaycuddy Жыл бұрын
I don’t have free play but my steering feels heavy
@dell7054Ай бұрын
mine too did u get it fixed
@Jersey-hd2tn Жыл бұрын
that’s how it should be
@michaeldunagan82683 жыл бұрын
Uhm... ... actually, the important place not to have free-play in is the sector-shaft which the pitman arm attaches to. To properly inspect the sector shaft, the drag week must be taken off the pitman arm. Then the pitman arm is to be moved forward and backward and then left and right. Any lash in any direction requires the adjustment you shut the video of. ------- I am jealous that you have adjustment screw availability privilege. I have to drain the power steering fluid, disconnect hoses, disconnect the steering shaft, and then I had to take the power steering box off because the adjusting screw up on my tracker is on back of the box which is up against the frame.
@manuelsalgado85102 жыл бұрын
What kind of truck is that?
@brkbrk52052 жыл бұрын
volvo vnl
@yoelrodriguez86963 жыл бұрын
ZNK,
@yanchantha29573 ай бұрын
Your video is very fruitful, I did so and the mechanic guy said my steering gearbox need to be replaced.
@cuttheloop2 жыл бұрын
You accomplished nothing... you're supposed to hold the center (flat head screw_ in place while loosening the outer nut, THEN loosen or tighten the inner flat head bolt, THEN hold the flathead in place while re-tightening the outer nut. What you did is a real good way to lock your steering or fuck up up your gear box.
@vroor32 Жыл бұрын
Give it a break, the man has 2 hands only ... One for the camera one for showing us how it works
@user-xp7er5rn9nАй бұрын
It doesn’t help me please elaborate next time you DYI.
@tonygill28692 жыл бұрын
Totally unprofessional , there's a lot more to steering system freeplay than just cranking a screw without a thorough inspection. Get a professional mechanic to check & adjust your sector shaft . Too many google mechanics unwittingly contribute to sertious collisions
@marshaison94365 ай бұрын
Took ours to a truck center. Said they e never heard of a set screw to reduce play in steering… Part changers.
@zonechaser1Ай бұрын
It’s a TRW adjustable steering box. That is exactly how it was designed to work
@Rocksteady176 Жыл бұрын
Taking advice from someone who cant use a crescent the right way!🤣There is more to it than what he hacked!