You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: kzfaq.info/get/bejne/hcigfruo17Scpac.html You can find more videos on Pioneer's KZfaq Channel here: www.youtube.com/@pioneerelectronics

Ric Vieira yea you need a usb Yes you need an iPhone for apple car play Apple maps is amazing Just use android auto

In the United States, this will work with your iPhone 8 plus. It will work with your vehicle. Installation will be required. You can find a video playlist about AVH-4201NEX here: kzfaq.info/get/bejne/rLR4eNmkv5uue5c.html

I'm not aware of any setting that switches the microphone off.

You can find more How To videos with very similar operation to Pioneer AVH-4100NEX in this Pioneer You Tube Playlist: kzfaq.info/get/bejne/bLyJZJOmqM6yhH0.html Please be sure to install the latest firmware for your Pioneer AVH-4100NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-4100NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Please be sure to have the latest version of iOS installed on the iPhone Please restart your iPhone. Turn it off and back on. . This will often help to correct simple issues like this. Here is a video about setting up your Pioneer AVH-1300NEX to work with Apple CarPlay: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html If this setup operation does not work, Press the microprocessor reset button on the in-dash receiver. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer AVH-1300NEX on the hard key panel near the eject button. Please be sure to have the latest firmware installed on your Pioneer AVH-1300NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-1300NEX#downloads I recommend to try a different USB to Lightning cable for the connection from the phone to the receiver. Just because a cable will charge the phone does not mean it will carry data. When you plug your iPhone into the receiver through USB are you using a USB extension? Or a USB flush mount in the dash? Or other type of USB extension? A USB port/extension can often be the connection issue. If so, please try a different USB extension cable. Or get a long USB to Lightning cable and plug directly into the back of the Pioneer AVH-1300NEX and use no extension at all. You can find more How To videos about Pioneer AVH-1300NEX in this playlist: kzfaq.info/get/bejne/hcigfruo17Scpac.html You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

No. Pioneer AVH-A3100DAB is not compatible with Apple CarPlay. One possible European model Pioneer in-dash receiver with CarPlay and DAB is here: www.pioneer-car.eu/eur/products/avh-z5200dab You can find more videos about Apple CarPlay on Pioneer in-dash receivers here: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Dear saintly_guy, Apple carplay doesn't work on AVH-299BT. At least you must have AVH-Z2050BT or another, If any have "works with apple carplay" logo

Pioneer AVH-1300NEX works with the USB Wired version of Apple CarPlay only. Pioneer AVH-1300NEX DOES NOT work with Wireless Apple CarPlay. You can learn more about Pioneer AVH-1300NEX and connecting with the USB Wired version of Apple CarPlay in this video: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html You can find more videos about Pioneer AVH-1300NEX in this playlist: kzfaq.info/get/bejne/nrtxfbOf26mxl5c.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Plug in your phone and open the drop down source list. Do you see "iPod 1 or iPod 2" ? If you see iPod 2 then your USB is plugged into USB port number 2. If you don't see any iPod listed in the source list, you might have a bad cable. Use only an Apple certified cable.

Deckerd Otto I figured... It says iPod 2... Gonna take it apart and switch the cables around. That should do the trick yes?

iPhones must be connected to USB 1 not USB 2.

On the in dash receiver, Is CarPlay switched off? Check the video at 3:15. To remove variables, try the cable that came with the phone plugged directly into the in dash receiver.

Hi, I'm pretty sure, the installer plugged the supplied USB cable into the wrong USB port in the back of unit. Should be the top USB port! Thx...

USB 2 is only for External devices*/Android Auto While USB 1 is for External devices*/Ipod iphone, and also Apple carplay *: Such as portable HDD, and Flash drives

Touch the "Mode" hard button on the in dash receiver.

The same thing. It goes back to Apple car play screen after probably less than a minute.

As long as they Have lightning port and later version of IOS, it's okay

@@adrianusthemcpeguy17 - I made this comment 3 years ago. You’re right, but I hope he still doesn’t use a 5c in 2020 😂

@@Michael-tk3vc yeah, maybe he got Xr or 8+

The Pioneer AVH-1550NEX works with Apple CarPlay with a wired USB connection from your iPhone directly to the in-dash receiver. You'll need to plug in your iPhone to the receiver's USB port, and CarPlay will automatically start. You can see this demonstrated in this How To video from Pioneer: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html The AVH-1550NEX has a USB port on the back of the in-dash receiver. You can see it in this Unboxing video from Pioneer: kzfaq.info/get/bejne/rreepdqJuODceac.html A USB extension cable was included with the receiver. I understand this vehicle is new to you after the receiver was installed. In a typical receiver installation, the USB extension cable is routed from the back of the receiver, to the vehicle's center console, or glove box, or another area that is out of the way and yet easy to access. Look for the USB extension cable in these areas. If you find the USB extension cable, simply use your iPhone charging cable to plug into the receiver. Please be sure to install the latest firmware for your Pioneer AVH-1550NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-1550NEX#downloads You can find a full playlist of How To videos from Pioneer about AVH-1550NEX here: kzfaq.info/get/bejne/hcigfruo17Scpac.html You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info

can you confirm is you can delete the app?

You can delete apps from your phone.

Deckerd Otto I did eventually a while ago but that wasn't the point. If both apps are available in all the NEX models they should work properly without deleting either app. After deleting Pandora and reinstalling it back, it now works without having to switching.

Other than that you still love it right?

Not while using Apple CarPlay. The AVH-4200NEX has HDMI input and AV RCA input. Your wireless receiver can connect to one of those inputs. You can see the inputs on the AVH-4200NEX here: kzfaq.info/get/bejne/f59ndJV2ub26daM.html

Yes, iPhone X works exactly as you see in the video above. The latest in dash receivers will also work wireless with Apple CarPlay. Check out this video for more information on the Pioneer AVH-W4400NEX kzfaq.info/get/bejne/g9GHmcmnmNymZoU.html

No. Not in CarPlay. It works in Android Auto. kzfaq.info/get/bejne/odZ7jM6kkpebl4E.html

It's been announced that Waze will be compatible later in 2018. www.theverge.com/2018/6/4/17416932/apple-carplay-third-party-maps-wwdc-2018

I'm not sure I understand the trouble. Do you mean no sound from FM radio no sound from USB no sound from apps or no sound from phone calls? First try to restart your phone. Is the volume up on carplay?

Please contact our Product Support at 1-800-421-1404, select option 1.

Wireless CarPlay is available in several different Pioneer in dash receiver models: You can see it here: kzfaq.info/get/bejne/g9GHmcmnmNymZoU.html

Same.

Here is a video explaining how to set up Apple CarPlay on your Pioneer AVH-1300NEX: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html Be sure to use a proper iPhone cable plugged into the USB port with your iPhone 5 or higher. Be sure to have the latest firmware installed for your Pioneer AVH-1300NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-1300NEX#downloads You can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Are you asking does the AVH-X4600BT work with Apple CarPlay? No, it does not. You can find more information about Pioneer in dash receivers that work with Apple CarPlay here: kzfaq.info/get/bejne/lbZjksSBqbKvYnk.html

Apple CarPlay is not desinged to play videos. You can see the Pioneer AVH-2300NEX playing videos from usb here: kzfaq.info/get/bejne/gb2RjMmK0J-UeYk.html

No it will not work with an iPad. Apple does not allow it. iOs for iPad does not include Apple CarPlay.

The Pioneer AVH-4200NEX has 2 USB Ports on the back. You can see the USB ports here: kzfaq.info/get/bejne/f59ndJV2ub26daM.html Only USB One can be used with Apple CarPlay. USB 2 does not work with Apple CarPlay. When you plug your phone into USB What source are you using. Is it USB1 or USB 2? Press the source drop down list and choose the USB 1 Source to be sure. Only USB 1 works with Apple CarPlay. Be sure CarPlay is switched on. You can see it here: kzfaq.info/get/bejne/nZuaqMR8s77WaWQ.html If this does not correct the issue, please change to a different USB/Lightning cable. Use the cable that came with the phone. Just because a cable will charge the phone does not mean it will transfer data for CarPlay. Plug the cable that came with the phone directly into the back of the in-dash receiver USB Port 1. Be sure to have the latest firmware update on your Pioneer AVH-4200NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-4200NEX#downloads You can find more videos about AVH-4200NEX operation here: kzfaq.info/get/bejne/bLyJZJOmqM6yhH0.html and you can find more videos on Pioneer's You Tube Channel here: kzfaq.info

Lies

lies since Siri know's your voice compared to someone elses. Nice try though.

Restart your phone. Have you done the latest update for the in dash receiver? You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-4100NEX#downloads Check the cable used to make the connection from the phone to the in dash receiver. Cables can fail over time. You can find more videos similar to AVH-4100NEX here: kzfaq.info/get/bejne/o66gicmg2svTdXk.html

There is an option for android on Pioneer receivers. It's called Android Auto and you can find it here: kzfaq.info/get/bejne/bLKUZ92J0bSno6s.html

No. The Pioneer AVH-X490BS does not work with Apple CarPlay. If you are looking for a Pioneer receiver that works with Apple CarPlay there are many to choose from including Pioneer DMH-W4660NEX here: kzfaq.info/get/bejne/eJiEh8l7uqqRlac.html or the Pioneer AVH-2500NEX here: kzfaq.info/get/bejne/aKxyqamd0ZyrlaM.html. You can find more videos on Pioneer's KZfaq Channel here: kzfaq.info