How to apply HTV to a Shirt and know it's adhered

  Рет қаралды 181,735

Cuttin Corners Vinyl

Cuttin Corners Vinyl

7 жыл бұрын

99% of the vinyl I use on my channel is Specialty Materials Brands I have tried many kinds over the years, and they are my absolute favorite. The quality is top-notch, I have a video where I wash a shirt 50 times, and the vinyl still looks brand new. • Thermoflex vs. Siser: ... They have the most extensive range of products and colors around ( there are over 90 colors in the ThermoFlex Plus and GlitterFlex Ultra lines alone). They also offer free product samples on their website, which you don’t see anymore. Trust me, request a sample because if you try it, you will know why I love it.
Request a Free Sample:
specialtymaterials.com/reques...
Specialty Materials :
specialtymaterials.com
* I DO GET FREE PRODUCTS TO TEST SPECIALTY MATERIALS TO TEST, BUT I STILL PURCHASE 95% OF MY VINYL. I WILL ALWAYS TELL YOU WHAT YOU GET FOR FREE. *
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Affiliate Links (I Earn a Small Commission if You Use Them) :
My Amazon Store (Has most of the things I use unless I state otherwise) :
www.amazon.com/shop/betsygotcher
Vinyl, Heat Press, and Cutters :
Non-Affiliated Links:
HeatTransferVinyl.com (carries all Specialty Materials Products):
www.heattransfervinyl.com/
Affiliate Links (I Earn a Small Commission if You Use Them) :
Heat Press Nation :
shrsl.com/3t4xq
15x15 Heat Presses:
shrsl.com/3t4up
16x20 Heat Presses:
shrsl.com/3t4vb
shareasale.com/r.cfm?b=113707...
Cricut:
cricut.pxf.io/5bEr9b
Sublimation Blanks and Supplies:
Links (I Earn a Small Commission if You Use Them) :
Conde: Use Code: CPN-CCV22 $5 off $50 purchase:
shrsl.com/3mxhs
Koala Sublimation Paper: Use Code: Betsy15 to Save 15%
shrsl.com/3mxhk
Design Software and Commercial Use Fonts and Graphics:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Creative Fabrica:
www.creativefabrica.com/ref/1...
Artwork created by me (unless otherwise noted) is available on my Patreon page:
/ betsygotcher
Screen Printing:
Affiliate Links (I Earn a Small Commission if You Use Them) :
Ikonart Smart Screen Stencil: Use Code: CuttinCorners for 15% off
ikonartstencil.com
Find me on social media:
Instagram: / cuttincornersvinyl
Facebook: cuttincorners
Cuttin Corners Group on Facebook: / cuttincorners
Betsy's Bees (a fun place to hang out and share your crafts): / 260612806191309
I can't thank y'all enough for sticking by me through hurricanes and health issues, and everything in between. It means the world to me all the love and support that I have received throughout the years.
XOXO,
Betsy
Specialty Materials, #cuttincornersvinyl, Heat press Nation, Cuttin Corners Vinyl, heat press nation 16x20 signature series

Пікірлер: 174
@patriciavanlierop6540
@patriciavanlierop6540 7 жыл бұрын
I just love your videos!! U do an amazing job!! keep em coming so inspired. And Your Customer Service is also top notch!
@hessa288
@hessa288 6 жыл бұрын
I just found your videos and I LOVE them!!! I've been learning so much!! Still learning about htv but now I DEFINITELY want the siser easyweed!
@kelleym9923
@kelleym9923 7 жыл бұрын
I love that you showed the "to know if it's adhered " part that helped a great deal still new with my press p.s. huge fan 😊
@pietros9236
@pietros9236 6 жыл бұрын
Not easy !!!!
@yemarican
@yemarican 4 жыл бұрын
Thank you very much. You did a wonderful job here and I appreciate it. What you said at the end about applying enough pressure is very important and valuable to know. Thanks again :)
@laurawidgeon2287
@laurawidgeon2287 7 жыл бұрын
I loveeeeeee that electric red !
@tammymcclure6540
@tammymcclure6540 7 жыл бұрын
Love Love Love the electric red! And thank you for showing do to measure a tee. I love your ruler and I will be ordering me one!
@vanessahooper3934
@vanessahooper3934 7 жыл бұрын
Thank you so much! I've had a really tough time with getting a certain white Sister easy weed to adhere and I'm hoping your method will work for me. Such great tips!
@shereehood4371
@shereehood4371 4 жыл бұрын
Loved the design, especially with the red. Love the tutorials!
@Marlene4377
@Marlene4377 6 жыл бұрын
Great video. Love your sense of humour!
@cynthiajarecki6868
@cynthiajarecki6868 3 жыл бұрын
I'm new at the Cricut world and HTV-your video was super helpful!
@cinabun2
@cinabun2 7 жыл бұрын
I have seriously been binge watching your videos for 3 days!! Love them! I don't have my cutter yet, waiting to get my financial aid back from school next week! But would like to see how you would do more than one layer of Htv with a home iron. My family is buying me a heat press for Christmas, so I will have to use an iron in the mean time!
@yvonnem2619
@yvonnem2619 6 жыл бұрын
you can def buy a cricut or silhouette if you dont have money for a huge cutter. I got my cricut from Amazon for $150
@surfgal77
@surfgal77 3 жыл бұрын
I love YOUR shirt!! It’s beautiful 🤩👍🏻👍🏻👍🏻
@AlexanderChavez-ep8yu
@AlexanderChavez-ep8yu 6 жыл бұрын
LOVE THE COLORS AND THE DESING 😍👍
@Angel-zg7ds
@Angel-zg7ds 6 жыл бұрын
Thank you. I’ve wondered about seeing texture in the htv. It’s also nice to know that layering can be a pain for everyone. Could you use your shirt liner up thing with the easy press??
@solosapp8554
@solosapp8554 6 жыл бұрын
I have a 5 foot roll of the electric red.. awesome color
@humttydoo6804
@humttydoo6804 6 жыл бұрын
Good work. Really looks legit👌
@mandyn8663
@mandyn8663 6 жыл бұрын
New to your chanel and Cricut...great tutorial ty ty x
@JelscreationsNmore
@JelscreationsNmore 2 жыл бұрын
Thanks for showing this I have been pressing mine the time it says then pressing again. Sometimes a third time is that to much I'm scared the time it says isn't enough I'm new at this
@chil5434
@chil5434 6 жыл бұрын
thank you for sharing the video. this is a good work. what you can have various experiences on how to apply the cost to produce shirts with some colors like your video? does it look pretty expensive to use this material with some color? thanks
@sandyhamblen8166
@sandyhamblen8166 6 жыл бұрын
Love the red!
@wendymilleravenue7photography
@wendymilleravenue7photography 7 жыл бұрын
can you list out the different shirt brands you use and where you purchase? thank you! love the tutorials too :)
@Adventuresover40
@Adventuresover40 6 жыл бұрын
I love the shirt your wearing
@Smilelyme
@Smilelyme 5 жыл бұрын
Betsy love your videos! Did you make the shirt you're wearing? Also how do you create layers on the siloughette?
@tammybeichner5763
@tammybeichner5763 5 жыл бұрын
Love this design
@vespahitam5471
@vespahitam5471 6 жыл бұрын
I love this heat press
@anabarr2942
@anabarr2942 2 жыл бұрын
Good informative video question is does temperature vary from type of garment? What about stretch garments? Sport jerseys with holes?
@turtle2778
@turtle2778 7 жыл бұрын
very informative. thanks
@pen25
@pen25 6 жыл бұрын
this looks great. i am just getting interested in this. question i have is couldnt you layer this before pressing? or does each layer have to be pressed?
@WarVet1984
@WarVet1984 3 жыл бұрын
Wow this is the first time i hear someone say that if we did not like the video we can give it a thumbs down, just because of that i gave it a thumbs up and i like the video also lol great job!
@DrunkCookies
@DrunkCookies 3 жыл бұрын
"not difficult to do" (proceeds to have difficulties) :D all good, still a great video!!
@CuttinCornersVinyl
@CuttinCornersVinyl 3 жыл бұрын
It always harder on camera
@YoshiXO
@YoshiXO 3 жыл бұрын
Bwhahahahaha exactly I’m all getting frustrated cause it’s taking so long to get to the end product
@nathanbird8921
@nathanbird8921 7 жыл бұрын
Hi! This has prob been asked before but what is the machine that in beside your heat press? And the machine next to your mug press that was shown in a video? Thanks for the videos!
@carlosgarcia-wr3ss
@carlosgarcia-wr3ss 6 жыл бұрын
I am trying to start my own bussines, and I would like to know what program you use to do your designs and what cutter you use to cut the vinyl
@Samibelle
@Samibelle 4 жыл бұрын
New subscriber. I love it. Thanks for sharing..can you tell me the brand of you heat press, where did you buy it? Thanks
@debbieward4933
@debbieward4933 6 жыл бұрын
I love that electric red
@Mrcherrardcohen
@Mrcherrardcohen 6 жыл бұрын
How do you determine the correct sizes of your designs for the various size t-shirts?
@boanerges9388
@boanerges9388 6 жыл бұрын
Hi. How much is that machine worth? And also the printer. Thank you
@letriciapicon7226
@letriciapicon7226 5 жыл бұрын
Very nice! Can you do a video on how to design it?
@lindalinneberg1381
@lindalinneberg1381 5 жыл бұрын
Where does one get that file? Has a man who loves electro in orange, so this one would have been perfect for him 😍 Hope you never give up making movies, watching and watching everything you make and just getting more inspired to make things self 😃🥰
@pytricewilliams4469
@pytricewilliams4469 7 жыл бұрын
Good video, as usual.
@thecherrybowl5170
@thecherrybowl5170 7 жыл бұрын
Hi Betsy! Does the same rule apply for Easyweed? Im noticing that my easyweed stays very flat and shiny at 305 for 12 seconds. Thanks!
@rachelperkins4664
@rachelperkins4664 4 жыл бұрын
Helpful tips!
@elfcraftvinylswindon4014
@elfcraftvinylswindon4014 6 жыл бұрын
Thanks:) 2 questions. Which vinyl is good to layer & which is better to slice? Is the scrapbox available to people outside USA. I'm in UK:) x x I
@kmom311
@kmom311 6 жыл бұрын
Great video, thanks
@sinfronterasjimcharles3508
@sinfronterasjimcharles3508 6 жыл бұрын
Waoo eso es sorprendente .... Como se llama el material q utilisas ...??
@wilmaburns9678
@wilmaburns9678 5 жыл бұрын
I like this design.
@katherynmccune9724
@katherynmccune9724 4 жыл бұрын
Love this!
@StaySchwiftyCo
@StaySchwiftyCo 5 жыл бұрын
when transferring the red onto the shirt for the full 15 seconds, does the transfer plastic not leave a line pressed into the black htv?
@onblastgmtpodcastradio5035
@onblastgmtpodcastradio5035 6 жыл бұрын
Great idea
@valeriehofmann2615
@valeriehofmann2615 5 жыл бұрын
Do you find threading the platen. helps with press lines?
@reneewooden9088
@reneewooden9088 5 жыл бұрын
You r so darn good.
@yolandapierce4258
@yolandapierce4258 4 жыл бұрын
Would heating in twice cause it to be over heated? Causing it to like buckle? I'm always unsure if I should heat for the full time twice.
@viktorperalta3090
@viktorperalta3090 6 жыл бұрын
To print vinyl for garments the ink of the printer has to be necessary solvent ink or can i use inkjet?
@Truecrimequeen68
@Truecrimequeen68 6 жыл бұрын
Can you tell me what your mug machine is called that you use?
@ashleygray9894
@ashleygray9894 6 жыл бұрын
Where did you get your tshirt guide?
@MRFIXIT-rh7dm
@MRFIXIT-rh7dm 6 жыл бұрын
what type of press did you use? very nice video!!!!!!!!!!!!!!!
@bernardendaya8
@bernardendaya8 6 жыл бұрын
where did u buy uy handy dandy ruler please help mewhere to find it
@deborahcopenhaver7370
@deborahcopenhaver7370 6 жыл бұрын
I thought you could press too much? I have a hard time with vinyl sticking even with my heat press. How can you tell about pressure with a heat press. Thanks
@emmanuellopez3898
@emmanuellopez3898 6 жыл бұрын
This helped me alot thank you
@itsmejoe1401
@itsmejoe1401 5 жыл бұрын
I saw your comemnt in the other video before(the man with the same tutorial) that same way same lesson but u said it is not good and hard to understand and now when the lady do the same u coming and saying something sweet hahah u smart guy huh haha
@robertt8862
@robertt8862 3 жыл бұрын
Great video, thanks. However, none of the other heat press gurus on here recommend to press it twice... is it really necessary? Would anyone happen to know?
@bettydechaume334
@bettydechaume334 7 жыл бұрын
What machine do you recommend to start out with?
@sasha6261
@sasha6261 6 жыл бұрын
I really had trouble lining this up properly and I can’t figure out what the white and grey layers were for?
@phototec
@phototec 6 жыл бұрын
What brand of HTV do you use (electric red black)? Thanks
@colleenjohnston2138
@colleenjohnston2138 4 жыл бұрын
What fabric type relates to the approximate temperature for the 300° on a heat press?
@fashionicon1727
@fashionicon1727 6 жыл бұрын
How I can get the to buy I loveeee it
@desiraerandall2171
@desiraerandall2171 7 жыл бұрын
how did make the shirt you're wearing?
@prisilamunoz4402
@prisilamunoz4402 6 жыл бұрын
how with what name can I find those transfers in amazon
@zillahedghill1135
@zillahedghill1135 6 жыл бұрын
HI! I would like to know what Font this is?
@christincasey7949
@christincasey7949 7 жыл бұрын
What cutter do you recommend
@sev8414
@sev8414 4 жыл бұрын
Do You have a video on How to do that "best dad" cut file or design in design space? :) it's looks pretty cool 👍
@mskikimount4713
@mskikimount4713 6 жыл бұрын
What transfer paper did you use
@glennspeeds
@glennspeeds 5 жыл бұрын
Where did you get the T-shirt guide ?
@freakinowned
@freakinowned 6 жыл бұрын
What's the best htv to use
@hunaizshahulhameed1843
@hunaizshahulhameed1843 6 жыл бұрын
If i want to buy printing machine which one is better. Iliving india.
@sandraalcala7293
@sandraalcala7293 3 жыл бұрын
What heat press are you using ??
@garzausn
@garzausn 2 жыл бұрын
Does it stretch? Does it feel heavy or like it’s natural?
@antonioemerson201
@antonioemerson201 3 жыл бұрын
How u get dat black part like dat?
@canaress
@canaress 4 жыл бұрын
love it.
@sandokhanriverarodriguez1191
@sandokhanriverarodriguez1191 5 жыл бұрын
Kind of press is that?
@jamesfoglejrkingstabledjgm4850
@jamesfoglejrkingstabledjgm4850 3 жыл бұрын
What press are you using?
@barbara34810
@barbara34810 4 жыл бұрын
Hi, Please Help! After washing and drying my shirt two times my Siser HTV cracked, Split in half on a letter. I pre pressed Bella Canvas, temperature and time wash correct. Pressure was at 8 using a Geo Knight press. I can see the fibers of the Shirt REAL GOOD. Is it to Hot? Or Pressure to much? I normally would not dry my shirt, but if I sell them the customers might dry there shirt. So I am testing to see how it holds up. Htv was two layers pressing first layer with a 1-2 second tack and then second layer with 1-2 second press, peel carrier sheet and then press for remaining time. Thanks for any help. I did not use a lint roller.
@mulaaroyalty7517
@mulaaroyalty7517 2 жыл бұрын
Did you solve your issue? Im having the same probLem
@reubennjomo4258
@reubennjomo4258 3 жыл бұрын
That heat press machine!!?... wow!
@karendeboer1835
@karendeboer1835 6 жыл бұрын
I want to purchase a tee shirt guide. I saw different guide sizes on your website. What are the guide sizes for an adult and infant?
@CuttinCornersVinyl
@CuttinCornersVinyl 6 жыл бұрын
You buy it for the width of your heat press.
@karissagwin1058
@karissagwin1058 5 жыл бұрын
May I ask why your pressing at 330 degress? I thought the temperature for the siser easy weed regular and electric is 305? I have been having issues with my Siser stretch peeling off but only with thin and cursive/swirly fonts (examples of fonts im having issues with it sticking are nouradilla, noteworthy, Amastery script) so any help would be AMAZING!! I have customers shirts I keep fixing but it wont stay :( I do medium pressure (unless its Siser stretch I do a firmer pressure) 15 seconds at 305 degrees. Thanks in advance to anyone who can help :)
@Truecrimequeen68
@Truecrimequeen68 5 жыл бұрын
For Htv always weed on right or wrong side? Does it matter?
@TruthSeekerNC
@TruthSeekerNC 5 жыл бұрын
I LOVE the red vinyl! My hubby doesn't really like glitter either but my brother-in-law doesn't mind a tiny bit on a shirt. I love glitter and I like the little bit of pizzazz the shiny vinyl gives too. Thanks for the helpful tips also. The tip about the amount of pressure applied causing your vinyl not to adhere is priceless. :-)
@tammytownsend4765
@tammytownsend4765 6 жыл бұрын
How do you do photo
@larrymoremckenzie3029
@larrymoremckenzie3029 4 жыл бұрын
Easy to adhere vinyl,show transfers!
@nilajastates4807
@nilajastates4807 6 жыл бұрын
So where did you get the two layer image from and how did you it
@CuttinCornersVinyl
@CuttinCornersVinyl 6 жыл бұрын
I created it
@JO86666
@JO86666 5 жыл бұрын
Just curious why your pressing at 330 degrees? Isnt' easyweed supposed to be at 305 temp?
@fayeb1376
@fayeb1376 6 жыл бұрын
Where do I get a t-shirt guide?
@Truecrimequeen68
@Truecrimequeen68 6 жыл бұрын
She sells them on her website.
@samking618
@samking618 2 жыл бұрын
My question is regarding Reflective heat transfer sheet. The problem is once its washed, looks like the print is loosing its reflective ability (NOT peeling off, print area is intact still) Is it due to washing conditions or it isn't pressed properly? I think I press it like 3 to 5 sec, should I press for 10-15 sec to avoid it? Or its just due to wash?
@CuttinCornersVinyl
@CuttinCornersVinyl 2 жыл бұрын
reflective does wash off a little bit each time. Due to what makes it reflective ( i think it's a certain pigment or crystal but I'm not 100% sure) but it can't completely sit into the vinyl or it wouldn't be reflective.
@yummy5704
@yummy5704 7 жыл бұрын
How do you know that is your center of the shirt with guide? Is ur guide the size of your machine? My machine is 15x15. Your guide seems to be 12 inch
@CuttinCornersVinyl
@CuttinCornersVinyl 7 жыл бұрын
Yummy it's 16 in and we have 3sizes available 12,15,and 16
@jimmys511
@jimmys511 2 жыл бұрын
That electric vinyl is nice
@bensoriunchannel1720
@bensoriunchannel1720 7 жыл бұрын
Great!!
@leslimireles8831
@leslimireles8831 2 жыл бұрын
So I did a shirt the other day.. it looked great but as soon as I put it in the washer and dryer the letters started wrinkling up and coming off. I used siser vinyl .. idk if maybe I applied too much pressure or not enough
@CuttinCornersVinyl
@CuttinCornersVinyl 2 жыл бұрын
Did you see the texture of the shirt showing through?
@Herhard22
@Herhard22 7 жыл бұрын
Where do you order all of your blank shirt/tanks from?
@CuttinCornersVinyl
@CuttinCornersVinyl 7 жыл бұрын
+Herhard22 I order them from the manufacturer
@ewet7381
@ewet7381 6 жыл бұрын
What font did you use
@collettegay1432
@collettegay1432 5 жыл бұрын
DENO CHHOEUN I would like to know also
@YoshiXO
@YoshiXO 3 жыл бұрын
Is it 4 fingers for small hands 😩😩
@AuthenticLifeNow
@AuthenticLifeNow 5 жыл бұрын
I apologize if this is somewhere in the comments already, but where did you get that t-shirt guide? Thanks in advance.
@AuthenticLifeNow
@AuthenticLifeNow 5 жыл бұрын
Ha. Never mind. Found it on your website!!!! Thanks.
@alexlugo7647
@alexlugo7647 5 жыл бұрын
I'm curious to know why you heat press at 330* when Siser Easyweed recommends 305*. Have you had it peel up at the recommended temp?
@Fireymidget
@Fireymidget 5 жыл бұрын
I would like to know this to. It's been asked before but never received a response.
Layering HTV in 45 Seconds
0:46
HeatPressNation
Рет қаралды 21 М.
How to apply HTV with a normal iron - easy tutorial! ✂️✨
0:37
Happy Fabric UK
Рет қаралды 16 М.
DAD LEFT HIS OLD SOCKS ON THE COUCH…😱😂
00:24
JULI_PROETO
Рет қаралды 15 МЛН
Alex hid in the closet #shorts
00:14
Mihdens
Рет қаралды 11 МЛН
Iron Chin ✅ Isaih made this look too easy
00:13
Power Slap
Рет қаралды 34 МЛН
Basketball Defense Fundamentals In Under 60 Seconds
0:47
ATTACKBball
Рет қаралды 207 М.
How to apply HTV to cotton canvas shoes
8:43
Cuttin Corners Vinyl
Рет қаралды 79 М.
🦇 How to Layer HTV on a Shirt
0:15
Design Bundles
Рет қаралды 4,7 М.
🧢 How To Use The Cricut Hat Press With HTV
0:16
Design Bundles
Рет қаралды 30 М.
How to Use Cricut Iron-On Heat Transfer Vinyl
0:31
So Fontsy
Рет қаралды 39 М.
How To Layer Heat Transfer Vinyl ( 6 Color Extreme Layering)
18:37
Cuttin Corners Vinyl
Рет қаралды 81 М.
How to piece in your HTV
13:52
Cuttin Corners Vinyl
Рет қаралды 191 М.
Опасность фирменной зарядки Apple
0:57
SuperCrastan
Рет қаралды 3,2 МЛН
Don´t WASTE FOOD pt.2 🍕
0:19
LosWagners ENG
Рет қаралды 54 МЛН
Когда вода попадает в нос при плавании
0:35
Silver Swim - Школа плавания
Рет қаралды 4 МЛН
Mom's Unique Approach to Teaching Kids Hygiene #shorts
0:16
Fabiosa Stories
Рет қаралды 28 МЛН
Triggle #настольныеигры #boardgames #games #игры #настолки #настольные_игры
0:48
Двое играют | Наташа и Вова
Рет қаралды 11 МЛН
Love conquers all rules?
0:26
Den Do It
Рет қаралды 12 МЛН