A tip for the fusso coat users if you are also after the gloss enhancement . After 24hrs of curing, i suggest use fusso speed & barrier for gloss enhancement. That will serve as the sacrificial layer as well as prolonging your fusso/sealant wax.
@JS-bf9dw Жыл бұрын
Thank you, sir!
@thomashansen387510 ай бұрын
Right ! The Speed and Barrier ist The only and right Detailer for The Fusso Coat.
@TKsw191145 Жыл бұрын
Getting the applicator damp prior to application makes it easier to spread thinly and remove.
@Zwikster Жыл бұрын
Performs just as good as a ceramic coating for a fraction of the cost and much easier application. I use it all the time in Canada to protect against our salty/Sandy winter roads!
@APASSIONFORDETAILING Жыл бұрын
Ahhh I no its great right no faffing about no issues with weather and having to let it cure 24 hours it's perfect. Thanks for watching
@DjNikGnashers7 ай бұрын
I use Soft99 Fusso Coat as a base wax, with Soft99 MirrorShine as a topper. For the money, I don't think it can be bettered, although it isn't going to last 12 months, unless you never wash your car. To be fair, Bilt Hamber double speed wax, is just as hydrophobic, and costs half the price. and lasts 4-5 months. It is a bit sticky to remove though, and doesn't quite give the same gloss.
@torrid944 ай бұрын
Mine lasts 10 mths with washing the car twice a month. At the 11th and 12th mth there is still beading but considerably lesser. Probably being in a hot & humid climate helps.
@APASSIONFORDETAILING4 ай бұрын
That's great results 👍🏽
@azman2040 Жыл бұрын
That half a turn was the greatest advice!
@APASSIONFORDETAILING Жыл бұрын
I can't work out if your being sarcastic or not 😅🤣
@rudykoster8784 Жыл бұрын
@@APASSIONFORDETAILING No it’s not! Really usefull because overapplying is a bitch with Fusso😂
@JS-bf9dw Жыл бұрын
This is the best "how to" for Fusso I´ve seen so far! Thank you very much! Subscribed!
@APASSIONFORDETAILING Жыл бұрын
Js I'm glad you enjoyed buddy I hope you enjoy my other content
@riniel12 жыл бұрын
Tip for warm climates like here in the Philippines, right after the application on the panel, wipe it off after a minute or two to avoid haze or high spots.
@APASSIONFORDETAILING2 жыл бұрын
I agree there dude
@matiusteddyc.856 Жыл бұрын
Will it affect the durability?
@riniel1 Жыл бұрын
@@matiusteddyc.856 Yes, if you're in a tropical and humid country.
@thomashansen387510 ай бұрын
I am a totally Fan from Soft 99 Products, The Fusso Coat ist my all time Favoriten, The Paste wax layer and also The F7
@ALai-wl5kj10 ай бұрын
Applied soft99 fusso on my black car. Unfortunately after 1 week or so, hazing/clouding appear and stained the paintwork after parked under sunlight. Any idea how to remove the hazing?
@davidcheshire107410 ай бұрын
Thank you, borrowed this wax to try and never looked back best wax ive used and used maannyyy.. the cheaper ones are false economy well worth the money
@thefreshprinceofgreenhills8 ай бұрын
Damn mate didnt know you had these type of vids, just subbed to this channel almost a year now all i see is you detailing cars with no dialogues and all, you need to bring these back
@APASSIONFORDETAILING8 ай бұрын
Thanks for the advice you prefer this tyre of video then
@thefreshprinceofgreenhills8 ай бұрын
@@APASSIONFORDETAILING you can mix vids do both 👌🏾
@APASSIONFORDETAILING8 ай бұрын
@thefreshprinceofgreenhills I have some plans for next year so let's see what happens :)
@thefreshprinceofgreenhills8 ай бұрын
@@APASSIONFORDETAILING Lets go mate looking forward to it
@AlabamaTree Жыл бұрын
The finish looks stunning… can’t wait to try mine. You said to apply in circular motions. I just watched a video from the soft99 channel and they say to apply in cross hatch motion.
@APASSIONFORDETAILING Жыл бұрын
It's what ever you prefer I have always done circles I think that is what I like. Go check out my wash and wax video on the bmw I just posted looknat the results from fusso coat
@AlabamaTree Жыл бұрын
@@APASSIONFORDETAILING I’ll have a look 👍🏽 …..but I was thinking if the finish in the car in this video could be better (it’s already super stunning) by using the recommended cross hatch method then wow!
@APASSIONFORDETAILING Жыл бұрын
Detailing is about what you find easier, if crisscross is easier do that. There's no right or wrong way I just find that easyer to 1 get eveb thin layer of coverage and 2 on a light colour like white you know where you beeb as you mayb not see the wax if that makes sense
@AlabamaTree Жыл бұрын
@@APASSIONFORDETAILING yeah I get that and im glad I’ve seen your video that show the amazing results that can be achieved with the non text book method 👍🏽😎
@rillab751 Жыл бұрын
My favourite video so far
@APASSIONFORDETAILING Жыл бұрын
❤️🙏🏼 what was it you enjoyed most
@roboliver99802 ай бұрын
😂 deffo been chucking wax on far too thickly. Thanks for the info. One less workout to buff it off in future.
@ajitpatel9106 Жыл бұрын
I'm watching this video from London UK. Another absolutely fantastic video. More of these videos PLEASE.
@APASSIONFORDETAILING Жыл бұрын
Glad you enjoyed
@Geeky_detail_reviews2 жыл бұрын
Great review. I love this wax, I have this version also. Fantastic
@APASSIONFORDETAILING2 жыл бұрын
Thank you yeah it's very good on my 2nd tin never disappoints
@user-pz6dw3ot8j6 ай бұрын
If I apply Soft99 in Year 1, what do I do when re-applying the Soft99 in year 2? Do I have to remove the previous year's coating by polishing? Or do you simply wash the car, decontaminate and panel prep before putting the next application (Year 2) on top of the previous year's (Year 1). Presumably it will bond properly with the previous year's application.
@APASSIONFORDETAILING6 ай бұрын
No need to polish unless paint needs it just a good chem decon and you be fine
@user-pz6dw3ot8j6 ай бұрын
Many thanks. I live in Canada. I wrote to Fusso EU last week since their website and the video re Soft99 12 Month Wax does NOT include this information. I still have not heard from them. So it is very helpful to have your answer.@@APASSIONFORDETAILING
@ll11222 жыл бұрын
Amazing video and thank you for sharing 😎 Regards from FL
@APASSIONFORDETAILING2 жыл бұрын
Your welcome 🙏🏼 thank you for watching don't forget to share with freinds thats might like this wax
@Team_Fauda_Germany_4443 ай бұрын
Great video ! Subscribed. Unfortunatly i just used a polymer sealing yesterday. Can i put this wax on top of the current coating ? Thx
@APASSIONFORDETAILING3 ай бұрын
You can do best to a good decon wash then reapply this :) thanks for watching 👍🏽
@michaelrimell62177 ай бұрын
Want to give Fusso a go. You mentioned in the video that you’d explain what to do if you get the Fusso on plastics. Is this a major problem?
@APASSIONFORDETAILING7 ай бұрын
If you do just use some apc or panel wipe to remove it don't let it dry
@ang220210 ай бұрын
Appreciate the response to the first question. Do you know of any spray sealants for all exterior surfaces than can be used wet and has months of durability?? Thank you.
@APASSIONFORDETAILING10 ай бұрын
If you use somthing like a ceramic snow foam or ceramic quick detailer as a drying aid
@aryandevendra7297Ай бұрын
Hello Brother Great info about the application❤. I have some questions... 1. I somehow bought the old Fusso formula. And after damping the sponge 🧽 I squeezed most of the water😅 and started waxing, but as I was applying the wax, it started to leave some lumps. I wonder why? 2. And while buffing, it was easy though, but I guess I have buffed a lot with hands which resulted in unevenness 😢. So, I had to ask about "how to properly buff". I have applied wax as thin as you did. And this was my first application for the wax I bought. For the first question, "is the fusso coat expired (can it) or I didn't damp well". By the way, I'm from India 🇮🇳 Mumbai and it is Humid here (does it affect the application)
@APASSIONFORDETAILINGАй бұрын
Hsy brother I prefer the old fusso coat way better It will be dur to it being humid dude wash the car that should help if not maybe make sure sponge isn't too wet ?
@Uncle_Fester246 ай бұрын
Story of the baseball cap you are wearing? I'm from Detroit. Great video.
@APASSIONFORDETAILING6 ай бұрын
Not a story as such but I collect hats big raiders fan but I also have many others too. Freind of mine supply's hats here in uk there all proto types
@bekishaable3 ай бұрын
Great job and tutorial!Thank you. How many microfiber cloths are needed to wax one car? Are microfiber cloths reusable after usage, can i wash them and use them again?
@APASSIONFORDETAILING3 ай бұрын
4 or 5 thank you for watching :)
@bekishaable3 ай бұрын
@@APASSIONFORDETAILING Thank you for yor answer :) What about reusing used microfiber cloth after usage? Are they washable or they go to bin :D ?
@APASSIONFORDETAILING3 ай бұрын
@bekishaable no you just wash them, only if you use ceramic coating do they go in the bin
@alex_tricker2 жыл бұрын
It’s a great wax that’s for sure, value for money is class!
@APASSIONFORDETAILING2 жыл бұрын
Hay Alex yes a real power house, what's your favorite wax ?
@alex_tricker2 жыл бұрын
My favourite for ease of removal is autoglym uhd wax
@APASSIONFORDETAILING2 жыл бұрын
@@alex_tricker good choice, I was bad In my video it was baking hot outside and the soft99 still came off with ease
@gert-janvandenberg41562 жыл бұрын
Friend of mine loves this stuff, he tops it after every was with Soft99 Fukupika strong type.
@APASSIONFORDETAILING2 жыл бұрын
Thanks for the comment it really is amazing and the chemical resistance is crazy month n months of protection
@AK-gv6ciАй бұрын
Can it be used on windsheild?
@APASSIONFORDETAILINGАй бұрын
Great idea but no I wouldn't get glaco for that
@aaronbell8527 Жыл бұрын
Got to get some ov this
@littlejack84111 ай бұрын
Great video. Would have this over garage therapy cs3 and sigma V2
@APASSIONFORDETAILING11 ай бұрын
Completely different product this will last the longest and will easy stand 6 months plus Sigma insane gloss and slickness Cs is very good too but more of a sealant then wax. They all gave there place Fusso,Cs sigma in thar order for me
@littlejack84111 ай бұрын
Thanks for the reply. Just one more question if I use fusso coat. Could I use sigma v2 as a topper
@APASSIONFORDETAILING11 ай бұрын
@littlejack841 you shouldn't need to a quick detailer will be better
@miroslavstuler8142 ай бұрын
Hi guys.. i have been applying Fusso first time in my life and i was careful, but anyway i did one mistake... When i was waxing corners, unfortunately i passed through them, it dried and now are little white spots on plastic parts... Can you help me, please, how to deal with it?
@APASSIONFORDETAILING2 ай бұрын
A good clean with apc or panel wipe should get it off
@ang220210 ай бұрын
Can you apply this on glasss and exterior trim? Amazing video, thanks.
@APASSIONFORDETAILING10 ай бұрын
No don't put this on any non painted surfaces
@michalwarmbier41136 ай бұрын
No!!!!!
@littlejack84111 ай бұрын
Would you say this is still better than gyeon cancoat not sure witch to go for.
@APASSIONFORDETAILING11 ай бұрын
2 very different products, this is way easier to apply imo
@andyroberts94954 ай бұрын
ive used this product a few years now and its excellent, I find tho I don't have to leave it on for 8 minutes, it sets within seconds and if I leave it on longer, its a nightmare to get off?
@APASSIONFORDETAILING4 ай бұрын
Thanks for watching 👍🏽, if it's a nightmare to remove means it been applied to think less is more the thinnest layer is all you need
@pritynagar34782 жыл бұрын
I need a matt finish recommendations please 🙏
@APASSIONFORDETAILING2 жыл бұрын
You need a wax for matt finish :) gyeon matt detailer would be best
@songstorelax62162 жыл бұрын
How much curing time should I wait to apply poly seal on top of fusso?
@APASSIONFORDETAILING2 жыл бұрын
You dont need to apply anything on top of this it's strong enough
@haparts750 Жыл бұрын
I reccomend you to spray fusso wax sealant after 2-3 washes, protects the wax and gives shiny effect
@APASSIONFORDETAILING Жыл бұрын
Nice little tip there 👍🏽
@darrochfisher1622 Жыл бұрын
Just bought this - I’m new to detailing! Can I use it on the headlights, glass and rims?
@APASSIONFORDETAILING Жыл бұрын
It's designed for psint really but wheels would work inc head lights and glass
@shelbybg6694 Жыл бұрын
Is it okey if I use a towel to dry the car or I need an air blower? Also can I just reapply after 4-5 months or I should completely remove the old layer?
@APASSIONFORDETAILING Жыл бұрын
A drying towel will be fine a blower isn't really needed just a expensive accessory. Just re apply over the top will be fine you will get wat more then 4 months tho
@alexhs89911 ай бұрын
Why the short piled microfiber towel is scratched safe for the paint and the long pile microfiber towel could scratch the paint while you buff the soft99? The matter is the microfiber towel to be soft. According to my opinion.
@APASSIONFORDETAILING11 ай бұрын
I just prefer shorter pile for waxes
@DjNikGnashers7 ай бұрын
@@APASSIONFORDETAILING I find loop pile microfibre best for removing, and twist pile for a final buff.
@APASSIONFORDETAILING2 жыл бұрын
What a wax who else loves fusso coat ?
@gillywash14872 жыл бұрын
Legendary stuff
@APASSIONFORDETAILING2 жыл бұрын
@@gillywash1487 like a Knight in shining armour
@dickaldor Жыл бұрын
Great video! But if it´s not that glossy, is there a good quick way/product to get the gloss up after applying fusso?
@APASSIONFORDETAILING Жыл бұрын
A good quick detailer over the tip will work just fine
@callacrap Жыл бұрын
Should I polish the car before I apply this coating for optimal results?
@APASSIONFORDETAILING Жыл бұрын
Not necessary really as long as the paint is clean so a good decon wash and you will be fine
@callacrap Жыл бұрын
@@APASSIONFORDETAILING brilliant thanks so much for your reply!
@LKN4WAR Жыл бұрын
Could I top this with something like Extreme Solutions Poly Seal? Or could this top the poly seal? Additionally could this be applied with a ultra soft polish pad on a DA?
@APASSIONFORDETAILING Жыл бұрын
Imo you dont need to top this with anything you could use somthing every 4 or 5 washes. No by hand is perfect but you could if u wanted
@dino_mk753710 ай бұрын
Hey what do you think of kiwami wax?
@APASSIONFORDETAILING10 ай бұрын
Brilliant wax just not at durable but still brilliant
@dino_mk753710 ай бұрын
@@APASSIONFORDETAILINGthank you for your answer.... Can i redo the waxing since im not very happy and satisfied with how i've done it a week ago? Or should i maybe let it some time?
@APASSIONFORDETAILING10 ай бұрын
@dino_mk7537 when you say not happy what do you mean? Wax is wax dude ?
@dino_mk753710 ай бұрын
@@APASSIONFORDETAILING ye but i kinda put a very thick layer on it so it was harder for me to wipe it off afterwards...
@APASSIONFORDETAILING10 ай бұрын
@@dino_mk7537 give tye car a wash see what its like after that use a detailer as drying aid think everything will be fine
@ronaldmogorosi13659 ай бұрын
Can I protect it with true ceramic coating
@APASSIONFORDETAILING9 ай бұрын
You can't put a ceramic on top if this it won't bond
@petreticu6008 Жыл бұрын
If I got fusso 99 and it says for darker colors, is it ok for all paints, or does it work only on dark paints?
@APASSIONFORDETAILING Жыл бұрын
Nah will be fine on any colour :)
@choonyautan8317 Жыл бұрын
Hi, do you know celestite grey metallic colour Is dark or light color. Some say light some say dark, or both also can use. Thank
@APASSIONFORDETAILING Жыл бұрын
You can use either if u have a grey car go for the dark 1
@littlejack8412 жыл бұрын
Nice vid. I’m looking to use a wax or garage therapy THREE: cs Ceramic Sealant top up with Sigma V2. Would you say the soft99 is better?
@APASSIONFORDETAILING2 жыл бұрын
Hard choice sigmav2 will give you way more gloss and slickness but wint last as long. Soft99 is so durable but not as glossy or as slick
@ianmcfarlane2488 Жыл бұрын
Hi, would you use this after every wash?
@APASSIONFORDETAILING Жыл бұрын
No not at all you will see months and months of protection, you might want to use a detail spray as a topper to help dry but that's all
@458steve43 ай бұрын
Do you recommend prepping the panels 1st? Stage one/two polish?
@APASSIONFORDETAILING3 ай бұрын
It's a wax it's not that important imo
@458steve43 ай бұрын
@@APASSIONFORDETAILING Thanks buddy.
@APASSIONFORDETAILING3 ай бұрын
@@458steve4 well dude :)
@458steve43 ай бұрын
@@APASSIONFORDETAILING just ordered some. lets see how it goes :)
@justinsteel6360 Жыл бұрын
Apply cross hatch not circular
@APASSIONFORDETAILING Жыл бұрын
Literally makes no difference my freind
@kaizoku6272 Жыл бұрын
how do you wash the applicator/sponge after using it? and can it really be used on tyre rims as well?
@APASSIONFORDETAILING Жыл бұрын
A little apc with remove it from sponge while it's wet, you can but isn't really designed for wheels buy you will get some protection from it
@kaizoku6272 Жыл бұрын
@@APASSIONFORDETAILING ok thanks
@stavracheandrei9580 Жыл бұрын
Hi! Why after application it remain? I have try all the methods and not only on black car but same on different car model. I have try damp sponge with thin layer, dry with thin layer! it's make me crazy! I had to polish again and again to remove the haze left behind. I succeded on one part of the car but don't ask how because I don't know how, finally I gave up! I let wax to stay also different minutes but same, haze appears... Can you give me any tip? please
@APASSIONFORDETAILING Жыл бұрын
Hi dude you shouldn't get any haze at all I havnt had any issues I assume your using a clean dry towel? Have you tried removing it then with a damp towel go over ?
@totallyrandomstuffandrevie9609 Жыл бұрын
If you get hazing remove the wax immediately after immediately after applying it to small area. Do not allow it to dry and your problem will go away.
@anajo240 Жыл бұрын
Do you need to clay a car before putting the wax on? I just don’t have all the detailing tools to do that. Thank you so much. This is very helpful
@APASSIONFORDETAILING Жыл бұрын
Ana you dont need to clay no. Clay leaves mirror scratches that need machine polishing afterwards. Try chemical decon with an iron remover before whole you wash
@n00blike10 ай бұрын
how many layers can you do?
@APASSIONFORDETAILING10 ай бұрын
As many as you want but 1 is all you need
@tyreesecamp807 Жыл бұрын
Sup Mate I'm from South Africa where can I get thus product please bro 🙏
@APASSIONFORDETAILING Жыл бұрын
Soft99 website if not ebay and eveb amazon
@Anna-yp6bk2 жыл бұрын
Hello, can it be also used for the plastic parts and headlights? Many thanks for your advise.
@APASSIONFORDETAILING2 жыл бұрын
Hi Anna no don't apply on any black plastic it will stain it if it's your conventional plastic that you would normally put a dressing on. On other hand it is OK to use on plastic lights or piano black trim
@Anna-yp6bk2 жыл бұрын
@@APASSIONFORDETAILING thank you! :)
@APASSIONFORDETAILING2 жыл бұрын
Your welcome 🙏🏼
@DerickHo Жыл бұрын
after watched your video, im going to wax my new car for the first time, is there anything to pay attention to?
@APASSIONFORDETAILING Жыл бұрын
Well I'm glad I had an impact, little tip a very very thin layer of wax is all you need less is more if you can see thick bits there's to much on the paint. Do two panels at a time not the whole car at once
@DerickHo Жыл бұрын
@@APASSIONFORDETAILING got it! but i dont have the experience in decontamination, does it necessary? since my car is new and havent apply any coating on it
@APASSIONFORDETAILING Жыл бұрын
@Derick Ho best thing about a wax is you can apply it when ever where ever so steps really needed as long as paint is clean and free from dirty you be fine
@DerickHo Жыл бұрын
@A Passion For Detailing then i will buy a Ph neutral car wash shampoo to wash it before applying the wax. Thank you for your advice 😀
@DerickHo Жыл бұрын
@@APASSIONFORDETAILING i saw there is another product 'Fusso coat F7' is it the same? how to choose between this 2?
@SD-ym5jo Жыл бұрын
Quick question, can it be applied after using Autoglym Super Resin Polish or should it be applied alone? I wish to test out both products, but not sure if it will work well or not. Great video btw 👍
@APASSIONFORDETAILING Жыл бұрын
Yes you can do this but I wouldnt recommend it as you won't get the durabilty from it as it won't bond as well to the surface. But if that don't bother you then sure can be done
@SD-ym5jo Жыл бұрын
@@APASSIONFORDETAILING Ok, thank you 😁👍
@APASSIONFORDETAILING Жыл бұрын
@SD88 your welcome little tip use a good shampoo with no protection in and panel wipe once dry, then apply this very very thin almost so you can't see it you will thank me later :)
@SD-ym5jo Жыл бұрын
@@APASSIONFORDETAILING I have some Bilt hamber touchless and suds heaven from turismo, witch would be best? So I should use carpro eraser or something like that before I use Fusso coat? But that would also remove all of the Autoglym SRP, witch is more of a glaze (filler) then a polish. I should then probably just drop the SRP and just stick to Fusso coat...so hard to chose :) I have heard so much good stuff about SRP, thats why I wanted to test it, but that alone isnt much protection on the paint.
@APASSIONFORDETAILING Жыл бұрын
@SD88 touch less as your pre wash. I don't no much about the suds one your talking about is there any protection in it ? If so just go BH, yess somthing like that or garage therapy panel wipe. Fusso has filler in to so you should be good SRP is minor polish really if you look at it like that
@rafaelperrella17612 жыл бұрын
Nice. Im from Brazil and i have this wax too.
@APASSIONFORDETAILING2 жыл бұрын
Hello Rafael it's very good isn't it. What do you like best about it
@rafaelperrella17612 жыл бұрын
@@APASSIONFORDETAILING For sure protection and water repellency.
@jezlucas3878 Жыл бұрын
Can you apply it if already got some protection on ?
@APASSIONFORDETAILING Жыл бұрын
To get best results decon was your paint to remove old waxes and sealants
@jezlucas3878 Жыл бұрын
@@APASSIONFORDETAILING Cheers for the channel , much appreciated
@peterclifton6312 Жыл бұрын
May sound like a silly question but do you need to have a damp sponge or dry
@APASSIONFORDETAILING Жыл бұрын
No not a silly question at all I prefer a dry sponge you can damp it I found it wouldn't spread thinly when making it damp
@peterclifton6312 Жыл бұрын
@@APASSIONFORDETAILING thanks for the reply
@APASSIONFORDETAILING Жыл бұрын
Anytime Peter:)
@rockago55 Жыл бұрын
ive got one and its really good but can any one tell me if this product has an expiry date ,,? cause i dont see any on the cap
@APASSIONFORDETAILING Жыл бұрын
It shouldn't do dude had mine years
@rockago55 Жыл бұрын
@@APASSIONFORDETAILING thanks cause i have a new car and i keep it garaged and i do the application once a year
@APASSIONFORDETAILING Жыл бұрын
@drago how long have you had it ? I'm sure even if they wax is a few years old will be fine
@rockago55 Жыл бұрын
@@APASSIONFORDETAILING i bought it 2 years ago
@APASSIONFORDETAILING Жыл бұрын
@drago will be fine dude, might have lost abit of its performance but dought it very much
@hp-je1cy2 жыл бұрын
Would you recommend this over the Caramics from Auto Finesse Ceramic Coating (which lasts 12 months)? Thanks
@APASSIONFORDETAILING2 жыл бұрын
Yes I would whats great is its no fuss and much better value for money
@hp-je1cy2 жыл бұрын
@@APASSIONFORDETAILING thank you very much
@APASSIONFORDETAILING2 жыл бұрын
@@hp-je1cy your welcome and let me know how you get on with it I think you will be very happy
@hp-je1cy Жыл бұрын
@@APASSIONFORDETAILINGhi can I please ask if it's a good idea to use this without a garage (I've read there is a 12 hour cure time so thinking what if there was some condensation on the car by the morning)? Thanks
@APASSIONFORDETAILING Жыл бұрын
@3945hp there's no need to worry buddy I don't have a garage and I would be happy to apply outside, if it rains say just after you apply you won't have any issues, it's a wax not a ceramic coating. If it only lasts 3 months you just apply it again
@thomashansen387510 ай бұрын
Hey You, easy to apply ? This is the best paste wax of course,but not easy to apply. Less Wax is better than too much.
@APASSIONFORDETAILING10 ай бұрын
Less is more if its thin enough its easy to get off but thin is key
@M2GChannel Жыл бұрын
Is this work with plastic vender on car??
@APASSIONFORDETAILING Жыл бұрын
If there black plastic trim no thos won't work if there painted yes it will
@M2GChannel Жыл бұрын
@@APASSIONFORDETAILING thanks fyi 🙏🏼🥳
@alvin3502 Жыл бұрын
No need for 12hours of cure time?
@APASSIONFORDETAILING Жыл бұрын
Nope non needed at all
@SUPERSID19682 жыл бұрын
You can't get the old fusso coat anywhere or can you ? Should of done review of new fusso coat I've heard the new fusso coat don't last as long ? 🤔
@APASSIONFORDETAILING2 жыл бұрын
I have used both and there's noting in it imo the old one you can get on ebay look out for the sane coloured yellow black in pictures last one I got was early this year from russia
@Back2running2 жыл бұрын
Just bought some , let see what it’s like 🙄
@APASSIONFORDETAILING2 жыл бұрын
Road runner you are not going to be disappointed what so ever let me no how you get on. Remember dude less is more
@ningnyco1782 Жыл бұрын
You apply paste type of wax just like lquid type? You didnt even rubbing at all
@APASSIONFORDETAILING Жыл бұрын
Yes the same the best advice is keep your wax really thin
@jamesrichardson46045 ай бұрын
It's not actually a wax it's a sealant
@jamesrichardson46045 ай бұрын
Just bought some for my black MK4 golf GTi daily and show car . Going to put some kawami wax on top after 12 hours for more gloss . Looking forward to seeing how it performs . Enjoyed your video
@APASSIONFORDETAILING5 ай бұрын
@jamesrichardson4604 ahhh nice tbh just use thos I think it will be over kill you will still get a nice enough gloss with thos thanks for watching
@JayjayjoeАй бұрын
Kinda dissapointed with it. Get a "spotty/flamy" result which I have never got with other waxes. Now I need to do remove it... crap.
@APASSIONFORDETAILINGАй бұрын
@Jayjayjoe very suprised you havnt enjoyed it when u say spotty like when your taking it off ? If so means 2 much and your paint is contaminated
@JayjayjoeАй бұрын
@@APASSIONFORDETAILING I did clay it and polish it before and cleaned the polish away with 40% IPA. Is there still polish remains left?
@APASSIONFORDETAILINGАй бұрын
@Jayjayjoe maybe it was applied to thick iv seen that before was it hard to buff off ?
@JayjayjoeАй бұрын
@@APASSIONFORDETAILING Yes, it was also very hard to apply.
@APASSIONFORDETAILINGАй бұрын
@Jayjayjoe defo to thick then you only need the thin layer almost so you can't see it so will be why
@Niddlepiss4 ай бұрын
What soap would you recommend for maintaining the fusso coat, but doesn't strip? Will their creamy shampoo be good?