In this video, I show you how to replace a drive friction disk on an Ariens Pro 26 snow blower. This process will be very similar no matter what type of snow blower you have. Thanks for watching! Please LIKE and SUBSCRIBE!
Пікірлер: 10
@johngreene77905 жыл бұрын
This was very helpful to me because I also could not pull the bearing assembly on the right side. That means I can't move the disk drive shaft enough to pull the drive disk. I figured I was going to have to give up and take the machine to the dealer. What I learned from you is how to work around that problem. I'll give it another shot. Thank you.
@michelgougeon6 жыл бұрын
Thank-you for sharing your time for us.
@papabits57214 жыл бұрын
A whole lot easier to remove the wheels, and add anti seize to the wheel drive shafts so they don’t weld themselves to wheels.
@qd18335 жыл бұрын
Thanks for the video! One question. What's wrong with the friction wheel on the machine? It looks like there is still has enough rubber for 2 years。
@mikehahn14865 жыл бұрын
Great video
@craftsmancrusher2075 жыл бұрын
Can you make more murray modding and riding mower with ferlessfront or just on your property
@nagazinafireworks75945 жыл бұрын
I dont think I have what you have but only my left wheel drives and not my right,so what do you think that might be? its very hard to push in the snow... I have the 11528 Ariens.Thanks
@RickLangevin5 жыл бұрын
When standing behind the machine you will notice the right axel is slightly longer. There are 2 sets of holes for the pin that holds the wheel on. Change which hole the pin is in.
@nagazinafireworks75945 жыл бұрын
@@RickLangevin That was it thanks so much it works great now...