Hello! Thanks for reaching out. Our Built-In Screen/Golf Room Kits are in pre-launch. Check out the details at shop.carlofet.com/built-in-golf-room-kit and hit us up for a quote if you're interested.

Hey Eddie! The cable goes through a sleeve on the bottom of the screen, which keeps it tight to the floor. This is to provide that seamless turf to screen visual while keeping worm-burners from sneaking under! The cable is sized so that it is taut enough that the bottom of the screen stays flush with the floor. Hope that makes sense.

@@carlsplace Definitely does. Thanks for the reply!

Hi George, thank you for reaching out! The corner anchors for our Built-In Screen system can be mounted on walls finished with drywall, but It's important to make sure that they are secured into the top/bottom plate or a stud within your wall. Since it may be difficult to align each anchor exactly on a stud our anchors have been designed with a slight angle to help the lag screws reach the top or bottom plate of most traditional wood framed walls. An example of this install can be seen in the video starting around 1:40. If you have more questions, reach out to our expert customer service team here: www.carlofet.com/contact

Thank you for reaching out! Our Built-In Hardware Kit and included fasteners have only been tested for use with wood framing. It's possible that the anchors could work with other materials if you have a way to securely fasten them to the wall but we haven't tested that option directly so we're unsure of any additional considerations you may need to make to ensure the success of that mounting method long term.

Hey! This screen, from outside edge to outside edge, was about 117" tall by 184" wide.

Hi Keith! Thanks for reaching out. Our Built-In Screen/Golf Room Kits are in pre-launch. Check out the details at shop.carlofet.com/built-in-golf-room-kit and hit us up for a quote if you're interested.