How to Assemble Your Wire Shelving

Рет қаралды 46,909

4 жыл бұрын

Need help assembling your wire shelving unit? Shelving Inc. has you covered! Watch this step-by-step tutorial and learn just how easy assembly can be.
The best part? You won’t need any tools!
For shelving units 64” or longer in length, your posts will come in two pieces. To watch how to assemble this type of shelving, click here:
Learn more about the types of wire shelving we offer and the countless ways they can be used here: bit.ly/2Vsxvzu
If you have any questions, feel free to leave a comment or reach out to us by emailing info@shelving.com or calling (248) 852-8600.

Пікірлер: 25

@1456Sassy 2 жыл бұрын

I'm putting some together today. Had to come look to see which way the shelf is suppose to sit. Thanks, I see I got it right!

@BigFarm_ah365 4 ай бұрын

I have a set of the large casters, not the threaded ones. How do I remove the threaded insert that the leveling feet go into?

@michaelwhite5021 Жыл бұрын

I had no problems assembling the unit except for the "#5" instruction for installing the washer/anchor/screw assemblies ..the diagram seems to show the screw going through the wire side of the shelf but I can't see how that would giver anything to screw it into ..?

@ShelvingIncorporated 10 ай бұрын

We would be happy to help! Can you please elaborate on what you mean by washer/anchor/screw?

@jacshe3291 3 ай бұрын

Can this shelf be double stacked with another shelf like this?

@lorette2443 7 ай бұрын

My shelf is wobbling like a cradle, and all the shelfs just sit over the clips, even after all the pressing and pushing they don't go over the clips as shown in the pictures. Can I replace the clips with something else? Please help 🙏

@veeblack5739 2 жыл бұрын

Clips are not closing simply, I hit the frustrated level.

@ShelvingIncorporated 2 жыл бұрын

Thanks for reaching out. The shelf clips will NOT close completely - they should have a space between the two halves to allow for compression when the shelf is placed atop them. That said, be sure that the clips are resting IN one of the grooves on the post (slide the clip up and down the post until you feel it snap into place on the groove). If they are not, they will slide off when the shelf is set on them. Please let us know if you still need assistance.

@veeblack5739 2 жыл бұрын

@@ShelvingIncorporated I figured it out. I was putting the shelves on backwards. Sometimes you have to take a break and just watch you tube for the answers!😂

@debbiestover416 2 жыл бұрын

Thank you miss Black, I had the same issue but now I understand how they work.

@AyaInanna Жыл бұрын

Omg this was my same issue. I'm going to try it again when I go back to my office tomorrow 😩

@veeblack5739 Жыл бұрын

I am a pro at assembling these shelves now😂😂😂. I have put up three more shelves since this initial post was made.

@rickmaw8655 Жыл бұрын

The shelves will not slide over the plastic clips, the clips do not even slide into the shelves without the tube inside. Watched the video and they made it look like it slides on so easily. Is it possible we got parts that are the wrong size?

@ShelvingIncorporated 10 ай бұрын

Please make sure that the clips are resting IN one of the notches/grooves on the post (slide the clip up and down the post until you feel it snap into place on the groove). If they are not, the shelf will not fit over the shelf clips.

@herminehyatt42 11 ай бұрын

I am putting a unit together I want to know if all the clips are the same sizes.

@ShelvingIncorporated 10 ай бұрын

Our wire shelving posts have a 1" diameter and use these shelf clips: www.shelving.com/1-Diameter-Shelf-Clips-4-Pack-p/si-apsc.htm. However, we also offer 3/4" diameter shelf clips for customers who have existing 3/4" posts.

@donsides1776 8 ай бұрын

The assembly is ridiculous. If I ever get another one it will have to be assembled at the store,. I have spent an hour on three separate nights this week and still don't even have the bottom shelf on correct. I get one part right and then another part slips off. If a try a tool, I try will be a sledge hammer.