The Peak 44 Blacktooth stock is the lighter carbon fiber stock on the market at just 20 oz. Upgrade any rifle set up at home with this video explaining how to bed a rifle in our Blacktooth stock from start to finish.
-Remove old stock
-Apply release agent/wax to underneath front of barrel, recoil lug, behind the recoil lug, sides of action, front action screw, and underneath the front of the floor plate assembly
-Mix two-part epoxy in equal amounts. Jar included is enough to bed multiple rifles.
-Apply bedding compound to inside of stock directly into the recoil lug area and forward and aft of the recoil lug area. Try to avoid applying bedding compound into action screw hole.
-Place a Q Tip into action screw hole on barreled action. Place stock onto barreled action ensuring alignment using the Q Tip. Ensure barrel is centered in barrel channel.
-Remove excess bedding compound that may have overflowed from beneath the action using paper towels with mild cleaning agent
-Remove Q Tip and excess bedding compound from action screw hole
-Place bottom metal on stock
-Screw in action screws using minimal force
-Let stock sit for 24 hours
-Remove bedded stock from action
-Clean off wax from barreled action
-Apply a light coat of oil
-Use a small file to remove any bedding compound from the action screw hole and magazine box
-Place stock onto barreled action and torque action screws to factory specifications