My wife has been wanting an archway for her hanging plants. This is brilliant appears to be fairly simple. Thank you for the share

Very good video! So informative, and you are great explaining the whole thing. You make it seem easy as it should be! Bravo!!! Cheers from Italy

Thanks. A video is worth millions of words. Well done.

Direct and to the point! Thanks!

Outstanding. At 4:50 using 1 5/8 fence post into the ground to add height AND secure hoop to the earth...I was coming to the same conclusion. You just saved me some trial and error. Thanks!

Great video with links to where we can help ourselves! Much appreciated. Well done!

Excellent video. Thanks. That's exactly what I needed

Great work sir. You both are genius

Thanks for this sharing, it helps to build a greenhouse at lower budget.

Excellent basic information - thank you so much.

Perfect! Thank you.

thanks for sharing

Thanks for sharing your knowledge, much appreciated.

Very informative. thank you for sharing your experience

Great idea.

Thank you for sharing your knowledge! I am so very grateful! I have subscribed.

Great video thanks for posting it just the kind of information I was looking for. Im going to go with galvanized pipe instead of pvc.

Thanks guys!

This is a gr8 video. Job well done. Well worth its weight in gold, man! Thanks for posting.

Thanks for sharing I love your video. Thanks

Thanks for the great video, Should use this bender for a 24 foot greenhouse and make my bend at 6 inches. Thank you 🙏 in advance

Thanks for the explanation!!

Very well done video, thanks.

looks so easy

I'm interested in the triple weave as well!

Still the best how to video!

Thanks 🙏

you make it look easy

Way cheaper than buying a greenhouse kit. Thanks for the post. If you build a greenhouse the polycarbonate corrugated panels are way too expensive but layered clear plastic is significantly more affordable.

thanks so much!!!! your videos are great.. and the links and info will be very helpful. I appreciate you and your help.

Very good idea! My brother and I are thinking of getting property in Texas and this is the best idea yet!

Thanks for showing us how to bend the pipes for the green house

Thank you. This was great!!

THank you young fellas, nice ideas, can do much things with it✌

You are great 👍

Thanks y'all!

If you happen to live in an area that gets a significant snowfall in winter, I suggest doing what I did. It WORKS GREAT. I used 50" x 16' Cattle Panel and covered that top of the frame with THAT, then put on the plastic. We had 2 different snow DUMPS of 3 feet up here in Montana, and the plastic held up perfectly. If you live in an area that does NOT get too much snow, then you probably don't need to add the cattle panels, but it SAVED my 8 x 12 hoophouse from the same fate as many up here faced...........total collapse of their plastic covers. It also gives you TONS of places to hang plants, tools, and other items to keep your bench space clear.

Very good idea ! Thank you from Russia !

Excellent video Thank you!

Hey I was wondering if you think the green house will still be sturdy if I add a center 6’ of straight to give me a 18’ wide green house ? I can’t go up to a 20’ arch because I have a height issue. Thank you

Wow great Job guy's just what I needed save me thousands of Dollars and time.

Thanks for the good information!

Thanks, I’m interested in making an arch cabin. I think this might work. We’ll see.

I would like to build a 12 w 20 L 8 H greenhouse you showed in video , do you know of any pre made covers for this type of greenhouse?

I love your video. Thanks for sharing. I live in GA and will have to find a source for the pipes. What would a 12x16 cost and how is the plastic attached to the frame.

Awesome info. Thanks

thanx for the idea

great job very informative Thanks

Great Idea

Nice

Great video!

nice

Great and Thanks alot

Dang that's clever!

Very good video...thank you so much

Very nice simple video

What is the length of pipe do you need if you want to make a hoop house for 30 ft width x 100 ft long x 12 feet high?

Awesome Video!!!!!

Thanks for the video! What spacing do you like to use for the ribs? I'm up in WI so they may need to be closer together for the snow load.

Where can I get that pipe bender

How was the first one made?

How do you make the bender???

Very nice

Thanks for that great info question about the plastic cover you sell them ?

Excellent technical information! Give some more information on pipe size like pipe length to get hoops of 12 ft,24 ft and so on and more close up views!!! Great information!!!

learn something new. Thanks

How much do you sell the weave for?

Have you bent the bender yourselves, if so how did you do it?

Suppose I want to do 16'wide. Can I just add a 6' piece of the 2 3/8" post between the two 12' diameter halves? Or, if I decide to just use taller 2 3/8" posts for the 16' bend, what is the difference when using the bender to bend 6' arcs vs 8' arcs?

I purchased one of your large pipe benders. You stated in this video that it will bend up to 24'. How do you do this as this...24'.... is what I need? Thanks.

Thanks for sharing your knowledge and skills. Where can i buy the pipe bender?

Here in New Zealand I can buy 21" length pipes. Would it be better to just bend one pipe like this or buy them in 10-foot lengths and join two at a time?

Hello. did you use galvanized steel? If yes, do you think I can use ordinary pipes i.e non-galvanized

Do i need to make a 6 inch mark if i want to use three poles per rib or do you recommend another measurement?

what gauge galvanized top rail are you using and what gauge purline thanks Kappy

Where do you buy your fence pipe/tubing and how much is it? Home Depot is too proud of their stuff for me, I need to check some of the other places around town and see what they've got and their price. Thanks man

Well wonderful but you have not explained how the jig to be made and what arc tone

Where buy these pipe which they can tapper in. Thanks

I want to build one of these on top of my dump trailer for leaf cleanups. The width is 83 inches I’d like to get the height to about 6 or 7 ft. Then cover the arc with a mesh tarp. The metal arc would attach to a wood base of 2 ft by 12 by 16 ft Any ideas on how I would do this would help.

Unable to follow link to pipe bender.

Do you buy or make the bender forms? Thanks....

Can you state the dimensions and the steel ,thickness, diameter etc

How many feet from the bottom of the Pole are at end to end using the 12' Poles

Good job with the video. Where could I order a bender?

Where did you guys get the metal pipe in bulk please

hi! how long is one piece of those pipes you just bent? thank u

Where can I buy one of the pipe benders shown?

I tried to avoid the cost of the bender, but I eventually broke down and bought one. I tried the bender in the Lowes store. I took that back. I bought the low tunnel bender from Johnny's. i still don't know how much EMT to stick thru the bender and then start to bend? I bent some last year and this is my second year having my tunnel up. I found with the 6 mil plastic and the winter I never got out there to water, end result I lost my plants. I used (15) and (19) wt. Agribon, but they ripped. I recently got Xavan 15' X 50' which is a Dupont product. I can see in the box that it is A LOT stronger than the Agribon. I will try it in the spring bc it is too cold up north. My Agribon (19) has a hole in the top of unknown origin? Perhaps I pulled the Agribon too tightly? I had to clamp (2) Agribon sheets together to cover the width bc I bought 83". My low tunnel is 79" across so that is why I have to put (2) sheets together. I got a Jang seeder so now I can seed as much as I want to and make patterns. I am looking forward to using the seeder. The down side, as I can see so far, is that I can not plant flower seeds with the Jang, but I'm sure i'll figure it out. That guy is smart to have you bend the pipe bc just getting to the realization and acceptance that you need a bender to accomplish a greenhouse can take days of frustration like I spent.

Where do you buy the woven plastic? How much is it?

I would weld it instead of screws but i love rest of it.

A Simple way to Avoiding Twisting the Pipe as you Bend it is to use a Black Marker or Crayon. Lay the Pipe Flat, and Run the Marker down the Top of the pipe, from one end to the other. Now turn the pipe, and place the Line in the Center-line of your Bender Tool. When Bending and Repositioning the pipe, Keep the Line in the Center-line of the bending tool. This will Keep the Pipe from being Twisted as you Bend. t also helps to Align when Assembling the Pipes for the Arch. 30 Seconds extra time, which will save you $$'s and Headaches. And possibly a Few Bad Words.

I think you could put metal on that and make your carport

So it takes 2 12 foot pipes to make a 12 foot wide greenhouse?

👍👍👍👍👍👍

How many sections of fence for the 16ft?

Let me add......I used FOUR cattle panels to cover the whole structure of my 8 x 12 hoophouse. Just wanted to make that clear so no confusion.

What part of Texas are you in?

What is the angle around?

👍👍👍👍👍

Would have likedto seethe bending device up close