Just tried this and it worked great! Left the skull to sit for 3 days after applying the bleach/bleach powder mixture. It whitened up the skull significantly! After a little bit of cleaning the skull looks fantastic! I would recommend this technique to anyone who’s wanting a nice white Euro mount!
@olivialynn68062 жыл бұрын
When bleaching hair with this same mixture, you are in fact supposed to wrap the hair in foil or plastic wrap. Yes, it otherwise would dry and clump, but the bleaching process also stops working as it dries. The chemical reaction between the peroxide and ammonia releases heat, and by trapping the heat, it keeps the bleaching process going. I already have this stuff at home, so it’s cool that I can use it on skulls too!
@mikeburke86562 жыл бұрын
This method works really well -- the bleach powder is expensive so I got a 1 oz. pack for ~$4.50. Thought I would save what was left in the jar to use later, but it expanded and bubbled out of the pack. The skull is really whiting up and less mess than boiling. Highly recommend. By the way, going to get the bulk bleach at ~$15 or so.
@waynehullihen3066 Жыл бұрын
I’m rewatching this video to refresh my memory from 2020. My son and I both got nice bucks then and I used your process on both of them and it turned out very nice. I got a nice buck this week and I’m going to do it again. Thanks for the demonstration.
@pachoulzy3 жыл бұрын
hey! thanks for this, i’d been looking for a way to lighten an old, mossy bear skull that’s pretty weather damaged. i used 20 volume developer and it worked perfectly. thanks again!
@ratking23464 жыл бұрын
Thank you. A mount with antlers attached(I don’t hunt) this helped!!
@ratking23464 жыл бұрын
(I found a mount)
@jimiandersonblackknight75542 жыл бұрын
Great video thank you for posting it! A little bit of help from the peanut gallery, when you were talking about how thick you want it after adding the powder. I would describe it in a term that’s used in baking, and or dessert making by pastry chefs, when you lifted that butter knife out with the way that it covered the entire knife and came down in a sheet that is called curtaining . If it stays stuck to the knife and then drips off the end that’s called roping, and as usually thinner probably what you started out with would rope instead of curtain if that makes any sense to you. I worked in some fancy restaurants when I was young and had to learn all those terms and ways of talking paid off when I got in the body work lol.
@VictorGarcia-jh6iq26 күн бұрын
Good job 👍
@raygulaskey84433 жыл бұрын
Good job. I was looking for a way to bleach the skull without having to boil it again after the Oxy Clean. I like the Mop n Glow idea too.
@nytronasty1381 Жыл бұрын
Just ordered those two bleachers! Thanks will try it lot cheaper than that powder cabelas sells
@slvice142 жыл бұрын
Dude! This is great, thanks for posting this! I'm gonna do this with a pig skull that I have. Thanks again!
@AA-fg3wj3 жыл бұрын
Thanks for the advice! I would like to see how your hanger is made also.
@marcusramos79183 жыл бұрын
Can you do a video on the mount you made ?
@chrisvasey712 жыл бұрын
So it looks like you pull everything out of the nasal cavity after boiling. Does it come out pretty easy? I actually think it looks better when finished that way. Also, do you remove the ear buds?
@huntinginaust.64634 ай бұрын
What did you say the final product was for the gloss look? Thanks!
@lbuch40 Жыл бұрын
Very educational! Does temperature matter while waiting for the cream to do its job? Say 40 degrees vs 60 degrees? I would guess maybe in colder temps it would just take longer??
@mikegarza80002 жыл бұрын
Awesome video! Very detailed, thank you👍
@malarie11 Жыл бұрын
I'M in the process of whitening my deer skull, I did not have the white powder on hand for 1st whitening part. Can I buy thew basic whie powder and use it for the 2nd part (and maybe 3rd??) Thanks forthe excellent video
@ericcipriani7155 Жыл бұрын
Excellent video dude
@erikmartin69183 жыл бұрын
My wife would kill me if I did that on a nice table. Good job not spilling. You're much less clumsy than me
@MCBCHC274 жыл бұрын
What mounting bracket do you recommend?
@davidunrau4234Ай бұрын
Please post a video or contact information for purchase of your skull wall mounting bracket. I tried to email you, but it bounced back?
@tylerreed4423 жыл бұрын
I’d like to know how you make the hangers
@darkhillseuropeanmountsLLC11 ай бұрын
Well done
@xiaolicui91332 жыл бұрын
Hi the last step what kind of coat you put in on, I did not catch you. Thanks
@rickg.5454 Жыл бұрын
Nice job! Thanks
@VincentMolina86 Жыл бұрын
Great video, I used your method. But why not use an oil based flat primer spray can? It’ll be white and won’t let the oils through. I guess what I’m saying why don’t people use spray paint?
@CR-nv7vj7 ай бұрын
Painting it really makes it look more fabricated and less natural. It covers up to very fine lines and cracks that skulls have. But if that's the look some people are going for, that's their preference. Most prefer a more natural one.
@vincecas73 жыл бұрын
I do mine the exact same process
@emilyisdead98102 жыл бұрын
Is there any visible damage when using cream peroxide?
@miltonaliff33163 жыл бұрын
I saw one guy doing it without any whitener, just painted the whole thing white, said it kept everything together
@escubasteve3 жыл бұрын
Great video Man!
@sasquatchboogieoutdoors92672 жыл бұрын
Great job!
@buckmccoy51023 жыл бұрын
Please show me the mounting hangar.
@boshlupercalia90213 жыл бұрын
What’s the mop and glow is it the floor polish mop and glow
@ikeyeet83122 жыл бұрын
exactly how i do mine.
@thomasbrown28012 жыл бұрын
Could I use the basic white with 3% proxcide??
@JDoug27832 жыл бұрын
Any idea why mine got darker? Used the exact products and did the same thing and mine are almost black?? Only difference is I had to use Salon Care 50 instead of 40 because that’s all they had??
@nicolorange Жыл бұрын
Using any metal other than aluminium could cause a chemical reaction with the bleach, so will previous colour treatments and water with heavy metals in it.
@nicolorange Жыл бұрын
Using a higher level of developer (50vol) should have just made it work quicker, if left too long it'll start breaking down the bone thought.
@benbolton27632 жыл бұрын
Great video! Moping glue, is that PVA glue?
@mtloutdoors70622 жыл бұрын
Mop n glow is the product name, it’s a floor shine/cleaner found at local grocery store
@jackandtheoutdoors97564 жыл бұрын
Is it ok if its bubbly when you paint it on there
@mtloutdoors70624 жыл бұрын
Jack Cassullo Yes that is fine, just put as many coats as it needs to get it to the desired white.
@jackandtheoutdoors97564 жыл бұрын
Thank you
@Yomamaonmyballs3 жыл бұрын
So can I do this with just the 40% cream development or do I need the powder to?
@jacobnaeyaert94173 жыл бұрын
Just the cream works fine.
@Yomamaonmyballs3 жыл бұрын
@@jacobnaeyaert9417 thank you I love how mine looks now thanks for the help 🤘🤘 I will keep your Chanel in mind 👌
@ashtonvega83013 жыл бұрын
Will 30% work ?
@codiefrazier83373 жыл бұрын
How do you make your hangers?
@dpidaho42453 жыл бұрын
go to "The Backwoodsmans Institute" youtube channel. he shows you how to make it. super easy!
@yoboihamsamgaming5206 Жыл бұрын
8 dollars on Amazon lmao that bottle is 25$
@claytonburns33493 жыл бұрын
Jesus saves
@SuperEasySuperFast4 жыл бұрын
Hello MtL Outdoors! Our Marketing team would like to get in contact with you about using our products. Would you please contact them at marketing@superclean.com to discuss this further? Thank you! The Super Clean Team