How to blend a silver with Permahyd Hi-Tec 480

No video

How to blend a silver with Permahyd Hi-Tec 480

Рет қаралды 18,110

5 жыл бұрын

This time our paint expert Tony Mitchell wants to show you an everyday blending job using Permahyd Hi-TEC Basecoat, and Permahyd Hi-TEC blender.

Пікірлер: 34

@willcarrillo3639 4 жыл бұрын

This the most complete blending video that I watched. Just hope some clients where eager enough to learn.

@Spieshecker 2 жыл бұрын

Glad you like it!

@georgepulido3258 2 жыл бұрын

Best blending video I seen from start to finish

@Spieshecker 2 жыл бұрын

Thank you, glad you like it...

@acemobile554 Жыл бұрын

Excellent thank you for your superior video tips the permahyd HI TEC product looks like a premium product and the painters are awesome.

@Spieshecker Жыл бұрын

Thx for your feedback, glad it is of help...

@carmonaaa5782 5 жыл бұрын

Please make more I use spies hecker everyday and always enjoy watching videos to learn new tips on the application processes

@Spieshecker 5 жыл бұрын

Great feedback, don’t worry we have a lot of new videos in production.

@chidexkofi8789 4 жыл бұрын

Great video

@Spieshecker 2 жыл бұрын

Thx

@edilsonaraujo1118 2 жыл бұрын

Here in Brazil vw is very strong, my tools are all Bosch.

@ericvalencia08 5 жыл бұрын

Can you make a video on hs clear 1.5 coat process?

@hanabraun6012 5 жыл бұрын

I noticed that you seemed to be adjusting the air pressure after the blend. Could you please give detail on your procedure. Thanks

@Spieshecker 5 жыл бұрын

Tony reduced the pressure to 1.6 BAR on the quarter panel to keep the blend as small as possible as there was not a lot of space to work with. After that it was turned back to 2 BAR for the rest of the job.

@bkbangherr 5 жыл бұрын

Luv these tips would like to see some on pearl whites as well I've found that not hardening the ground coat but wet on wet application helps with bumper jobs matching little better seems to darken or mix with ground so that it doesn't have that super white side tone? If that makes sence

@Spieshecker 5 жыл бұрын

We have 3 stage white repair video ready, and will be released in November 2018.

@bkbangherr 5 жыл бұрын

Ty luv ur product just trying to educate myself as much as possible

@bkbangherr 5 жыл бұрын

Would like to add on some jobs like for ug if I leave wt386 flop control out of mix on bumber jobs seems to work but Nissan QAC which has hardly any wt386 with no chips even with Camara always seems to be too white so I have to come up with something that works or blend qrt panel or fender if to off

@bkbangherr 5 жыл бұрын

Also got my 1st 46g in today Mazda excited to play with that I'll let u know how that goes read TDs been waiting on this one for awhile now sorry I have no one to bounce this stuff off but paint reps lol i paint between 200-300 hrs a week

@soohyunkim6066 5 жыл бұрын

I think This is for waterbone system

@eviljoker303 4 жыл бұрын

Great video can you tell me what gun Tony is using?Looks like a Satajet with an Adam 2 dock from what I see .

@stephennaylor9107 4 жыл бұрын

its the Sata Phaser RP 1.2 and with Adam as you mentioned

@benoitcor 5 жыл бұрын

I have a technical question concerning 8098 Clear. Is the 3394 Reducer a reactive Reducer? Am I obligated to add it to the mix? I would like to try it without the Reducer to achieve a thicker film build as my preppers love to leave pinholes in their repairs. And yes, I do know do know the solution to the problem is not a thicker Clear lol!! Just one of my "Real Life Body Shop" problems!!

@Spieshecker 5 жыл бұрын

The 8098 is a North American product, so best is to contact your local Axalta technical team - but thanks for watching.

@thistledewoutdoors3331 4 жыл бұрын

I used to spray Spies back in 2009... If you are having pinhole issues - That need to be addressed before the primer goes on... So,,, Who is primering ??? They need to mix up some dolphin glaze & get after them pinholes & apply with a razor blade. If all else fails - Although not suggested,, At the very least finger paint in the pinholes with primer..... Anyone spending the amount of $ to spray Spies in their shop shouldn't be running their shop like that..

@georgepulido3258 2 жыл бұрын

Damn this guy is a killer

@Spieshecker 2 жыл бұрын

😁

@DanLittlechild94 5 жыл бұрын

Hi guys, was the base applied with a HVLP?

@adrian4maf 5 жыл бұрын

Yes. It looks like SATA

@tallon3865 3 жыл бұрын

At 2:47 on this vid, you change something ? was it pressure ?? thanks

@Spieshecker 3 жыл бұрын

Hi, yes you are correct. As I had limited room available to make the blend on the rear fender I used a slightly lower air pressure (1.6 bar) to restrict repair size. Once done I then adjusted the guin to the normal recommended 2bar inlet pressure for the main repair area and blend on the front door.