How to Board a Van | Quickly and Effectively!

Рет қаралды 46,784

2 жыл бұрын

This is how I Ply lined the floor of my van. It is an easy way of getting a good quality, scribed floor.
Thank you for watching! This is my first video and I have many new video ideas lined up. I would be grateful if you considered subscribing. I will be aiming for much better quality videos in the near future.
For step by step instructions on the video please turn on the captions!
Music-
Song: Ellis - Clear My Head [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/ClearMyHead
Watch: • Ellis - Clear My Head ...
Song: Cartoon - Howling (ft. Asena)(Andromedik Remix)[NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/HowlingRmx
Watch: • Cartoon, Jéja - Howlin...
Song: Disfigure - Blank [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/blank
Watch: • Disfigure - Blank | Me...

Пікірлер: 64

@paulmaryon9088 10 ай бұрын

Brilliant, the perfect example of the use of the ticking stick, didn't think anyone used this method these days, great video thank you

@mwjoinery 10 ай бұрын

Thank you for the comment! It is a very handy method for doing some task isn’t it!👍🏼

@georgeshaw6207 2 ай бұрын

Like some other comments. I’ve seen loads of videos on this but nothing as accurate and professional as yours. I’m still trying to work this method out but your work is outstanding! Thanks George

@mwjoinery 2 ай бұрын

Thanks a lot! If there are bits you are unsure on I can try and explain it a bit better? It is a very useful method once you get the hang of it. Thanks again for the comment I appreciate it!👍🏼 @georgeshaw2607

@JoLynch0 Жыл бұрын

There are so many of these instructional videos on youtube and this one is actually the best! Should have many more views! You've done a great job and it's very well explained. Thank you for sharing!

@mwjoinery Жыл бұрын

Glad you enjoyed! Thanks a lot!!👍🏼

@stevehiggins1263 8 ай бұрын

when you laid that first board in the back of the van it all made sense lol, tidy job

@mwjoinery 8 ай бұрын

Thank you!😆

@volodymyrsidenko2230 2 ай бұрын

Wow, thanks a lot. I've never seen this method before, excellent stuff. I'm at the floor stage of conversion, and I'm definitely going to give it a go. What grade sand paper for the ply edges is the most suitable from your experience.

@mwjoinery 2 ай бұрын

Thanks a lot for the comment. I have since got rid of my van and just have a car… keep thinking about getting a van to convert and I’m getting very tempted! Hope yours goes to plan! I can’t remember what I used exactly but for most things 80 and 120 grit covers most bases so I would recommend them. Thanks again👍🏼

@Mike-kr9ys 11 ай бұрын

Thanks for sharing this information. This was helpful, useful, clearly presented, and the videography was really good for your first video. I liked how you slid the tie down covers into place.

@mwjoinery 11 ай бұрын

Thanks a lot! Appreciate it! Definitely need to put some more time into it and make a few more videos soon! Hope they will be of help to you as well😄

@philsimpson2854 5 ай бұрын

That’s the best I’ve ever seen, and I’ve watched lots of videos on this 👍🏼

@mwjoinery 5 ай бұрын

Thanks a lot! Really appreciate it😁👍🏼

@siertimunkaidinkumfiasterd7978 Ай бұрын

whoa, that took a minute to process, but once you get your eye in it's very simple and very clever. now i need to do this on £60 a sheet marine ply with no mistakes........

@mwjoinery Ай бұрын

Yeah it’s quite simple just hard to get it across in a video😆 well I wish you luck! I wouldn’t say it needs to be done out of marine ply if you have something a bit cheaper. I just used the cheapest ply i had because it shouldn’t get wet at all. One thing I would definitely recommend is screwing it rather than just sticking it down. I left my van parked in the sun one day, opened the back and they had lifted up😆

@joehoffman7019 10 ай бұрын

Outstanding job. Brilliant. Keep up the great work!!

@mwjoinery 10 ай бұрын

Thank you! Appreciate the comment😄👍🏼

@markchambers9415 Жыл бұрын

brilliant well done mate.

@mwjoinery Жыл бұрын

Thanks for watching! Appreciate the comment👍🏼

@2andmorewheels322 10 ай бұрын

Top job

@mwjoinery 10 ай бұрын

Thank you!😄

@peaceprayer595 3 ай бұрын

I've got a better idea: Buy the mat (rubber or carpet) that is custom made to fit in your van. Now you have a template. It give you not only a base for all the ridiculous angles and cut outs, but you also have a nice surfact to lay over the wood after you put it in.

@mwjoinery 3 ай бұрын

I get your point 100% and them rubber mats are great but in terms of costs, this only cost me around £30 for the ply and that’s all I really needed. After the video I also got an off cut of carpet and fitted that on top.

@peaceprayer595 3 ай бұрын

You also have a great approach sir and your video was awesome! @@mwjoinery

@mwjoinery 3 ай бұрын

Appreciate it👍🏼 and thanks for your first suggestion as well. Always open to any criticism/ suggestions😁

@user-dv7wh8tm2p 7 ай бұрын

Very skillful work

@mwjoinery 7 ай бұрын

Thanks a lot!!

@ricks3085 Жыл бұрын

Coming from a bad boy carpenter like myself I can see your also a bad boy carpenter 👌🏼

@mwjoinery Жыл бұрын

Thank you😄👍🏼

@2scots 3 ай бұрын

Pure Brilliant 👏

@mwjoinery 3 ай бұрын

Thanks a lot! Appreciate the comment😁

@2scots 3 ай бұрын

You deserve it. I had never heard of a tick stick till this video. You made a hard job easy. I have watched tones of videos of guys taking each measurement and writing them down then going to the work peace. Nice work, bud.

@mwjoinery 3 ай бұрын

Thanks again!😁👍🏼

@fireblaster9961 2 ай бұрын

Pretty sick...I just used a template of floor protecter sheet

@mwjoinery 2 ай бұрын

Yeah that is a good idea using that. It does come in very handy for templates👍🏼

@dandt6339 Жыл бұрын

Cool

@mwjoinery Жыл бұрын

Thank you👍🏼

@evictioncarpentry2628 Жыл бұрын

This is commonly referred to as the "tick stick method"

@mwjoinery Жыл бұрын

It is indeed👍🏼 Thank you for watching!

@adrianrowland2394 Жыл бұрын

I was looking at doing my lwb connect but don't think I will now not got half them tools didn't realise there was this much involved.

@mwjoinery Жыл бұрын

Thanks for watching! Yeah in all fairness it is a bit of a tricky task. It’s definitely doable with more basic tools but if you aren’t 100% confident doing them i think you can buy pre cut ones on ebay for that type of van👍🏼

@fightington 6 ай бұрын

Cant believe how many dog- sh vids i had to watch till i found this. Will take a minute to worl out wth is happening but i know this is whats up. Thx and hope you get more views in future because this is top-tier

@mwjoinery 6 ай бұрын

Thanks a lot!😁

@jerryguillaume6435 10 ай бұрын

Hi there, what did you use to glue the wood flooring onto the floor of the van?

@mwjoinery 10 ай бұрын

Hi, It was just some all purpose adhesive. I would definitely recommend you to screw it down if possible rather than using the adhesive. Thank you for watching😄

@finnomara4148 10 күн бұрын

Looks amazing finish but haven't a clue what's going on or how you get started 😢

@mwjoinery 10 күн бұрын

Hi, thank you. It is a bit of a confusing thing to explain especially when it is not in person. If you search ticking stick method on KZfaq it will show you some tutorials of how that method is used. Then I just used that method on a slightly bigger scale. I did also try and explain it a bit in the captions on the video if that helps at all? Thanks for watching

@bloggs692413 Жыл бұрын

pucker job .... new sub here

@mwjoinery Жыл бұрын

Thank you! I have plenty of new videos planned for the near future!👍🏼

@bloggs692413 Жыл бұрын

@@mwjoinery super your doing some great content need more 👌

@garvielloken3929 Жыл бұрын

Bro what hole saw are you using? My ones like takinng my wrist with them

@mwjoinery Жыл бұрын

It’s actually an unbranded one i found in the garage what is probably as old as me!😆 just don’t apply much pressure and keep your drill on the slowest setting!👍🏼

@garvielloken3929 Жыл бұрын

@@mwjoinery 🤔 Nooice! Will try that

@bakit3927 4 күн бұрын

What is the use of boarding the floor isnt the mat enough for flat?

@mwjoinery 3 күн бұрын

I boarded it just because most vans these days come with like a hard plastic floor in them but they follow the contours of the floor for some reason rather than making them flat. I don’t understand why they don’t just make them flat personally because sliding any sheets in on the contoured floor was a nightmare. Thank you for watching👍🏼

@nutterhm 10 ай бұрын

what glue are you using ?

@mwjoinery 10 ай бұрын

Hi, sorry for the slow reply. I just used some multi purpose adhesive because it was a fairly new van so didn’t want to be screwing through the floor. I would say it would be better to screw it though looking back now. Thanks for watching!

@nutterhm 10 ай бұрын

Thanks for the Reply will screw it @@mwjoinery

@mwjoinery 10 ай бұрын

No worries😁👍🏼

@WrathOfVaz 11 ай бұрын

Where are you based? Can you do my van please :-D

@mwjoinery 11 ай бұрын

Hi, I’m based in yorkshire. I’m sorry but I haven’t got time at the minute to take on any side jobs. If you have a search on ebay you can get some decent pre cut sheets to fit your van and they was fairly cheap when i last looked mate👍🏼