How to bore small wheels bigger

Рет қаралды 63,845

3 жыл бұрын

In todays video me and my friend bored out new wheels that are going to be going on the G35. We came up on the perfect set of wheels for the widebody we got coming up, but the bore size was smaller than what we needed. So when machine shops don't want to do the job, we had to take action ourselves and increase the center bore of the wheels and get the job done. If you guys have the same problem, I definitely encourage boring the wheels your self if you can't get a machine shop to. See you guys soon !
Make sure you guys Like, Comment, Subscribe and hit that BELL for us, it will help us out a lot.
NEW VIDEOS EVERY WEEK, SO STAY TUNED!!!!
🎥 TikTok:
www.tiktok.com/@luminary.comp...
📸 Luminary Instagram:
/ luminary.com...
📸 Owners Instagram:
/
📸Owners Instagram:
/
📥Email us:
luminaryapparelstaff@gmail.com

Пікірлер: 126

@paulbrimo4437 2 жыл бұрын

How to bore without being boring. Thanks for keeping the video short and to the point.

@dequantelumpkin5746 3 жыл бұрын

Right on time thanks worked out perfect for me

@Alex-vz2jz 2 жыл бұрын

Nice, I was thinking about taking my wheels to a shop because wheels seems like something you don't want to mess with. I got honda specific wheels from some dude and i think im going to bore them to fit my 240sx. Thanks alot for the video and this just shows that yes anyone can do it at home with enough patience and test fitting after ever pass

@LuminaryCo 2 жыл бұрын

Definitely go for it ! That’s dope, I hope they turn out great bro. Glad this video helped you out and encouraged you to try it for your self ! You won’t be disappointed !

@mrcomenttoe2009 Жыл бұрын

Thanks for the simple and easy video man

@LuminaryCo Жыл бұрын

Glad I could help !

@unknowng3796 2 жыл бұрын

Clean 💯

@1988dyork 3 жыл бұрын

Yall saved me alot!!! Of 💰👍👍

@LuminaryCo 3 жыл бұрын

Glad we were able to help you out ! 🤝

@richardpendrill3990 Жыл бұрын

Another option if you don't want to use a router spinning at 30000 rpm and you only need to remove a millimeter of aluminum. Buy a rotary rasp ($8 at Home depot). Stick it into your drill and make circular passes with even pressure. Check every few passes (you will see the material being removed) with your calipers and test fit on the hub. If you only have to remove a mm, it will literally take only a minute. Just did it on my BMW X5 with some snow tires. Getting the right router bit with the correct mandrel size can take some time. This solution works like a charm. Very simple......remember this is soft aluminum....you don't have to do much to remove material.😊

@user-cf4kq9zd7w 4 күн бұрын

Thanks men

@eidmohammad3022 Жыл бұрын

Thank you too much for your video where can I get one of this device? And is it single phase?

@BassGods 2 жыл бұрын

I remember boring my Dayton's for my Nissan Maxima back in the 90s. Their was no way in hell I was going to return my rims. I was very determined to get my wheels to fit, at any cost. 🤣 I loved those wheels. It was a hell of a job, but I got it done. The sad part is, my passenger side wheel came off a couple months after installation. 🤣 Man I thought I was cool back then until that happened. "EMMMBARASSING"

@LuminaryCo 2 жыл бұрын

How big did you bore them ? 😂😂😂😭😭

@BassGods 2 жыл бұрын

@@LuminaryCo Don't quite remember. It was Yeeears ago. But I most likely over did it. 🤣

@mrcomenttoe2009 Жыл бұрын

The diameter of my rim to my hub with smaller so this worked perfect and very easy thanks you guys maybe I'll post a video of how mine came out thanks again peace out

@mrcomenttoe2009 Жыл бұрын

😃👍Yeah man perfect I got the same bit put it in the router was simple and easy to do came out super clean

@Niedski_Productions 11 ай бұрын

do the wheels wobble on the highway?

@grodriguez3430 2 жыл бұрын

I’m bout to do this to my g35 wheels to fit my new edge haha 😎thanks

@LuminaryCo 2 жыл бұрын

No problem 🤙🏻, hope everything goes smoothly !

@lalo2641 Жыл бұрын

Thanks guys 👍

@LuminaryCo Жыл бұрын

Glad we could help !

@lalo2641 Жыл бұрын

@@LuminaryCo thanks

@richardfix3937 6 ай бұрын

I like that you left the outer portion stock so you can still balance them

@YungChem 7 күн бұрын

Wdym by “outer portion”?

@FrontlineSpice2 9 ай бұрын

Yo it's 2023. I'm about to do this to get 2019 Accord stocks to fit my Z! Thanks guys

@stevenmartin8234 2 жыл бұрын

Have you got a product number for the router bit please

@OscarHernandez-ym4hx 7 ай бұрын

Fffenn Kool .. Nice job.

@khalidbowe4865 Жыл бұрын

This worked perfectly for me brotha thank you.

@LuminaryCo Жыл бұрын

Glad I could help ya out 🤝

@Niedski_Productions 11 ай бұрын

any wobble at high speeds?

@khalidbowe4865 11 ай бұрын

@@Niedski_Productions Nope I cut it perfectly. Nice and slow. Do one pass then retest and repeat. So that way you don’t shave off too much.

@kyesershane Жыл бұрын

Can you send the link or name of the bits thanks

@LateNightRituals 11 ай бұрын

Genius

@RA-uj3nm Жыл бұрын

Impressive.....well presented. 👍👍

@pppidsn647 6 ай бұрын

Is 77.8mm to 110mm possible? how hard? Thank you so much.😃

@Channel505 Жыл бұрын

Thanks for the vid, but what kind or size of bit did you use, I can't see it on the package in the vid, thanks again

@LuminaryCo Жыл бұрын

1/4-3/8-1/2 router bit

@jorgeloredo3409 2 жыл бұрын

Need HELP ! Buying rims 6*132 74.5 center bore and need to go to 6*139 77.8 center bore

@propartymixer08 3 жыл бұрын

I have a 71.5mm bore on my Audi but my rim bore is a 57.1mm. I have a wheel space hub centric set up with a center bore at 66.5 but need the rim to be adjusted from 57.1mm original bore size to 66.5mm on the wheel spacer.

@LuminaryCo 3 жыл бұрын

Keep shaving off little by little and test fitting your spacer. That’s what we did here to get almost exact fitment.

@busystuff23yearsago15 2 жыл бұрын

I got a different tool... but I think it’s gonna work out anyways I got S2K rims which are a tad too small on the hub bore to my mustang so im gonna be cutting into them soon enough

@LuminaryCo 2 жыл бұрын

What tool did you end up using out of curiosity ??

@OscarHernandez-ym4hx 7 ай бұрын

Yes what tooo?

@markrivera360 3 ай бұрын

What bit is this partnumbrr

@mexicant407 Жыл бұрын

I found a heck of a deal on a set of wheels & it is 13 off. I am wondering if i can rout out the bolt holes. I typed this in to see if i can diy it. Thx yos

@LuminaryCo Жыл бұрын

Hope the video helped you out and pointed you in the right direction 🤝

@royrussell5272 2 жыл бұрын

what size bit

@willfry5331 3 жыл бұрын

If I'm going from 63.4 to 65.1 what bit do you recommend?

@LuminaryCo 3 жыл бұрын

I’d recommend the same bit that we used in this video. For my wheels we went from a 64.1 - 66.1. Just make sure you have a guide and shave evenly. 1/4-3/8-1/2 router bit

@what9621 2 жыл бұрын

Yes, but how do you guide the bit evenly around the center bore hole; I didn't see any guide.

@ridewithjash 2 жыл бұрын

they don't, this is the wrong way to do it and if they overcut, they're putting weight on the studs

@what9621 2 жыл бұрын

@@ridewithjash true, and if they didnt cut evenly around it will vibrate at high speed wouldn't it.

@pinkythefinger7432 8 күн бұрын

With a 1/16 undersized bearing on a flush cut bit the bearing becomes the guide. It's simple router techniques that usually apply to wood working. You then flip it over and this time you use the flushcut bit with the flush bearing. This method allows you to take a perfect 1/16 each time you do it

@nghiadinh7427 4 ай бұрын

Brother can i have name that machine you got ?

@panhialo7676 3 жыл бұрын

What is that tool called that you guys used to for the rim

@LuminaryCo 3 жыл бұрын

It’s called a router tool, usually used in woodworking.

@SlowCarsFastSFV Ай бұрын

Hardly any shops will do this..

@MarioSmyth4 3 жыл бұрын

I need to go from a 66.1mm to 67.1mm bore, any good bits you recommend

@LuminaryCo 3 жыл бұрын

1/4-3/8-1/2 router bit

@jayc3274 2 жыл бұрын

Lol I got the same problem my wheels are 66.1 & my Kia Optima is 67.1. How’d it go for you?

@dat3.8ltr56 3 жыл бұрын

I need to go from 66.1 to 70.3 what bit you think

@LuminaryCo 2 жыл бұрын

You can definitely use the bit that I used in the video. Just take your time and measure accordingly after passes with the router.

@corywill9735 3 жыл бұрын

what bit did you use? i cant see it on the video.

@LuminaryCo 3 жыл бұрын

1/4 - 3/8 - 1/2 router bit

@stevenmartin8234 2 жыл бұрын

Have you got a product number please

@gregpalys5614 2 жыл бұрын

BOSCH 85269M 3/8 In. x 1/2 In. Carbide Tipped 2-Flute Flush Trim Bit

@DreadedFLOW 2 жыл бұрын

You guys stay in GA by chance ??

@DreadedFLOW 2 жыл бұрын

Nvm

@LuminaryCo 2 жыл бұрын

@@DreadedFLOW Chi-Town bro 😎

@robinsonbernabe392 Жыл бұрын

yeah is it perfectly round?

@LuminaryCo Жыл бұрын

We tried to get it as perfect as possible by checking fitment with spacers hub and fit is very tight. We also used a dremel to make surface very smooth in the end. I’d say it’s pretty well rounded.

@greglambert4424 2 жыл бұрын

Xtreme lol

@nijovacisoen4395 2 жыл бұрын

How long did the process took ?

@LuminaryCo 2 жыл бұрын

Process took about an hour or so to get through all the wheels.

@johnadrianabellana1631 4 ай бұрын

Whats the machine called?

@LuminaryCo 4 ай бұрын

Called a router, usually used in wood working.

@ludjgdrkp5251 Жыл бұрын

If the hole isn’t perfectly centered will the wheel hop?

@LuminaryCo Жыл бұрын

Hubcentric rings easily eliminate that.

@ludjgdrkp5251 Жыл бұрын

@@LuminaryCo how so

@LuminaryCo Жыл бұрын

@@ludjgdrkp5251 it’s an adapter that can fit any bore size wheels to original car hub.

@LuminaryCo Жыл бұрын

@HETRO WHITE CHRISTIAN LIVES MATTER! 😂😂😂😂😂😂… none of this info is correct

@LuminaryCo Жыл бұрын

@HETRO WHITE CHRISTIAN LIVES MATTER! studs only are they’re to bolt down and keep wheel on. The bore (CENTER) is what keeps it balanced.

@crazyyakuza8741 2 жыл бұрын

I hope you know the bore has to be really precise because that what your wheels sits on . If it doesn’t mount on perfectly the bolts won’t won’t seat .

@LuminaryCo 2 жыл бұрын

Yes we are very well aware of that and took our time with each pass through, and hubcentric rings are an easy fix 🤙🏻

@playboyfranky2197 2 жыл бұрын

What’s the name to this tool ?

@LuminaryCo 2 жыл бұрын

It’s called a router

@antphill6881 8 ай бұрын

What's the name of that tool?

@LuminaryCo 8 ай бұрын

Router

@viewpichannell 2 жыл бұрын

you can fit . but its not guaranteed the wheel not be shaking .

@LuminaryCo 2 жыл бұрын

That’s what hub centric rings are for.. 🤦🏻‍♂️

@viktormuller1609 Жыл бұрын

@@LuminaryCo nope they are not :D stop giving false informations

@johnj2496 8 ай бұрын

hub centric assuming you new bored the wheel hubs to the actual center if not stick to lug centric and those wheels wont ballance till the hubs get bored to true center

@MarioSmyth4 3 жыл бұрын

Also how deep did you cut

@LuminaryCo 3 жыл бұрын

Depending on how the back of your wheel looks, you should have a guide where you see the hub bore start and end.

@GetFamousORDIETRYING Жыл бұрын

👍🏻👍🏻🤙🤙🤙

@bigo9293 2 жыл бұрын

Can't find this router bit anywhere! Anyone help?

@LuminaryCo 2 жыл бұрын

Check your local Lowe’s !

@bigo9293 2 жыл бұрын

I'm UK dude we don't have lowe's

@LuminaryCo 2 жыл бұрын

@@bigo9293 Amazon it bro, only thing I could really think of since I’m not really familiar with the UK..

@bigo9293 2 жыл бұрын

@@LuminaryCo did u guys take the bearing off mate?

@LuminaryCo 2 жыл бұрын

@@bigo9293 we did not take the bearing off.

@premierlocksmith4716 3 ай бұрын

What about car shaking on high speeds? Do you get that?

@carlosruelas8781 2 жыл бұрын

Did you notice any wheel vibration after you bored the wheels

@LuminaryCo 2 жыл бұрын

Been up to 30 mph with the wheels on driving around my neighborhood and they felt great. But not highway yet since I’m waiting to finish up the widebody to finally mount the wheels for good. But hub centric rings are an easy fix if so.

@carlosruelas8781 2 жыл бұрын

@@LuminaryCo thanks for the reply bro. I just cut my wheels lol. Using a wheel spacer as a guide by marking it and pressing it on wheels helped a lot as well as the bit you recommended. 🤘🏾

@LuminaryCo 2 жыл бұрын

@@carlosruelas8781 glad everything worked out bro !

@adonaimartyr Жыл бұрын

I’m tryna go from 5x114 to 5x108 What’s your solution to that ?

@LuminaryCo Жыл бұрын

Adapter kits for your bolt pattern.

@checolate9680 2 жыл бұрын

Maybe Japanese cars, yes. Chevy's which are hub centric, no. May be with the right tools.

@LuminaryCo 2 жыл бұрын

All cars are hub centric tho. No car in todays age disperses weight on the wheels studs lol..

@checolate9680 2 жыл бұрын

@@LuminaryCo I do not know about today's cars. I have a 77 Camaro and I want to swap BMW or other brand wheels on it. I have done research and it seems that there is hub centric and lug centric. I willing to modify the wheels bc I do not want to spend money on new ones.

@LuminaryCo 2 жыл бұрын

@@checolate9680 ohh yeah ! I get you, I have heard of those lug centric with German cars.. also how certain car makes have removable studs that are like screws.

@dustyrhodes2717 2 жыл бұрын

God that looks like total dogshit. Shave your face until if/when it decides to grow a beard. Work with what ya got. Good luck.

@LuminaryCo 2 жыл бұрын

This video was made during Covid lol, I was growing everything out 😂🤣..

@robertmoffattrob122 8 ай бұрын

$20 bucks for that router , yeah it was stolen

@LuminaryCo 8 ай бұрын

Lmao or good fb market deal

@EricWillard20 Жыл бұрын

This is NOT recommended. There are precise tools required to ensure that these wheels are centered on the spacer/rotor. I know vehicles well, I’m not an expert, but this sort of “hack” will do more harm than good.

@LuminaryCo Жыл бұрын

Understand where you’re coming from. But hubcentric rings easily eliminate any problems.

@viktormuller1609 Жыл бұрын

@@LuminaryCo no they dont... I have no idea where you got this info but hubcentric rings only help with bore size not centering so If you bore it out of alignment (move center of the hub by taking more material from one side than other for example) hubcentric rings will do nothing to realign it. So yes this is definetly not really a good idea.

@johnj2496 8 ай бұрын

if your using cone lug nuts you could hace them.centers out with a chozzle and they would ride fine BUT if you did not bore these accuratly the next time you need tires the tire balancers use that center bore to locate and hold the rim if its off those wheels either not ballance or possible ballance off the new not center center bore yall cut ? good luck and dont forget to make stupid faces when you make that video 😕😟😡🤬