How To Build A Baseboard - Part One
Рет қаралды 33,510
3 жыл бұрынIn this Hornby How To Series we show you how to build you very own baseboard.
Subscribe To Hornby: rb.gy/3v7ida
Latest Videos: rb.gy/vnbcqt
In part one we look at constructing your outer frame to add support to your baseboard.
www.hornby.com
#Hornby #ModelLayout #HowTo
~-~~-~~~-~~-~
Watch: "Hornby 2023 Range Revealed: All The Details You Need To Know"
• Hornby 2023 Range Reve...
~-~~-~~~-~~-~
@NathanielKempson 3 жыл бұрын
you might want some cross bracing there. The twist on that thing is mental!!
@richardswiderski4985 3 жыл бұрын
Very good video with clear instructions.Well done.
@figleydale3915 3 жыл бұрын
Really clear and easy to follow, thank you!
@jamesn3485 3 жыл бұрын
Superb video. Don’t underestimate how offputting the carpentry part of building a model railway is to a family with no one suitable to help with it. Although Hornby doesn’t sell baseboards explaining how this works is really important to helping new people into the hobby. See also - circuitry.
@rapidgaming3400 3 жыл бұрын
This is actually pretty good Thank u for helping me I also applied for the Christmas Grotto competition And hope to win ✌️
@AlecDenholm 3 жыл бұрын
A six by four and a half inch sheet of ply? You sure about that chaps? I think you meant a six by four foot sheet of half inch ply. Otherwise the baseboard will be shorter than an R600 Single Straight.
@rapidgaming3400 3 жыл бұрын
I also liked
@resultsIT11243 3 жыл бұрын
That's great. If I wanted to build 4x8, can I make it the same, just with an extra support beam?
@Baldy444 Жыл бұрын
Half inch ply? In my local UK timber merchant this would be sold as 2440 x 1220 x 12mm which you cut down to 1830 x 1220mm. There seem to be different types of ply available, would hardwood ply be best?
@AcidEric01 4 ай бұрын
just what I was wondering since the UK has been METRIC now since before I was at school. I don't do imperial units.
@Jackmole 2 жыл бұрын
How much did this cost for you and where is the best place to buy the stuff
@tamagotime3294 3 жыл бұрын
Thank you Mr Hornby, but it's on fire, what do I do?
@gs425 3 жыл бұрын
Metric please, Mike. Your target audience will be using millimeters. Otherwise great video
@bentullett6068 3 жыл бұрын
Yes some of the younger generation under 50 were taught to use Metric measurements
@philipstokes2824 3 жыл бұрын
No thanks imperial is easier to use
@Poliss95 3 жыл бұрын
All materials are sold in metric sizes these days.
@bentullett6068 3 жыл бұрын
And most people under the age of 50 were taught to measure in the metric system of measurements
@Poliss95 3 жыл бұрын
@@bentullett6068 I'd say it was under 65. They were just about to stop teaching Imperial measurements when I left school in 1970.
@bentullett6068 3 жыл бұрын
@@Poliss95 I thought it was later than that as I know loads of people including my dad who is in his 50's who still use imperial units of measure.
@richardharvey7208 3 жыл бұрын
@@bentullett6068 Hi I was 54 last November and I was taught in both for the last time officially at school as our exams were the last to incorporate imperial measurement. Funny I am an Engineer but my world is see through imperial eyes so this sounds quite at ease ...2.5 cm to a inch how could you go wrong Richard
@Pugragger 2 жыл бұрын
what the chuff are security goggles
@luketrainsplanes 3 жыл бұрын
@hornby any reason why the Hornby forum has gone from your website and any reason why you only sent me the hornby club loco and not my membership card etc ?
@shaydailly 2 жыл бұрын
There’s a typo at around 0:32.
@blackbob100 3 жыл бұрын
It is disappointing that Hornby are still using imperial measurements. We have been metric since 1965! I reckon most folk have never used feet and inches. Come on Hornby we are in the 21st century.
Chadwick Model Railway
Рет қаралды 69 М.
That Model Railway Guy
Рет қаралды 139 М.