Do you live anywhere near omaha nebraske and willing to help me build this lol

I went over the materials at the beginning of the video. Just enough 3/4" conduit and 90 deg brackets to fit your boat, bolts and nuts for every section, 4 C-clamps, and whatever material you want to use. I'd go with something heavier like burlap.

Just more of those blind cover materials. I just throw some in the boat box and throw them over when we set up

@TheJByrd thank you for the reply. Have you built an overhead system to add on to this?

@@camanuch100 no I just throw netting over the top and create holes to pop up out of

@TheJByrd thanks for the update. I'm just laying out my set up. This way I'll be ready for next month. Need to order grass

@@L33T_killa yes sir, 1542

If you’re building an X frame like this one, you can just do one pin in the middle of each x to hold it up. If I were to do it again, I wouldn’t have the X frame design with hinges on the outside. I’d do more of a V frame with hinges on the inside. Easier to access and step through than crawl through an X. And grind any excess bolts down so they don’t catch on anything. And use better material than cheap camo netting. I just redid mine recently with better burlap sort of netting and it’s gonna hold better I hope.

Amazon. I recommend something thicker like a burlap base though. I picked up another one on Amazon recently and it’s much better. The old netting tore too easily.

I break it down in the video and say length and how much you need for each. Pending the size of your boat and the measurements it produces will determine the lengths of conduit you need and how much hardware.

It should. That’s another build design I was thinking about going with. Someone else just has to hold it while you line it up and drill it tho to make it perfect on each side.