How to Build a Crosskart in Your Garage: DIY Fully Independent Off Road Go Kart

Рет қаралды 103,895

2 жыл бұрын

This is not a Sierra Car! This is a Crosskart Chassis designed to take a variety of engines and components to fit your budget and your exquisite taste in driving, I named it the VF-1 for variable frame Kart. You can make it for dirt, asphalt or a mix of everything. My budget for each one was $5K, I too wanted a crosskart but there was no way my family would let me spend that much on one! I built the first one for myself (#27) and made plans and a walkthrough video series at the request of builders. I use affordable and easily available ATV parts to reduce cost and have used three different engines in the same chassis with great success. Builders who used the plans have applied other engines and even snowmobile engines! I followed the technical rulebook for the European Crosskart series for dimensions and safety, however, currently in the garage as the next build is a chassis that was stretched to show how easy it is to adjust the legroom when building the chassis (see link below). This is using a predator 420cc and has a build budget of $2K! Build yours however you want and show it off in the facebook group or on your own KZfaq Channel! Sorry I do not sell Chassis or Complete Crosskarts, but show you how it can be done even if you are a first time builder. Enjoy the build! *Although this looks similar to a Sierra Car, I did not copy them in any way. My first one was designed in 2005 with the idea of converting ATV parts and well on its way to being built in 2016 before they ever released theirs. They make amazing machines and deserve the credit they are getting for bringing this amazing sport to the US. My hope is to make it so more people can participate.
If you decide to watch the detailed video series, know that I was new to KZfaq and it took me a couple of video's to get the hang of editing. They get better and better as you go. Thank you for checking out the content.
-Kyle
Plans available here:
kj-raycing.dpdcart.com
Plans detail and Materials needed
• Crosskart Plans: KJ Ra...
Custom length chassis
• Inexpensive Crosskart ...
Facebook KJ Raycing
Once you have the plans come join the build discussion
Facebook Build Group (KJ Raycing VF-1 and VF-2 Kart Builders) / 905565813954510
Instagram @kjraycing
Storefront kj-raycing.dpdcart.com
Sierra Cars
www.sierra-cars.com/
JD's Garage KZfaq Channel / @jdsgarage701
DISCLAIMER
Videos are for entertainment only, work performed in the video should only be accomplished by a professional technician. KJ Raycing will not be held liable for ANY personal injuries.

Пікірлер: 184

@biglon62 2 жыл бұрын

I’m 57 years old found you video and ordered your plans! Ordered my Rouge Fab bender and here I go. Raced dirt track for years but this looks fun can’t wait to get started!

@KJRaycing 2 жыл бұрын

I’m so happy to hear this. You are going to love the build and the drive. Please post pics of your progress on the facebook group; we all love seeing the builds.

@rashidabdul-salaam9090 10 ай бұрын

How did it go?

@geovannycarrionmoreno9957 9 ай бұрын

Hola que tal ,me podrías vender los planos? Soy de Ecuador saludos

@rickybailey7123 Ай бұрын

So how is the go cart going ? Looks like so much fun to drive !!

@haisetvitulle Ай бұрын

from the lack of response im guessing he finished it but unfortunately died in a horrific crash shortly after

@jumpercabledadz 2 жыл бұрын

Man!!!! This sure does pump me back up!! Haha I look at my jig everyday just waiting to start the build! I daydream everyday what it’ll feel like driving one that we will build! Driving yours was so awesome but I can’t even imagine how it’ll feel driving one that we build! Thanks for always posting great stuff!!!

@KJRaycing 2 жыл бұрын

I can’t wait to hang out with you guys again! And I can’t wait to see that monster of a motor in the crosskart!

@zakitiba2044 2 жыл бұрын

@@KJRaycing Please my dear friend, I am impressed by the wonderful design of this car. Can you send me the diagram with the actual dimensions and measurements

@chrismustry9302 2 жыл бұрын

@@zakitiba2044 you can purchase the plans

@zakitiba2044 2 жыл бұрын

@@chrismustry9302 Where can I buy it please?

@richardkautz2947 2 ай бұрын

I'm 55 years old and have always wanted to mount a motorcycle engine on a go kart, now I finally have a motor, I just have to figure out how to get it mounted (properly) to the frame . Your videos help a lot. Cool buggy build ! 👍🏻

@DirtGearTv 2 жыл бұрын

Truly amazing builds! Hard enough building and repairing one machine and yet you have yourself a small army of machines 😜

@KJRaycing 2 жыл бұрын

Thank you. It was a long year in the garage for sure getting two finished in 10 months. I can’t wait to see your 400hp monster!

@appallokelley3207 Жыл бұрын

Oh man , I’m so glad I found this video

@amitgali5136 Жыл бұрын

YOUR HANDS ARE GOLD!! YOU ARE AMAZING!

@trevorwoods2580 2 жыл бұрын

Another great video can't wait for you to get back to the build video's I find them very helpful and informative.

@KJRaycing 2 жыл бұрын

Just gotta wait for the snow to stop! I’m letting my lady park in the garage so work is on hold. Soon though my friend, we’re all getting antsy.

@moyeet7 Жыл бұрын

this is so insane! the ammount of skill this takes is unreal and im doing my best to build something similar out of a yerfdog 3203 but I dont think ill ever come close to this!

@KJRaycing Жыл бұрын

Thanks man! Keep at it, anything you build yourself and makes you smile is an awesome machine 😁👍🤜🤛

@paulturner8180 Ай бұрын

Amazing engineering!

@MarkWerner-Gillum 2 ай бұрын

Awesome job

@stevenmejia4982 2 жыл бұрын

Can’t wait to start my build.

@KJRaycing 2 жыл бұрын

Me either, I love seeing everyones builds!

@11spitdms 2 жыл бұрын

What we’ve all been waiting for. Videos!

@KJRaycing 2 жыл бұрын

I’ve been waiting for more wheel time! Can’t wait to test the pred 420 build this spring, just to see if it still has that feel of the other ones even though it will be a little slower. And I’m my daughter and I are super pumped about the two seater too!

@sal_e._mander5151 2 жыл бұрын

Such an awesome project!

@KJRaycing 2 жыл бұрын

Thank you very much! It’s been a blast!

@cjmbuya1660 Жыл бұрын

Yes I will Definitely

@FukTheGovernment465 2 жыл бұрын

I know i've said it a million times but keep up the good work man i hope you grow big!

@KJRaycing 2 жыл бұрын

Thank’s man! I’m hopefully gearing up for another summer of fun 👍

@FukTheGovernment465 2 жыл бұрын

@@KJRaycing No problem man, I'll keep on watching.

@8ballMafia 2 жыл бұрын

absolute banger

@KJRaycing 2 жыл бұрын

Thanks mate!

@morethanfactory1700 2 жыл бұрын

This is sooooo cool! 😎

@KJRaycing 2 жыл бұрын

Thank you very much! 🤜🤛

@CrazyCat229 Жыл бұрын

So cool. I want to build one. I like your design as well!

@KJRaycing Жыл бұрын

Thanks man! It’s been about 20 years of dreaming so I’m glad I got to build one and now it’s cool to be able to share it!

@CrazyCat229 Жыл бұрын

@@KJRaycing Yup also noticed the Macross Frontier stuff on your computer... I was like anyone that likes Macross is ok with me :P

@KJRaycing Жыл бұрын

Heck yes! I’ve also been collecting Macross for over 20 years… I keep that somewhat close to the chest.

@CrazyCat229 Жыл бұрын

@@KJRaycing me too.

@FukTheGovernment465 2 жыл бұрын

I see your on Crossed up OffRoad/Facebook, their are some bad ass machines in their.

@KJRaycing 2 жыл бұрын

Those guys are nuts! And their builds are pretty remarkable, tons of talent.

@FukTheGovernment465 2 жыл бұрын

@@KJRaycing Yes they have some amazing buggies for sure, talent is an under statement ha ha ha.

@slippinsideways240sx 2 жыл бұрын

God, cant wait to get started on mine. Roguefab bender should be showing up any day. Got a 2005 gsxf600 for $200 off copart. Engine runs amd has been removed and ready for the transplant

@KJRaycing 2 жыл бұрын

I forgot all about Copart!! Thank you! I’ve been looking for a good powerplant for the two seater. I can’t wait to see your build, it’s going to be awesome!

@tobiaspimentacartcross6520 Жыл бұрын

Ficaram top demais legal

@AndresPerez-gf9ur 7 ай бұрын

Kj racying are the front shocks suspension and the back are they from the 525 ktm?

@carternesbitt509 Күн бұрын

Do u need to bend tube for this or could i possibly cut at angles

@billd.akaevylaz754 2 жыл бұрын

I just finished the VF-1 Build Series. I’m very impressed with how meticulous you are with your planning and builds, so I got a set of your plans. Great work! Did I hear you mention that you had been thinking about trying a 2 seater? Any thoughts of trying 4wd?

@KJRaycing 2 жыл бұрын

Well thank you and thank you. I am currently finishing up the design for the two seater and should have plans and a chassis by spring. Optional 4wd would be amazing but can be expensive and it’s not really my style of driving. I really like the challenge of holding a big drift and finding the edge of traction and control with a 2wd. Thank you again for tuning in and stayed tuned for more! -Kyle

@mattblake8514 8 ай бұрын

@@KJRaycing whats a ball park of the cost to build one of these?

@p9raceway759 5 ай бұрын

⁠@@KJRaycing4x4 may not be your desired driving style but as a Minnesota resident having the option during winter when snow accumulations are 30” + makes this a rig that can be used 12 months a year. I’ve enjoyed drifting my Yamaha Raptor 700 on a groomed snow track during winter. I used farm tillage equipment to work the snow & let it freeze forming a smoother more level surface to drift. 3rd gear get sideways, maximum counter steer, control drift with throttle input without spinning is a blast. Having a set of taller, wider winter tires has helped me get around during winter. Lowering tire pressure helps a lot. Having your plans with 4x4 options would potentially sell more plans & get more people building machines. Increase the market to winter, mud & in between. My .02$

@zachberti4611 Жыл бұрын

I’m working on something similar as a prototype to test the technology and mechanics I want to add to a VF-1 later on. I have a 4 cylinder motorcycle engine as well but am having issues with start up and configuration. Is there any way I can DM you and get some advice?

@olandriusjenkins6356 2 жыл бұрын

Hey there will ever sale pre bent kits for just the frame itself?

@susiyantoanto9498 2 жыл бұрын

Mantaaaapppp👍👍👍👍

@Angry-Little-Fish Ай бұрын

Is it possible to build one like yours but compact to fit in a 5.5 foot truck bed?

@coopersharp2921 10 ай бұрын

Waiting for pre welded, and complete kits, probably the only way I would ever be able to get one. I am skilled in building, not so much fabrication

@Bigguy57100 2 жыл бұрын

Hi there. How do I go about getting the complete plans and drawings to build this kart. So looking forward to taking on a project like this

@KJRaycing 2 жыл бұрын

Check the description 👍

@nicholascusano96 Жыл бұрын

Love the video. Any tips on how to get started for someone with no mechanical understanding whatsoever?

@KJRaycing Жыл бұрын

Start with the budget build series then watch the other videos. The builds are all very well documented. The hardest part is to start 👍

@spiketeam3787 10 ай бұрын

i got IT!!!!!

@tobiasruet9246 2 ай бұрын

Do you have to use the clutch when shifting gears? And the even more important question: how did you manage that you only have to push the gear lever forwards and backwards to shift up or down a gear? Otherwise great video and very interesting!

@KJRaycing 2 ай бұрын

Motorcycles are sequential gearboxes, so I just put a linkage to it as a hand lever.

@AMERICA_gunexpert 10 ай бұрын

you should’ve put the lights on tops I think you could see better

@amirulindy495 4 ай бұрын

Kepengen kali punya kek gitu😢

@lXxXsoulXxXl Жыл бұрын

I want one so bad

@chrismustry9302 10 ай бұрын

Great time to start building one

@kalebspeir1279 3 ай бұрын

Do you think I could do this at 17 or to compacted I have a job I could save now and maybe have money by Sumer time to build this but idk just wondering

@KJRaycing 2 ай бұрын

I think anyone can do it to be honest. Take one step at a time. If you think about doing 50 bends it is very intimidating; if you think about making one bend it seems kind of easy. I wish you the best.

@alexilao4492 11 ай бұрын

😊

@revolversxl2836 Жыл бұрын

Hello kj I want to purchase your buggy blueprints im 5.7ft around 230lbs which one would you recommend the VF-1 or the VF-1 XL. Thanks

@KJRaycing Жыл бұрын

VF-1 and stretch the frame 3”, check the budget build for how to do it and what it looks like. It is very comfy. The VF-1 gives 6 extra inches in all dimensions of the cockpit compared to the blue crosskart in the videos.

@claytonhoemann8547 Жыл бұрын

This is fuckin awesome!!! I’ve got a Honda 500 motor. I need to build one

@KJRaycing Жыл бұрын

Thank you. The build is just as fun as the drive. I hope yo see your build progress on the Facebook group. Welcome to the fun!

@paincakes4696 Жыл бұрын

This looks awesome but I have one question because it is hard to tell. How do you remove the engine once this is fully assembled. It looks like it’s non removable once welding is completed?

@KJRaycing Жыл бұрын

Thank you. The engines come out pretty easily, check out the piston replacement to see a time lapse of me pulling a 4 cylinder engine in about 20 minutes.

@paincakes4696 Жыл бұрын

@@KJRaycing Just did! Thank you!

@jb-fh2og 4 ай бұрын

beautiful and im a snob, dont say this often

@user-jh7sy2jt1j 10 ай бұрын

Dude - add some window nets to save arms during roll over

@KJRaycing 10 ай бұрын

Save the safety stuff for your own build… The people that lose arms on rollovers also have cup holders and coolers if you catch my drift. I’ve rolled a few things and never thought to put my arms outside of the vehicle. Grip the wheel and tuck your chin into your chest. But I also made a video on making removable doors, check the channel. kzfaq.info/get/bejne/Y5yAh5N-pturnmw.html

@connordegeer6162 Жыл бұрын

Hey how much do you think the overall cost was without the engine. I’m wanting to build one but I’m not sure how much it’ll cost

@KJRaycing Жыл бұрын

There are two videos on my channel that break down cost. How much does it cost is a complicated question because I don’t know what components you plan to use. High end shocks alone could bump your budget up $5k. My average fully built cost is around or below 6k with the budget kart being under 3k with the irs setup.

@russellafowler7403 2 жыл бұрын

Do you sell a kit ? Totally unreal the quality of work you do.

@KJRaycing 2 жыл бұрын

I do not. If I had a million subscribers like the other guys I could do way more with this. I do try to break it down into easy to follow steps so anyone can get behind the welder and build one.

@russellafowler7403 2 жыл бұрын

@@KJRaycing Thanks for all your doing . Your a good person.

@KJRaycing 2 жыл бұрын

🤜🤛

@Catboy-hr2qp 10 ай бұрын

Could you use a banshee 350 twin engine in something like this?

@KJRaycing 10 ай бұрын

It was designed exactly for that reason. There have been all kinds of engines used from snowmobile, atv, crotch rocket and harbor freight engines. I think a banshee build would be nuts! I hope you get to build it 👍

@Catboy-hr2qp 10 ай бұрын

@KJRaycing whats the suspension travel on your builds? If I built it I'd be hoping for 18-24 inches, since I'd mainly be ripping down desert trails at 70+mph

@moralitoss_ 3 ай бұрын

Hello, someone knows the weight of the car? I'm working on a proyect and i need that info to progress.

@KJRaycing 2 ай бұрын

How does the weight of a VF-1 affect the weight of your project?

@bradley23btx2015 7 ай бұрын

Where or how did you source your engines? I bought the components list in hopes of a suggestion, but it’s not there. My largest concern with this build is finding an appropriate, reliable engine. Do you have links or suggestions?

@KJRaycing 7 ай бұрын

The polaris predator or polaris outlaw 500 is an outstanding, reliable bulletproof engine. Oh and it is still really fast 😎. I don’t put engines in the list because there are soooo many engines and everyone has their favorites.

@bradley23btx2015 7 ай бұрын

@@KJRaycing perfect. I just needed a nudge in the right direction. Thank you for your time and effort!

@maikelnait4495 7 ай бұрын

Engines from 80’s motorcycles work well and are quite cheap. I’ve used them in Atv-s.

@sergiolara4847 8 күн бұрын

im 14 and i want to make one can you tell me the overall price of one of these builds?

@NirSharma1 Жыл бұрын

How hard are these to control..i have experience with Rotax max karts..never drove an offraod kart

@KJRaycing Жыл бұрын

They only go as fast as you press the pedal. If you look at my videos you can see I thread all kinds of needles while sideways with the tires turnin…

@NirSharma1 Жыл бұрын

@@KJRaycing thanks...i hope i get to ride an offroad kart one day

@drsrsv8884 Жыл бұрын

Hello! What tools are needed to build this?

@KJRaycing Жыл бұрын

Bender, notcher, welder and standard garage tools. You can see everything I use in the detailed build series on the channel.

@rudyrubalcava6876 Жыл бұрын

Do you do orders if someone wanted a complete built one?

@chrismustry9302 Жыл бұрын

Unfortunately, he does not have the time to do that. CrossKarts are his hobby, he has a family and a full-time job.

@michaelber9088 2 жыл бұрын

How to Build a Simple MX5 Chain Drive Differential - No Machining, No Welding thought you might like this idea for slip diff cart

@KJRaycing 2 жыл бұрын

Call me weird but I like live axles. More predictable and easier to get the rear end loose. That’s where all the fun is. Maybe if we actually start racing these in the US I’ll update to more race minded equipment. Thank you!

@saeeddj3424 Жыл бұрын

You didn't explain about how to install the engine or carburetor. isn't full version or ..?

@KJRaycing Жыл бұрын

There is an entire channel full of information. This is a very condensed version of the build. Details are in the individual videos 👍. Enjoy the build 🦾

@tobiaspimentacartcross6520 Жыл бұрын

Pow mano tem como dar uma cópia do projeto

@BG-gx3cf 2 жыл бұрын

Do I just follow the videos? Or is there some where I order the plans?

@KJRaycing 2 жыл бұрын

Check the description for all the details. But here is a link. Kj-raycing.dpdcart.com

@BG-gx3cf 2 жыл бұрын

@@KJRaycing I will definitely be saving for some of the plans and all the prices are included with the component list or it just varies from state to state?

@KJRaycing 2 жыл бұрын

I didn’t include prices because they fluctuate and I didn’t want to mislead anyone. But there are good descriptions, part numbers where applicable and where I usually buy the parts. I hope you can get in on the fun!

@BG-gx3cf 2 жыл бұрын

@@KJRaycing I will definitely be saving up thanks for helping people accomplish some small dreams of theirs

@cryptxx4671 8 ай бұрын

That is really cool do you sell these?

@KJRaycing 8 ай бұрын

Thank you and I do not, but there are lots of guys building them from the plans at kjraycing.com 👍

@josep.peruga 2 жыл бұрын

What is the cost of all the parts in your component list?

@KJRaycing 2 жыл бұрын

Check the cost breakdown video on the channel. Everyone sources parts differently so this is a tough question. And prices are always changing.

@zandertunes9602 Жыл бұрын

These look awesome . What was the total cost to build. I'd say somewhere around 4k

@KJRaycing Жыл бұрын

Thank you so much! I shoot for a budget of 5k. Sometimes it’s over and sometimes it’s under. I do split the builds into stages to help with the cost. Like working in the chassis while saving for the engine. I really hope you get the chance to build one 🖖

@zandertunes9602 Жыл бұрын

@@KJRaycing I will absolutely be building one. I've been looking into different engines to use. I would be ok with a little less power but I would still like to have the power to shred through the trails. Once I find my engine I'm going to use your plans as a base and modify them a little to be a little stretched . I will upload any changes to the plans so everyone can check them out along with pictures of my own build. Thank you for all the effort you've put into the community

@KJRaycing Жыл бұрын

Outstanding! It’s already in the plans how to stretch it and several guys including myself have stretched them 3-6”. If you think that is still too small there is the VF-1 XL that gives the driver 6 more inches in al directions. If you are shredding trails definitely go with an ATV engine that has reverse, tons of torque, speed and fun.

@serinob4996 Жыл бұрын

Hey boss how do I get your plans thanks Look awesome

@KJRaycing Жыл бұрын

Check the description for link to plans and other good stuff. 👍

@samuelborthwick8342 Жыл бұрын

do you sell complete frames?

@KJRaycing Жыл бұрын

I do not. I am working towards it but building a frame from a pile of tubing is very rewarding. I wish you the best.

@Nick_Dole 2 жыл бұрын

was that in north carolina?

@KJRaycing 2 жыл бұрын

Yes it was, Busco Beach

@johndavis8724 11 ай бұрын

I was jw could you fit a Hayabusa engine in there?

@KJRaycing 11 ай бұрын

Yes.

@freezeframe7202 9 ай бұрын

How much did it cost all together?

@KJRaycing 9 ай бұрын

Varies wildly, check the channel for the FAQ video for more info on cost and other things 👍

@heavycartmedia 6 ай бұрын

What about 4 seater?

@KJRaycing 6 ай бұрын

I think polaris has those pretty well covered 😁

@rileymilson2723 Жыл бұрын

Bros car came straight out of rocket league

@martinbacardi13 2 жыл бұрын

DOM tubing?

@KJRaycing 2 жыл бұрын

Yessir.

@tobiaspimentacartcross6520 Жыл бұрын

O meu e esse da foto Tobias pimenta 👍

@salvatorelivreri 3 ай бұрын

164 comments and no one mentioned that it would have been nicer to hear him speaking instead of the music.

@KJRaycing 2 ай бұрын

Different strokes for different folks… the videos where I’m explaining things don’t go over as well, I guess there are a lot of visual learners out there 😁

@salvatorelivreri 2 ай бұрын

@@KJRaycing to each his own! I too am a visual person, but without a lot of knowledge, I would have no idea what you were trying to accomplish with each movement unless you explained it. Hence, it was like an old fashioned silent movie, except with grating music. At least 80s music would have been better.

@KJRaycing 2 ай бұрын

Copyrights keep me from playing to good stuff. Thanks brother 👍

@CooksAcres Жыл бұрын

Anyone have a complete build cost video?

@KJRaycing Жыл бұрын

It is on this channel. It is a bit dated and prices have gone up 10-20% but it will definitely give you a good idea. I break my builds up into stages so I don’t have to buy everything up front.

@CooksAcres Жыл бұрын

@@KJRaycing sorry lol I had commented that before I watched all your videos. I started buying tools I need and can’t wait to get a build started. We Appreciate your hard work man

@KJRaycing Жыл бұрын

No worries, this is a question I get a lot. Seeing this and knowing it’s possible to build your own gets everyone excited. I can’t wait to see what you do with your own VF-1👍

@zakitiba2044 2 жыл бұрын

Please my dear friend, I am impressed by the wonderful design of this car. Can you send me the diagram with the actual dimensions and measurements

@KJRaycing 2 жыл бұрын

Do you want to build one?

@zakitiba2044 2 жыл бұрын

@@KJRaycing yes sir please

@KJRaycing 2 жыл бұрын

@@zakitiba2044 kj-raycing.dpdcart.com

@zakitiba2044 2 жыл бұрын

Can you send me the design with the real dimensions because I can't make it without the design from you

@KJRaycing 2 жыл бұрын

@@zakitiba2044 you have to get the plans to build it, sorry. Kj-raycing.dpdcart.com

@Tjkruse9889 2 ай бұрын

Did i just see u use a Yamaha yzf600r thundercat engine

@KJRaycing Ай бұрын

Well yeah; good midrange torque 👍

@Tjkruse9889 Ай бұрын

@@KJRaycing great engine rode my thunder cat for a month straight with no oil in her had no problems till the end of the month ask for to much blew my gears then found out i was running with no oil

@timothyrussell3323 6 ай бұрын

I make log mirror and my wife wood burns them..could we make a few of them for your family and make a trade?

@KJRaycing 6 ай бұрын

You could sell a $20k worth of log mirrors and buy one of my crosskarts, or you could build your own for a lot less. The hardest part is to start 👍

@chelusurfboardsglassing1243 Жыл бұрын

I always watch your videos they’re great pretty sure the other people already ask you can you sell me a rolling chassis I have a Suzuki 1000cc bike Thanks Chelu

@KJRaycing Жыл бұрын

Thanks man! You gotta get your hands dirty if you want one… you won’t regret building something from a pile of tube and an old bike. It is the coolest thing ever! Best of luck to you!

@timothyrussell3323 6 ай бұрын

How much you want for it??

@KJRaycing 6 ай бұрын

$20k, or you can build your own for a lot less. The hardest part is to start 👍

@SBGNewEra139 Жыл бұрын

Can I buy one

@KJRaycing Жыл бұрын

Cost to build so far is $2k- about $6k for mine. Getting someone to sell you something they’ve spent months of blood and sweat to build will cost you significantly more. You are welcome to make an offer on any of the ones I’ve built as long as it’s over $20k 😉. The hardest part is to start, I wish you the best 🦾