Add 2 solid ply wood 1/4 in thick with hinges for the back ply wood to open for back rest while the other covers the seating for a stronger seating area then add wheels to all legs. Make your own mattress or get a thick toper. When you open the bed to twin or king you can fold down the plywood after you slide the other out. I seen these they run from $350+ they can have drawers or trundles under the extended end. Thank You for the Blessing I couldn't afford it, but now I can build and I'm good at that.

finally! someone who explains things in a way i can understand!

Yes! Thank you for this tutorial! My mom owns the ikea version of this bed, and I've always loved it. 🥰 I don't necessarily have a small bedroom, at least for an older home, but it also isn't "big" by any stretch of the imagination. My previous [California king sized] bed used to take up most of the floor space in my room. Even though I loved it, I decided to downsize to something smaller about a year and a half ago. This bed looks fairly easy to build and would make a great compromise between floor space and a bigger bed.

Very Good Job, this one is the actual DIY Job, no carpentry methods followed, but looks good and OK. His girl Jess helping him a lot. I like it. And I liked her shocking expression at 06:07 Really its priceless, very natural, beatiful.... May almighty bless you both for ever with a happy life. Thank you for sharing the video.

This video is perfect! My husband and I want to build a custom trundle bed to fit the back of a cargo van and now I know exactly how to do it! ☺️

Thanks for your video. Yours is the best one I've found on the build and makes it simple for nincompoops like me to follow through. There is no way I'm gonna mess this up!

Thank you. Will do this with my oldest son, as I'd like a corner bed sofa in my flat. Your video, save me from trying to sketch it x

I just love how you troll the trolls. Thanks for making this video. I'm trying to design 2 chairs that lock together and can pull out into a day bed. This was really helpful💙

Love this day bed for my tiny house great idea peace an love

This is the simplest build and one I've been looking for. I'll build one for my fifth wheel. The only change I'd make in mine is the two outside slats would be pull outs, not screwed down. I think that would stop the falling in. Your build allows oodles of storage space underneath- fantastic. Mine will be built of reclaimed pallet wood (it's what I can afford). Thank you again.

Excellent job buddy, let me tell you that I am gonna build one of that one of those days. A big hug for you and your wife. From Tegucigalpa, Honduras, Central America.

I want to build a custom window day bed with this type of transition. Im excited about it.

I like the relax music and your cooperation.

Great video, thanks for sharing all that valuable info. I don't feel so overwhelmed about making my own daybed for my campervan reno now :) Cheers Guys!

sooo helpful thank you for making it so easy to understand

Probably not the best video on this subject but you get props for just getting out there and doing it! I'm sitting here still measuring and drawing.

LOVE THIS IDEA! I want to tweak it a little: make the pull out bed frame with foldable legs and wheels!

Well done! I might try that for my shack

Great work guys. You work well together. I'm currently building a Campervan down here in New Zealand. I'm going to use this design. Thank you for sharing 👍

Awesome job guys love it!!

Really bout to use ur exact design thanks!! U don’t need a million subs to help someone greatly. Keep doing what ur doing. I’m gonna subscribe for sure :)

Thank you for sharing. Going to try this myself now, your instruction and tips are great!

Nicely done! Perfect design for you guys. I'm going to build this and add some "plus size" support for me and my mastiffs! Hahaha! Thanks for the vid dude

Молодцы ребята! Очень полезный контент👍

This build is somewhat similar to the IKEA Hemnes daybed. There are online video guides on how to assemble it. The user manual with dimensions, parts list, assembly instructions is also online. IKEA does offer some of the assembly hardware as a separate purchase. I just dismantled my king waterbed but have kept the two 3-drawer units that supported the mattress. I'm considering using one or stack both of those drawer units for the trundle component of a daybed. I like that the Hemnes has vertical panels on 3 sides. I'm thinking I could use 30x80 hollow core interior doors instead, one for the backrest, another cut in half for either end. Since hollow doors aren't suitable for bearing any load, I plan to build a sturdy frame from 2x lumber as a "sleeve" for the trundle. The doors will then attach to the sturdy sleeve.

Thank you so much I have looking this for long time

Thanks for the video. Gives me a rough idea of how it is done.

Great ! I'm about to make my own !

Grest job! You make it look easy. I want to build one too.

I want to build this for my office but I would like to have drawers underneath for pillows and linens. Putting soap on the sliding rails for ready gliding.

Good job! Love the music too!!

Thank you soooooooo muuccccch for sharing this ! Really appreciate it ❤🙏

Love this video very helpful thanks.

Nice job. The section or part that pulls out "stands" on two front legs that don't have a cross piece like the other part of the bed. Why wouldn't you add a cross piece that would keep those two legs stable when it is pulled out? Couldn't see if that cross piece would sit on the floor but if not, maybe it being not quite as wide across the front of the bed would be okay or it could just go up off the floor an inch or so. To have a cross piece acting as another stabilizer would keep the bed from being too wonky on the pull-out action. You can take bees wax or a bar of soap & rub it along those wood slats which would make the pull-out action a bit easier too (in case the wood swells with the weather or you can always give it a spray paint shower). Thanks you two for a great video & reminding us to measure twice & cut once (which we saw when we realized how careful you were about your measurements).

Very,very good!!!Thank you from Brazil.

Just picked up wood working and may try this!!

nice job ,you could add a rail under pull out on each side end front to back to sandwich sliding section to stop pull out flip flop

Thanks for the idea❤

thanks for the idea

😊I loved this idea.

Love it

Thank you for sharing💙

It was a very informative video.

Awesome thanks so much for sharing ❤

Just my observation and opinion I would have put a brace down the sides so that when you pulled it out , they wouldn't collapse on you like that one did but you know to each its own I would have done it but I still love the concept

Nice work Good 👍

Good video. thanks. how long was the bed itself and how far out did it come? Did it fit 1 or 2 people?

Parabéns Ficou Linda Gostei

That's so nice project

Cool 😊

Lookd like didnt make runners? Stops it dropping. Also put a spacer under to stop friction so slides open with ease. Thats what i did to mine

Cool DIY.. hope it work out

Great and helpfull ..thanks..

Love Seat in a Box!

Все зрозуміло, молодець,ви великий фахівець

This is a very nice Thanks broo

Muito bom!!

Hello, very interesting and easy to make bed solution :) Is this still in use? Did anything break over the years? I think of sitting at one end in the middle will break the long 2x2 or something?

Can recommend his other video.."how to build a two day bed in two days!"

Thanks 😊👍

Absolutely love the visual video thank you so much. If I could suggest something it would be. Annie Sloan Clear Chalk Paint Wax. Or any namebrand. Chalk wax paint. Which would tremendously help the slide of the wood. I’ve used it on the bottom of old drawers to help them open and clos Easly and it Works great.

Thanks

Nice easy to do, measurements also super. But which one is 1", like to didn't show any wood measurement before or at the timing of sofa making. Reply us

I am going to build one two! Too* soon! 🙂

Nice thank you

Thanks a lot for that. how did you fix it (if you did!) inside the camper ? on the wall and floor ?

very nice and easy

Süpersiniz

nice.. keep in touch

That's good

Trying to find something for my tiny house combination sofa bed for 2

Thanks.

You are a brilliant

You need diagonals on each section unless you are covering the back and sides with plywood. Then you would only need them on the front slide out legs. It won't hold up without them.

Beautiful work! I like her shoes...who makes them?

Great Job! What did you use for a mattress?

I would just add a 2x2 horizontal piece at the bottom of the front bracing for stability.

Legs on the back of the pull out instead of that 'lock'. 2 x 1 slats and more of. You'll get serious matress sag. Good how to, thank you!

Hi, the measurement of the wood is ok, what about the sofa and the gap between the top layer of sofa's wood

Question, Are there daybeds that can be like real bed? Be able to a box spring and mattress?

Noche work guys... Very simple

Thank you so mach

Gracias x tu excelente

can we do the same in iron or wood is preferable ?

Would that be strong enough to put a box spring and spring mattress on it?

Hi can you tell me the exact messures from the wood. I cannot understand some. One

Thank you

Thank you this was so helpful!

Do you have a way to fix when it falls down during pullout? Mine does this and I hate it

thanks

I would decrease the width somewhat cause it will go in my van. but overall very good.

😍😍

What type of mattress do you use with this style pullout daybed?

It's better to have a strip of wood on top of the movable part, not bottom. Leaves you with a slight bump depending on how thick of a strip you use but at least it'll be much easier to close it back

رائع

I will build something similar but will have more braces. As in I and 250 pounds haha

Can you build additional framing ...like bookends

Indonesia ok

Estaría bueno q tenga patas el módulo que se desliza, aunque no se podría separar.

This should have a weight capacity warning... like an elevator! You guys did a great job and it looks gorgeous, but no way would my big behind try laying on it! #ThinPrivilege 😂