How to Build a DIY Travel Trailer - Aluminum Exterior and more (Part 2)

Рет қаралды 2,441,681

6 жыл бұрын

Part 2 of the How to build a DIY Travel Trailer Project. Adding the window framing, additional support structure, wheel wells, flooring, aluminum siding with VHB tape and more! ... oh yes, and I beef up the trailer tongue a bit too!
Please let me know if you have any questions :)
Joe
Big thanks to Industrial Metal Supply for partnering with me and supplying some of the steel for this project! Check them out online or one of their awesome stores!
www.industrialmetalsupply.com/
Note about the tape: The VHB tape I used for this project was CV62f and CV45F. It is very expensive, upwards of $100 per roll at most places I found. I ended up purchasing it from SRI-Supplies.com for about $50/per roll.. which was the best price I found anywhere. I paid full price and did not get a discount but just wanted to mention it in case anyone is looking for it and haven't found a good affordable source for it :)
If you guys like the videos I make and would like to help support the channel at no additional cost to you. Please consider doing some of you Amazon shopping through this link. I may receive a commission on some of the items you buy. Thanks for considering, it’s greatly appreciated ☺ amzn.to/2hWHbgu
Music sourced from the KZfaq audio library and from EpidemicSound.com... credits as follows....
ASound Foundation 1 by Gavin luke
A Sound Foundation 2 by Gavin Luke
Only If You're Ready by Happy Republc
via Epidemic Sound (license/subscription via partnership with Studio71)
Subscribe to homesteadonomics: bit.ly/2trs1Iz
Follow homesteadonomics: Facebook: / homesteadonomics Instagram: / homesteadonomics
Business Inquiries: kangaroojoe@msn.com
----------- DIY, Gardening, Outdoors, Home Economics, Preparedness, Permaculture, etc,.
If you have any questions or business inquires feel free to email below or if you prefer, you can send old fashioned mail to this address:)
Homesteadonomics
HC 70 Box 4770
Sahuarita AZ 85629
-----------
Tags:
homesteadonomics, homesteading, diy build, building projects, diy travel trailer, teardrop trailer, trailer, how to, mig welding, how to, homemade, VHB tape,

Пікірлер: 1 000

@homesteadonomics 5 жыл бұрын

For those interested in the Forney multiprocess welder I use, here is a link. Forney sells welders, plasma cutters and just about any other metal working tool you can imagine! bit.ly/2LjRRqH

@glitchinthesystem3702 5 жыл бұрын

homesteadonomics about how much do you think it would cost to build one of these?

@charliebrownau 5 жыл бұрын

Wow looks awesome Can you please provide a listing of all materials and lengths needed to build your projects without a paywall for everyone outside USA

@sigisfredoruiz7558 5 жыл бұрын

Me gusta lo que siste saves yo tanvien quiero aserme uno de lo mismo yo soy soldador ya

@artart7943 5 жыл бұрын

how many lights does a cargo trailer legally need?

@jacobj.1969 5 жыл бұрын

homesteadonomics What is the name of that sheeting metal you used for the sides & roof of the camper? I don't have the same metal shop supple place here in Florida panhandle. If I find anything like it ...I'm sure it will probably fall under a different brand or name.

@brianswanigan9891 6 жыл бұрын

Not bad for your 1st trailer build. Some tips from someone who was in the RV business for 20+ years. 1. If you are going to run water lines, gas lines, installing grey, sewage, and fresh water tanks, you will want to run those underneath your floor and then have them insulated, heated and self-contained (covered). A polyurethane bottom to enclose your plumbing will protect it from the elements, plus give you additional storage space. By placing your tanks above the floor removes a great deal of your living space. 2. Make sure you have room for your power converter, hot water heater, furnace inside the trailer. You can build those into your living areas. I would also consider framing for an air conditioner instead of a fan for the roof. You will be much more comfortable. 3. Make sure that you use windows that will allow you to have an additional escape in case of fire. If your door is blocked, you will still be able to get out. Good luck with your build, it looks great.

@W4ABN 4 жыл бұрын

Really wish that Industrial Metal Supply was on the East coast. Just the weekend hours alone would get good business. Really nice work on the trailer. Thanks for sharing.

@jewdd1989 4 ай бұрын

Watching this years later since you first posted and it never gets old! I miss your projects filmed in full because you just do a good job and have great ideas… anyways I really loved this, my Dad is nearly 70 and still plays hard by driving from KS to NM and anyways I had to watch this again because he’s looking for a cool teardrop trailer to stay in when on the road and I needed ideas. My personal favorite has been your workshop! I loved the first mitre station and then the cabinets you built! I don’t know why but I’m obsessed with storage and cabinets lol and how you built out this trailer is impressive even including a toilet and then much later when you built your pull out grill station!

@MrRamkulov 6 жыл бұрын

This trailer looks stronger than most of the trailers available on the market. Congratulations on the way for expanding your lovely family.

@homesteadonomics 6 жыл бұрын

I hope it will be... but as long as it's strong enough for our camping trips.. that'll be all the matters :)

@ToddLarsen 6 жыл бұрын

I've been patiently waiting for this Awesome update. You sir did not disappoint, the workarounds you came up with for bending the sheet metal was genius and thinking about the future adding things that may or may not get used was a great idea as doing it later would be a pain I'm thinking. I Can't wait for the next video. Thank you for sharing and as always Keep Building👍

@homesteadonomics 6 жыл бұрын

Thanks Todd! this has been a fun project... tiring but still a lot of fun... and those work arounds and future plannings are enjoyable to figure... most of the time that is ;)

@DanielinLaTuna 5 жыл бұрын

homesteadonomics, could you say which video starts this series? I came in on part 2, but am anxious to see the previous ones. I’m enjoying the other videos you’ve done, also.

@RIPbiker13 6 жыл бұрын

I cannot believe how nice this is turning out! Your channel is inspiring and I really enjoy the time you put into the videos you make as well as the incredible projects you come up with.

@homesteadonomics 6 жыл бұрын

Thanks RipB! I appreciate that a lot! Joe

@susansargies2043 5 жыл бұрын

after watching both videos, people disliked this because they are scared of work. I enjoyed this build. Thank you! It didn't matter to me the materials or what not you used,, it was your build and nobody else.. WTG awesome job. My bro loved it and is using it to build his. thank you again

@inspirationalpostbyleverso6263 4 жыл бұрын

Just bought a 1976 caravan and will be doing the same thing, you have inspired me, even tho some family members have taken the ....,but it will be a food trailer, I will be living my dreams as they go about there rat racing existence. Thank you for your advice.

@ourscamplife5210 6 жыл бұрын

Very Cool! Can't wait to see the finished project. We LOVE small campers!

@homesteadonomics 6 жыл бұрын

Thanks! I love those scamps!! so cool.... will go check you guys out!

@rmhtexas5982 6 жыл бұрын

Joe, been watching and commenting for a long time - this whole Homesteadonomics journey you're on is pretty legendary. Please keep it up.

@homesteadonomics 6 жыл бұрын

Thanks so much RMH! I always love seeing you comment and I appreciate your kind words too! In the social media world the kind people keep you going forward, even amidst the weirdos and trolls....lol :)

@snyder0513 2 жыл бұрын

Don-MN/ A note on return of trailer if stolen: Stick your return address label inside tail lights and side markers if possible. A Warden or Trooper sees a close match and signs of tampering and tongue ID missing can remove light covers and get your info from within ! We have 30-40 thousand dollar fish houses for Ice Fishing and Summer camping. Hurts to have one stolen. I believe it's harder to steal again with rebuilt knees ! Your videos are top line. Thanks, Don. PS, I'd put rebar inside angle iron top of lock; Disc would not reach through and rebar would rotate, for longer cutting time and sparks should draw attention or run his battery down !! Paranoid ? You bet.

@voneschenbachmusic 6 жыл бұрын

Can't believe the siding is just attached with sticky tape! Modern materials are amazing. Awesome project sir - looking forward to the next video.

@homesteadonomics 6 жыл бұрын

yes, it's crazy how just tape can hold it on... but some trailers have been using it for years with success... if for somereason it fails I figure I can always add screws or rivest later :)

@AbamAdy 6 жыл бұрын

is there anything you can't build?you're so talented and gifted

@clintcarpentier2424 6 жыл бұрын

+SAM Taylor And what's wrong with you?

@clintcarpentier2424 6 жыл бұрын

+ST Sometimes it's just a matter of doing it for yourself. You chose your man for some reason, don't knock his apathy, you married it. If you build something, and he helps, bonus.

@KMF3 6 жыл бұрын

Exactly what I was thinking.

@guljahonhasanova6446 4 жыл бұрын

Пароход тьсс

@dylanrap9778 5 жыл бұрын

I'm willing to bet that this trailer is better built than 99% of the factories that make them. Your build game is SOLID. Congrats on another subscriber!

@jamebrooke894 Жыл бұрын

Did that for years, worked for 2 big RV Companies. Weld dept, Chassis Prep, Floor Dept., and Rough Electrical. You did a great job!! Hahahaha Me personally, I'd never buy a RV most are junk. Everything except the Chassis and frames, is plastic and the wood used is kindling. But to build your own, YES!! YOU SIR ARE GOOD.

@Chris-ut6eq 5 ай бұрын

I like your use of wood supports, non-structurally to add support for windows and other points.

@BumbleBeeJunction 6 жыл бұрын

Looking good so far Joe.... You've done a really nice job with it !

@homesteadonomics 6 жыл бұрын

Thanks Mark!!

@johnkelley9877 6 жыл бұрын

I can see why it took a while to upload this video, there is a lot of work you did in a short time! I am impressed with how good it looks even with only the framing. Great job and I look forward to the next update.

@homesteadonomics 6 жыл бұрын

haha... yes, it went slow battling the wind and other little parts and pieces. but little by little it will make it... I can't wait to post a video of camping in it...haha!!

@troywelch7411 Жыл бұрын

That's going to be a solid trailer! Much better than factory built.

@jamesmoore3346 3 жыл бұрын

Dude, if the trailervmanufacturers built them the way youbdid this, theyvwould go out of business as their trailers would last forever.. You sir have 'mad skills' when it comes to metel fabricating. A most excellant build. OUTSTANDING!!!!

@greatlistener1731 6 жыл бұрын

It is really pleasure to see the trailer getting into shape... I was really eagerly waiting for this part 2 since I saw the part 1... It is nice to see you making those big projects so easily... Keep it up sir... Good wishes for the rest of the project... God bless you...

@homesteadonomics 6 жыл бұрын

Thanks Sounak! I'm really enjoying this build... albeit a tough one... but hopefully in the end I'll be rewarded with years of camping trips in it:) and God bless you too!

@laughsalot3992 4 жыл бұрын

Good Job! Hey maybe use the “pipe dream” as a way to take out compose from a toilet. Just a thought. Thank you for sharing! God bless you!

@Flashbax 3 жыл бұрын

Spending your time creating personal projects in a peaceful setting, what a wonderful way to live.

@davemetz7368 4 жыл бұрын

Thank you for taking the time to show all the details in your workmanship on this trailer. You did not rush anything and it was very well put together. I have learned from your patience. Great job !!

@scootersworkbench6347 6 жыл бұрын

Great progress! Love seeing the process and can't wait until the finished product! Good luck!

@homesteadonomics 6 жыл бұрын

thanks Scooter! I can't wait either!

@ZeroEntropy. 6 жыл бұрын

Wow, it's coming along nicely! Our summer heat has taken the steam out of me for sure, I hope you're hanging in there. I need to shift my schedule around to working on my projects at night cause 108 this week isn't for the faint of heart!

@homesteadonomics 6 жыл бұрын

Thanks! yes, this heat has really made working on this thing hard.... but I just wet down the hat and shirt and think about camping in it in the white mountains :)

@LuckyLucky-xp2sz 4 жыл бұрын

I am absolutely proud of you. Well done. I like the way you showed us how you went about it from the scratch.

@georgekhaziran 5 жыл бұрын

You are very talented and perfectionist and I like just watching and following your progress and steps . Thank you for taking the time and going through each step very delicately .

@tovaritchboy 6 жыл бұрын

Totally AMAZING! That is going to be a really sweet unit.

@homesteadonomics 6 жыл бұрын

thank you Greg! I'm sure hoping it will!

@hello456able 5 жыл бұрын

Amazing job we really appreciate you sharing learnt a lot!

@TrialAndError8713 Жыл бұрын

I'm sharing this series of videos with my husband. We have an older camper trailer that we want to dismantle and rebuild/modify, and you're doing a great job with this one.

@tbpc800 5 жыл бұрын

Joe this is the COOLEST project EVER! It's amazing to me. I'm so excited to watch every detail.

@MaryBrownForFreedom 6 жыл бұрын

Trick for VHB tape. If you ever need to remove something use a piece of fish line to saw behind the joint to remove it.

@homesteadonomics 6 жыл бұрын

that's a great idea mary! hopefully I won't have to use it... but good ti know!

@mambobond 6 жыл бұрын

Great progress Joe. Every project take longer than expected- you'll get there.

@homesteadonomics 6 жыл бұрын

haha... yes, they certainly do take longer... wish they didn't but so many things come up that you don't plan for at the start :)

@retiredtom1654 5 жыл бұрын

Impressive. Nice job with the welded frame and taped siding. Clean and roomy. Your family should enjoy this for many years.

@richardbinell2053 4 жыл бұрын

You are a patient, inventive, persistent man. Thank you for sharing.

@TJSWOODWORKINGSHOP 6 жыл бұрын

The only thing I can say is you are the man awesome project I like it :)

@homesteadonomics 6 жыл бұрын

Thanks TJ! Always appreciated sir!!!

@banjobenson9348 6 жыл бұрын

looking good, love those beads of weld

@homesteadonomics 6 жыл бұрын

thanks!!!

@peterandkodiak9762 2 жыл бұрын

I appreciate your ingenuity. Your knowledge of the types and availability of materials and their application, to include the use of power and non-power tools really shows your expertise. A+

@jackpegram422 5 жыл бұрын

You've got a solid strong camper, well built. Thanks awesome build.

@silvergrizzly316 6 жыл бұрын

Joe, I'm really in Awe....😲 sooo talented my friend!!! ~Jay.

@homesteadonomics 6 жыл бұрын

Thanks Jay! I appreciate it buddy! Joe

@IEnjoyCreatingVideos 6 жыл бұрын

The trailer is really looking good Joe! Thanks for sharing the video.😎👍JP

@homesteadonomics 6 жыл бұрын

thanks JP!!!

@IEnjoyCreatingVideos 6 жыл бұрын

You're very welcome Joe! 😎

@baikalwildfishing5701 6 жыл бұрын

Very cool!!! I look forward to the next video!!!

@homesteadonomics 6 жыл бұрын

Baikal Wild Fishing thanks! Btw...I just watched a documentary on lake baikal just last night...truly amazing! Very interesting place that I’d never really known much about. I’d bet your fishing adventures are pretty awesome! 😀

@baikalwildfishing5701 6 жыл бұрын

Welcome to Baikal!!! www.baikal-wild-fishing.ru

@markcobb6561 6 жыл бұрын

well thats slicker than a newborn baby. fantastic job so far. keep it up.

@homesteadonomics 6 жыл бұрын

Mark Cobb haha! Thanks mark!!!

@samrichards8251 6 жыл бұрын

Nice job! i would run a bead of sikaflex on the inside of the aluminium panels along the frame.. sure that tape is good but some extra strength wouldn't hurt especially because would be so simple to do

@homesteadonomics 6 жыл бұрын

I've heard some great things about sikaflex! lots of folks use it on teardrops and other campers with great success:)

@LogicBob 6 жыл бұрын

It looks sooo good Joe!

@homesteadonomics 6 жыл бұрын

Thanks Bob!

@kastenolsen9577 2 жыл бұрын

Use a thinned epoxy to saturate deep into the plywood and then a full strength coat to finish. Old boat builders trick.

@Llamadosalvaje 6 жыл бұрын

Wonderful ! Finally this video :)

@ZacJones 6 жыл бұрын

I’ve been waiting forever to watch this video Joe! Haha starting to really look like a trailer man awesome job! Excited for part 3, and can’t wait to see how you finish the inside up!

@homesteadonomics 6 жыл бұрын

Thanks Zach! Its' been a process to say the least... haha but the MDC shirt pushed me through to the finish line ;)

@henry_gregor 6 жыл бұрын

Melrose Design здесь другая тема! Иди в жопу!

@bob_atwestmi_fl_us7812 5 жыл бұрын

Very respectable job, for someone learning as you go you are learning fast. It looks to be build better then 100% of the RV industries builds on a daily basis.

@melindawilliams1529 5 жыл бұрын

Great job! I was concerned about all the weight on the framing, but you had it tied down thinking it could blow away. Just shows how little I know. Great engineering and creativity.

@ClimptonDiddlehopper 6 жыл бұрын

Just a tip for your floor. I used regular hardware and 3 years after it was rusted enough to break. I went and used some galvanized nuts and bolts I had left over from fencing my back yard and now no issues. When i refloored my car trailer i used them again where i could and they still look like they did 8 years ago now. I'm in the midwest so winter roads is one but parking around or on grass will rust the underside fast. Also run any trailer light wiring underneath to have access if a need arises.

@homesteadonomics 6 жыл бұрын

Yes, I probably should have done that now that you mention it... but we don't plan on traveling too much into cold areas during winter where salt it used... but now that you mention it I do kinda wish I would have done that...haha As for wiring that is the plan so far, and for the access that you mentioned...... but darn it.. you got me still thinking about switching those nuts and bolts out...lol ;)

@InventionPR 6 жыл бұрын

And if you do it, remember to add Thread lock in it.... lol

@OddLifeCrafting 6 жыл бұрын

It has been really cool to follow the progress of your trailer. I'm really curious about how you are going to build the internal walls finishing as we don't really know yet how we are going to do in our tiny shipping container house. Hopefully, you do it on time for us to learn and use this knowledge on our project. hehehe thanks a lot for sharing!😊

@homesteadonomics 6 жыл бұрын

Odd Life Crafting thanks! If you want, check out my shipping container shop build series...I added drywall/Sheetrock to the inside walls. And also, my shipping container playhouse project that I built for my daughter. I used plywood to make the interior walls on that build. I have about 3-4 videos on that one. Hope that helps and I’ll go check out your channel now😀👍

@OddLifeCrafting 6 жыл бұрын

I have seen all your shop videos but we plan to do on plywood. Your daughter’s tiny house videos I did watch some but I don’t remember watching the one about the plywood wall. i will definitely check it out!! Thanks a lot!! 😊😊

@homesteadonomics 6 жыл бұрын

Subbed you... great vids and great to hear from Brazil!! :)

@OddLifeCrafting 6 жыл бұрын

Thanks a lot!! For sure you have been a great inspiration for us!! 😊

@jfkusa123 6 жыл бұрын

Construction adhesive some 2x3s to the grooves in the walls and then you have studs to fasten to

@likeapro5496 6 жыл бұрын

Nice work. Great planning so far. An impressive job broken down into manageable steps!!

@jaydegelder2964 3 жыл бұрын

I've been watching you for the last few days and I'm amazed great job so far.

@paulangeli9710 6 жыл бұрын

Wow! That's really impressive. You have a rare talent. Subscribed!

@homesteadonomics 6 жыл бұрын

Thanks paul! and welcome to the channel! :) Joe

@dougwebb6193 6 жыл бұрын

You have some serious skills there, man!

@homesteadonomics 6 жыл бұрын

thanks Doug!

@dtcjeep 6 жыл бұрын

I bought a tiny 5' X 8' barely used carson enclosed trailer. I made it into a tiny off road camper with a couch bed...it was a fraction of the price of a moby 1. So one thing I forgot to do at the stage you left this video at is adding backing for a grab handlebar the door. And another thing, get a roof fan with a thermostat. You will love it... when it gets really chilly it will automatically turn off. Or if it's summer you can have it kick on above say, 90 degrees. So finally add a couple wall mounted marine fans, if you just need a breeze. Lots of led lights. Looking good!

@mysteriomarvel933 3 жыл бұрын

Wow...so far I am very impressed with your craftsmanship and thoughtful engineering plan/design. Sadly this is becoming a long lost art in America. Kudos and congrats for reminding us all what we are still capable of achieving when we are properly motivated.

@joeyhazlett 6 жыл бұрын

Joe, I recommend fabricating some kind of plate and welding that to the tongue instead of welding that jack directly to the frame. In my experience, those A-frame tongue jacks get destroyed pretty easily, and for stupid reasons, and it will make sense to be able to just unbolt the old one and bolt on a new one.

@homesteadonomics 6 жыл бұрын

yes, that is seemingly the best idea... you and several others have mentioned it and it makes total sense.... already looking at my scrap pile right now for pieces that I can make into a mounting plate :)

@Chester41585 6 жыл бұрын

This is probably the most bullet-proof tow-behind I've ever seen.

@homesteadonomics 6 жыл бұрын

thanks Edmund! it's still got a long way to go but little by little it'll get there :)

@zehnsechz 6 жыл бұрын

be sure to thank everyone that has taught and supported your learning because you are an incredibly useful man. great video

@homesteadonomics 6 жыл бұрын

zehnsechz thanks! Yes I am appreciative of my parents and everyone that has contributed to my upbringing😀👍

@pokesmotlots 4 жыл бұрын

Your craftsmanship is seriously admirable. I hope i can someday have the creativity and skills that you have.

@Llamadosalvaje 6 жыл бұрын

Nice work bro!

@homesteadonomics 6 жыл бұрын

Thanks PC!

@davidbradley3074 5 жыл бұрын

Remember to build triangles for the best of strength in your structure.

@GrantRTanner 6 жыл бұрын

Yaaaas! I'm definitely following this build. I love it! Smart use of vhb tape. At 10:12 my perfectionism caught the seem height difference. It makes sense now that you'll cover all the seems with a trim anyways. What great work! I love this. Thank you!

@homesteadonomics 6 жыл бұрын

haha... yes, that bothered me too... but I opted for that versus vertical stacking at the reduction of visible seams once the painted stripe is on :)

@jrogs15 3 жыл бұрын

@@homesteadonomics how is the tape holding up? Did you put any screws after taping?

@mahdihosseini1952 6 жыл бұрын

I am from Iran and I always follow your clips and wait for Part 3. thank you

@homesteadonomics 6 жыл бұрын

Mahdi Hosseini thanks for checking it out Mahdi! And great to hear from Iran 🇮🇷😀👍

@RobinLewisMakes 6 жыл бұрын

Looking good, the white aluminium is sharp! Really interested to see how the tape holds up. Every part of me is disagreeing with it but if it's been used commercially then you can't really argue

@MaryBrownForFreedom 6 жыл бұрын

We used VHB to repair a friends camper roof. Tree had punched a hole in it. Cleaned down to bare aluminum, made a nice looking patch, used the tape then some camper seal caulk(stuff is way different than normal caulk) and it has lasted 5 years of MN weather so far. Hard to see the patch because his roof has that rubberized roof coating stuff on it and it got a whole new coat to keep other seams from leaking...

@homesteadonomics 6 жыл бұрын

Thanks Robin! its crazy to think about but it's got a great track record... worse comes to worse I can always add rivets later :) btw... I hope you are getting some good two hour stints of sleep through the night ;) gets easier after the first 3 months!

@MattOGormanSmith 6 жыл бұрын

If you add rivets later, don't forget to put plastic top hat washers under them so you don't electrically connect the steel to the aluminium, or else you'll get galvanic corrosion. That's an advantage to that tape that you didn't mention.

@dorvinion 5 жыл бұрын

As long as the surface prep was done correctly (which he did) the VHB tape should actually provide a stronger bond than rivets. It has the benefit of being more flexible than rivets and providing some protection against water intrusion along the seam.

@husseinchikakuda7031 5 жыл бұрын

But I dont know the name of the tape that was used to hold up aluminium

@ARepublicIfYouCanKeepIt 6 жыл бұрын

You should be happy with the progress thus far. You're doing an awesome job on the trailer. I envy your metal working skills. Have you ever thought of holding meetups to introduce metal working/welding to the DIY community that follows you?

@homesteadonomics 6 жыл бұрын

thanks John! I am happy with it... just wish I had a couple weeks of the windy weather back and turned into more progress... hoping to have it ready by August ;) as for meetups, I've definitely thought about it. The issue is where/when,etc,.... the wife doesn't really want anything at home for obvious reasons. but perhaps maybe something at an IMS might be something I could look into... not sure, but I will think about it!

@MrScoresby 6 жыл бұрын

Maybe a deal could be made with your neighbour to use his new shop seminar center. the old guy Bert

@gsansoucie 4 жыл бұрын

Guess I should have waited to ask my question about prepping the steel with printer/paint until this video. Question answered. This is incredible.

@ward26102 6 жыл бұрын

Once again, terrific work and craftsmanship., Joe!

@caramoonlynn 6 жыл бұрын

Ohhh! I'm going to share this with a friend Who built a camper trailer. He's refitting the floor plan, so maybe he can get some ideas from you?

@homesteadonomics 6 жыл бұрын

Thanks Cara! I'm still trying to figure my own floor plan...lol

@ROMAJAN33 5 жыл бұрын

Я хоть и не понимаю по английский язык но видео понравилось, у нас говорят « золотые руки »👍

@trojrox1202 4 жыл бұрын

The hole project is amazing! I didn't see something like that ever

@icarrrv 5 жыл бұрын

Lovely work can't wait to see the final product

@bobferranti5222 6 жыл бұрын

I'm curious to see how much it will weigh once it is finished, dont weld the jack, weld a plate and then bolt the jack to the plate. I had to replace a jack that was welded and it was a pain in the butt, I bolted the new jack in so it will be easier to replace if it breaks again. Use tubing to run all your electrical wiring in case you have to modify or replace it in the future.

@homesteadonomics 6 жыл бұрын

I'm shooting for low 2k range in weight. It's not going to be a light trailer but I'll be happy if it ends up around the 2100-2250 range. as for the jack, yes I do like the idea of being able to replace the jack so I'm definitely leaning towards adding a piece of steel and bolting.... you and a couple others mentioned that and makes total sense :D

@TheVoice010 5 жыл бұрын

What's the thickness of the Alluminum panels?...24 guage, 18 guage?

@philfortner1805 4 жыл бұрын

Congratulations on the beautiful trailer build! Going to build one myself. I spotted just one problem where the steel and aluminum are not electrically separated. This will cause galvanic corrosion at the contact points and rust out the steel. It's simple to fix by using plastic washers or adding plywood in between. Awesome build man!

@tibby24 2 жыл бұрын

Laying dimes down! Nice welds!

@lanceroark6386 6 жыл бұрын

Sweet.

@homesteadonomics 6 жыл бұрын

thanks!

@jackpatteeuw9244 6 жыл бұрын

I am very interested in seeing exactly how you going to seal the seams especially the corners.

@homesteadonomics 6 жыл бұрын

it will be mostly seam-seal tape and butyl tape.. and then on the overlaps where the void is larger I will use some levelling sealant to 'flow' into the void area. hope that made sense:)

@jackpatteeuw9244 6 жыл бұрын

Do you plan on using any sealant/tape on the vertical panel seams ? Just my 2¢, but I would have made the front about 1"-2" taller to guarantee that rain flows off the roof.

@bosanningthoujam8720 3 жыл бұрын

@@homesteadonomics 👍

@bosanningthoujam8720 3 жыл бұрын

@@homesteadonomics h

@bosanningthoujam8720 3 жыл бұрын

@@homesteadonomics 👍

@BruceAUlrich 6 жыл бұрын

It is coming right along, Joe! Nice job!

@alexvinicius4305 6 жыл бұрын

Im so into that, Leaving in Brazil and only finding very expensive trailers, and not really have any in the way I want. Praying that I will be bold enough to start try this when I comeback from tour. You are amazing!!!

@Stevey_B 6 жыл бұрын

Outstanding! Subscribed !

@homesteadonomics 6 жыл бұрын

thanks Stevey!

@nurettinhacat1627 5 жыл бұрын

Hamur8i

@zerocool2352 6 жыл бұрын

I had some initial doubts that this thing would be a giant steel monstrosity, but it's turning out fantastic with some really clever design patterns. Can't wait to see what you have in store for us next.

@LovingArmywife9 5 жыл бұрын

I can't stop watching these. Idk why but I find these videos so interesting. Subscribed!!🤗

@BagemRuStudio-Trailers 5 жыл бұрын

*Красавец! На работу принимаешь?!))*

@007darryl 6 жыл бұрын

Are you going to add leveling jackets? If so, will they be manual or electric?

@homesteadonomics 6 жыл бұрын

Hi Darryl, Yes, I'll be adding some stabilizer jacks... manual most likely. I'm still deciding between some flip down jacks and aluminum A frame style ones. the flip down ones look really cool but the a frame ones seem more reliable... decisions decisions... LOL :)

@calisdad3 6 жыл бұрын

You're really rocking it. Thanks for sharing.

@jasonc9677 6 жыл бұрын

Awesome to see u put some thought into it sealing all the wood I'm rebuilding a slide in truck camper all the wood was rotted out because nothing was sealed it is now every piece all sides awesome trailer much better built then any thing u can buy

@homesteadonomics 6 жыл бұрын

Yes, I've seen a lot of rebuilds online showing the rotted out wood and I'm trying to do all that before hand in hopes of saving problems down the road :)

@campingincolorado6432 6 жыл бұрын

I would recommend that you bolt on the trailer jack.

@MaryBrownForFreedom 6 жыл бұрын

Yup! First time you hit a rock or a steep driveway and fold it back you will be swearing at having to grind welds!

@theorgelmeisterakathesoapm8589 6 жыл бұрын

Mighty daggone amazing, Joe!! Will you have any red tape or hoops to jump through to make it street legal?

@homesteadonomics 6 жыл бұрын

Thanks! as far as making it licensed.. I won't go into any of that on the videos but I don't anticipate much of a problem. Most states have details of what you need to have done for that.... but it varies greatly from state to state