How to build a FAST power wheel

Рет қаралды 7,842

8 ай бұрын

Building a super fast power wheel to compete in our outlaw class. This is a basic run down of how to get started and be competitive in the class. I’m sure there is plenty of other ways to go about it but we have done numerous testing and believe this is the fastest/safest setup currently. We are always working and looking for ways to improve and gain more speed safely out of these cars. These kids have a lot of experience behind the wheel, they have some serious talent!
Check us out on Facebook at @oxford power wheels racing
PARTS NEEDED:
Programmable electronic speed controller
(Make sure you select 200amp 48v option)
-kellycontroller.com/shop/kds/
-real time throttle/pedal
a.co/d/aKOdi8s
-7r powerwheel gear box
Or ML toys offers a upgraded 7r gearbox with a lot stronger housing than your factory power wheel box
-www.mltoys.com/product-p/phoe...
-10 guage wire
-100 amp circuit breaker
-bigger 775 motors
Andy redlines work well
-www.andymark.com/products/and...
ML TOYS also offers a performance 775 motor
-www.mltoys.com/product-p/matc...
(You also need bigger screws for the 775 motors)
-metal pinions
Make sure you get 5MM 32PITCH and the correct size to your gear box , for example 5mm 32 pitch , 23T Pinion
-www.amainhobbies.com/hot-raci...
-factory shifter switch
-SLA, lithium or LIPO batteries
-if you have any questions or need any help feel free to shoot us a message!
Thanks for watching , hope to see alot more outlaw cars out there!!!
#sendit #modifiedpowerwheels #dragrace #automobile #racing #drift #1320video #car #music #race #eatsleeprace #fastkidsclub #stephensharer #sharerghini #oxfordpowerwheelsracing #farmtruck #streetoutlaws #moddedpowerwheel #powerwheels #powerwheel

Пікірлер: 44

@matthewhallam8079 6 ай бұрын

You should open a shop i would pay to have one of these made for me as I'm not so hands on like yourself and there isn't anyone doing it

@TrevorsFastLife 6 ай бұрын

Shoot me a message on instagram man @Teter_built I can take care of you

@briannae6306 Ай бұрын

Do you have a tutorial how you built your fast kids light to start racing??

@user-ye9gl5uy9t 4 ай бұрын

What wires are you jumping to the motor?

@fakiecompany 8 ай бұрын

👏👏👏

@audiwankenobi361 5 ай бұрын

I find Powerwheels and Razor stuff all the time on my route. My newest and most challenging find is a Powerwheels Wild Thing. Can you get one,replace all the electronics and make a video so i can copy it? Pretty Please.....with cherries on top? Hahaha! Seriously,im lost on how to get the existing hand controls to work with a adjustable speed controller. Can you offer any advice? I will look through your channel in the meantime. Thanks.

@TrevorsFastLife 5 ай бұрын

I do have one of those wild things, same condition it doesn’t work lol but we never messed with it, if I get some time this week I’ll play around with it and make a video man!

@Sirfuzzybunz 6 ай бұрын

Can you tell me how many volts you are putting to those redline motors? Are you able to run them successfully on 46v

@TrevorsFastLife 6 ай бұрын

We are running 7S Lipo, about 31 volts, we have pushed them on 8S, and 40v lithium but they do not like anymore than that

@wallyedenfield6917 2 ай бұрын

Is that a first gear delete on the lambo?

@TrevorsFastLife 2 ай бұрын

Yes!

@healfitness 3 ай бұрын

where do you get the motors and how do you find the right gear. I couldn't find out how to match a new motor to the gear box

@TrevorsFastLife 3 ай бұрын

We use vex robotic 775 motors you can find them online , the gear boxes have numbers labeled on the back that tell you the correct pinion size

@gregoryamerica5618 3 ай бұрын

What is the suggested run time on those lipo batteries for motor longevity?

@TrevorsFastLife 3 ай бұрын

It depends what size lipo you are running, but if using the lipos I would recommend using it for drag racing only , it’s a hit or miss on the motors any more than that, but for just straight line racing , they hold up well on 6-8s

@johnhouse7376 8 ай бұрын

Just watched your video and this is great information. In your list of items you mentioned a 100 Amp circuit breaker. Is there a particular one that you recommend or can you send a photo of one you use?

@TrevorsFastLife 8 ай бұрын

This is the one I used! a.co/d/0vDYI5r Realistically any one will work though , and your local parts store should have them in stock

@johnhouse7376 8 ай бұрын

Thank you. That's what I was thinking but just wanted the confirmation. Appreciate the information. I hope to have my daughters Mustang running as fast as what you all are.

@TrevorsFastLife 8 ай бұрын

@@johnhouse7376 no problem at all! Goodluck to you! We hope to see her ripping soon🚀🚀

@johnhouse7376 6 ай бұрын

Hi Alex. I watched your video on KZfaq and I also message through KZfaq. I have purchased the items that you had mentioned in the video.. 10 AWG silicon wire,Kelly controller,variable gas pedal, 775 recline motors with 19T pinion gear(I have a Mustang), and a key to start the car. I am new to the whole P/W thing and not real good with electrical(but learning). I thought I had everything wired correctly but when I turn the key and press the pedal, I get nothing. I was wondering if you could list every part I would need and you could provide a wire diagram of the wiring system. Do I need relays for this to work? I also want to add a step down convertor for the lights and will be running lithium ion batteries so I will also be using a low voltage cut-off. I would really appreciate your help as I am completely confused. I will also be running 36V. Thank you for your time and help.

@TrevorsFastLife 6 ай бұрын

@@johnhouse7376 sorry man I didn’t see your message , do you have a key wired up (on/off) switch or atleast the key wire jumpered straight to + , you have to make sure it’s on or you won’t get anything , you also sometimes have to plug the rs302 cable into the controller and program it on your laptop to your voltage settings ,

@danielcortes700 6 ай бұрын

Hey I need to remove my pin 10 tooth off the 550 to install on a 775 motor how donu do that ?

@TrevorsFastLife 6 ай бұрын

550 pinion shaft is a different size than a 775 , the shaft on the 775 is 5mm, you’ll need to order 32 pitch 5mm 10tooth pinion

@wipsomass 5 ай бұрын

Are you running brakes? Looks like the Kelly controller doesn't support motor breaking

@TrevorsFastLife 5 ай бұрын

The Kelly controller does have a “brake” connector off of it but we don’t have brakes on this one currently . You can get resistors and wire them online with the motors so that they motor break when the gas is released

@MrMckenzie2403 7 ай бұрын

Okay, back again, i was about to place a order on the controller. It's asking for a connector type. Should i just run with the compact? Seem like a lot of connectors vs what you ended up with.

@TrevorsFastLife 7 ай бұрын

Select 48v 200amp option and use the first option for the connector ! It should be a 2 plug connector

@Sirfuzzybunz 6 ай бұрын

I am seeing the same thing. @mrmckenzie2403. What did you end up doing

@MrMckenzie2403 6 ай бұрын

@Sirfuzzybunz apologies im just seeing this. Went with the first set of connectors looking at it like the left is the first choice.

@TrevorsFastLife 6 ай бұрын

@@Sirfuzzybunz it should be the 2 plug connector and you’ll cut the plug Off , and use the wires, you can shoot me a message on Instagram @Teter_built I can send you a picture of a wiring diagram

@ghchaser84williamcol64 8 ай бұрын

Thanks for the information Alex. Hope to be running closer to you guys someday.

@TrevorsFastLife 8 ай бұрын

Hope to see your kiddos out racing!!

@jdcravings91 4 ай бұрын

I have a red corvette i need to change motors for. I was wondering how to know what pinion size I need to buy, I also wanted to know if the speed controller is necessary since it is very pricey

@TrevorsFastLife 4 ай бұрын

You count the teeth on the precious pinion to tell you where you are at , if you do a first gear delete it’s just a big trial and error with pinion size depending wheel size and weight ESC isn’t necessary, but will make it fast only two ways to make these fast ESC and a heavy duty golf cart solenoid

@jdcravings91 4 ай бұрын

@@TrevorsFastLife sounds good, now i have a bunch of 18v batteries, i rather not buy new ones, will they be ok with the andymark 775?

@jdcravings91 4 ай бұрын

@@TrevorsFastLife Also, does the circuit breaker make the 30amp fuze that comes with the battery converter unecessary?

@TrevorsFastLife 4 ай бұрын

@@jdcravings91 yeah you can do away with that 30 amp And just run a 100 amp circuit breaker The Andy’s will be fine on 18v they really wake up on 24v

@user-ye9gl5uy9t 5 ай бұрын

How many batteries do you run in your car

@TrevorsFastLife 5 ай бұрын

We run 7s-8s , the motors stay together forever on 7s , they don’t last as long on 8s but you squeeze a few more 1/10ths out