Love this video! That road with the incline for the cars to go down is so sick!

Could you hide the wrong car in the City?

Everything is on point in this video, well done! The Audi MOC looks great! I also have to notice that sometimes 6 studs are not enough for advanced detalization, so I build 7 studs wide cars.

These tips are good tips but also things like proportions and shaping is some of the most important factors of a car. For that car to look like that car. And using more complex and different pieces can offer more detail and shaping. Adding onto this using different tires besides the city wheels for sport cars like the speed champion ones would offer a more low profile and sleek look to the model. Also using different fenders to give a car a more modern or classic look can add a lot.

Tip: look at “how to draw cars” books or online tutorials. It’ll help with spacing between front and back wheels, 2 or 3 box designs and offer some inspiration for rear, front and side detail work. 👌

Very entertaining video! Cars seem pretty hard even at their generally small scale. The proportions were always tricky for me to get right.

Yay finally! I was waiting for this video for so long.

Personally disagree on the 4 wide and preformed chassis comments, I've made some of my favorite car mocs by constricting myself to those chassis and small size, it forced me to think of other elements more creatively. The preformed chassis also allow minifigs to sit lower than what is possible with plates so that full figs can fit in without the car scraping the ground.

I'll always prefer 6 studs wide, 8 studs are simply too big in my opinion, you can put a lot of detail yes, but the cars will be simply too big for minifigs I think, 6 studs is the best balance between scale and detail

I have decided to take the plunge and try my hand at city building, thanks for the inspiration and information. I enjoy your channel immensely. I've just begun my city building journey, and I am struggling to justify 6-wide at the moment. The scale looks odd in context of what few roads and buildings I have. 4-wide allows me to add density of units and flow of movement at eye level without drowning out detail of surrounding scenes. I must admit, the "minimalist-cutesy" aesthetic that 4-wide lends itself to has grown on me. The lower brick count of my 4-wides is also helpful as I slowly accumulate more into my collection. At least those are my justifications.

awesome cars they look amazing

Nice! Thanks!

Thx, for the Tipps and Tricks 👍 This helps Most of the Car builders.

Insane city! Cool cars too!

The black classic car looks so cool!

Beautiful!

All very useful tips 👍🏽 I used once the minifigure head as a passenger in the backseat

as a creator who makes LEGO cars, I made these mistakes sooooo much, so thanks for touching base on it!

As always amazing and instructive video 😍

everything looks so slick nice job

3:03 I love that car design!

thanks for helping me!

these are some good tips thanks for sharing

1:36 u can push it out whit something skiny like a pole underneath

Makes me want to revisit some old Lego sets

Brilliant VIdeo. Some excellent advice. Cheers

How to build lego car: Step 1: frame Step 2: add wheels Step 3: profit

would be amazing to see some longer vids of your building.. 30 mins + :)

The pieces created by lego are actually quite fun to be honest

What a brilliant video! Thank 👊

Thanks for that great ideas! :)

It's really cool tips!

Good video thanks

I love your vids

I remember "Escape From Privet Drive" came with a six-wide car. My solution to make two people fit was to have all of their arms forward... not sure why it worked, but it did!

Thank you😁👍👍👍

Cool dude!! Bro you can build anything!!

Excellent video!

All those poor traumatized figures, seeing a driving head

Good job👍

it helped me thx

please upload an instruction for this g-class, its amazing

Die G-Klasse ist richtig top gemacht! Weiter so 👍

Sometimes it is easier to put 2 minifigs together if you lean one of them slightly forwards and the other backwards. Great vehicles - I will copy TD's building technique!

i make speed champions sized cars (8 wide) and you can fit way more detail so i recommend sometime you try making 8 stud wide cars, also the base plate for 8 stud wide speed champions is actually good

Can you please do a tutorial on how to make the white car please

My car was the first picture when I built my first but now I built car porsche when I looked at this video (and got experience with lego) good video 👍

I would like to see u build some jdm cars

looks like someone publishes their videos like me also in 2am :D nice tutorial, I like those illegal techniques, that hood is awesome :)

Lol, funny! Great cars also 👌🏾

Bro level 1 in the thumbnail looking better then any car I could build in Lego from imagination

lego city was a peaceful place, until its citizens discovered they couldnt steer their cars while driving down a hill at high speed...

Good video it help me make a car

I prefer 6× cars for my city, jumpers and plates make it easy enough to fit 2 ppl per car. Just finished an awesome supercar/cyberpunk stule car. No problem fitting 2 figs inside

Great video, great tips. Though, the thumbnail did make believe I was going to watch a video from TD Bricks.

A car has mental breakdown in lego city. Start with new rescue tow truck. Hey!!

The video was very nice, Your video style reminded me a litle bit of Tiago Cataroni

Hey good vid! Was wondering how do you make your roads especially the one with the incline?

Good job in the vid

Great video

This video was indeed entertaining.

i normally use 6 stud wide cars especially since im planning on building new cars based on the 2019 police patrol car

I need to build four stud wide cars because I made a four stud wide Lego train , but it's not that bad you can still put a decent amount of detail on four stud wide cars

Really nice advices, but moving on to serious thing.... How did you make the inclined road so PERFECTLY, it's wonderful, pls teach me

I created my own SUV by some of these techniques, pretty good

I don't like open stoods on anything i build, i always cover stoods with tiles, but when I can place tiles and it's better not to place them, I don't place them (yeah I know that sounds weird)

I like lego so much

I do the last tip a lot. On the current police car set I changed the hood of the car the not have the super charger intake.

Nice

so cool so cool so cool so cool so cool so cool

He shows the bad car. My thinking "That looks better than my cars".

Bro i thought ur r8 was a chiron and it looks amazing

thx

This is so useful since I’m trash at building cars!

I’d say cars are my biggest weakness as a builder, thank you

Time to build Lego cars 😁

Yessir the my fav car is there the Audi to etron

I made my speed champion Ferrari have a aftermarket rear body ,custom exaust and different spoiler

Since you had difference scale trees for the "background" of your city, have you also built sub-minifigscale cars to be in the background?

Just wow

and of course g-wagen crashes first, blockin road to others, resulting in mass crash. thats just tradition of this beautyful kind of workshops cx

This my reason why i use lego design by cars firstly i cannot have the pieces to build the chasy and second its more easy to build on the lego car chasis making it more easy and rhe mocs more cooler design

nice video

I kinda used the trick of modifying cars before watching this video I lowered the suspension of a monster truck Made a pickup look more buff And turned a police car into a street racer car or smt

Your the best

You Have Alot Lego Your Videos Are Really Awesome And Mind blowing Let's Just Appreciate The Fact These Videos Are Too High Budget

Unpopular opinion here, but I somehow like 5 studs wide lego car models. That means that the 2x2 plates modified, which are responsible to connect the wheels, are attached using two jumper plates each and I like to use inverted brackets in the center to add more details to the sides/to the doors. It is always a fun challenge, the models are nice to display and I do not care about minifigure compatibility. Still a great video if I consider building something suiting to a City/to minifigures.

I will never build a car that cannot fit a whole minifigure. That is a personal limitation that I have set on myself because I am a weirdo that is more concerned with building a functional world then with details alone. Everything else in this video is really solid advice. If I may add another point, not really a technique but more so a mindset, but when looking for inspiration for building a Lego car, only rarely look at other people's cars. When looking for inspiration, look at totally unrelated builds like modern space ships or natural builds like animals or large human figures as those builds tend to have a larger focus on interesting curves and connections, then apply that knowledge to your car builds. I actually got inspired to finish a build of a Ferrari Dino 206 GT by looking at somebody's build of a pufferfish. Inspiration for individual techniques rarely come from pouring over people's interpretations of similar builds.

Can you do a tutorial on your audi r8

nice

A man has been vaporized in Lego city

Basse plate of Lego car is good To not break or if you not like it. Then. Build Lego car without base plate with glue!

For me the best proportion are 4 wide for cars an 6 wide for trucks

Cool

Could you do a tutorial of the g wagen

Make a swat car or a military tank

Kan you please try to do a minifig scaled ferrari enzo or mercedes clk gtr amg 1997 Or some other ferrari?

Lego 2K Drive is out!! We NEED these builds! Instructions please.

That Blue Audi looks really nice and looks like something LEGO would do as a Speed Champions set 👍!

I don't know much about Lego but are you sure you can't make the front shorter on the R8? It's got front overhang lvl Testarossa.