How to Build a Mini Ramp

  Рет қаралды 48,067

NZ Builder // Josh Chapman

NZ Builder // Josh Chapman

2 жыл бұрын

In this video, we walk through how I built my mini ramp from start to finish. I considered buying one but I found it cheaper to do it myself. Watch as I explain my method and breakdown step by step the DIY mini ramp build.
If you like this kind of content please consider subscribing!

Пікірлер: 73
@HvacWizard
@HvacWizard 7 ай бұрын
Sick build! Wish i had one when i was 15, 20 years later maybe ill build one this summer. Thanks for the inspiration brother!
@daveasaurusrex5091
@daveasaurusrex5091 2 жыл бұрын
Awesome mate, I always wanted to build one. Now I'm going have to give it a go. It's cool to see you worked out the transition to 6ft as most skatepark designers overlook this and it makes it hard to skate if you dont. You probably have the best mini ramp in the valley. Great video
@nzbuilder
@nzbuilder 2 жыл бұрын
glad you enjoyed it :)
@chriskunce3331
@chriskunce3331 2 жыл бұрын
Perfect timing for this video. I’m was just looking yesterday for plans for and 8’ wide, 2-3’ high mini ramp for my garage. Most plans have an 8’ flat section, but I was wondering if 4’ would work since I have limited space. Looks like it would be perfect for a small ramp to learn lip tricks. 👍
@nzbuilder
@nzbuilder 2 жыл бұрын
Glad I could help!
@razioli844
@razioli844 6 ай бұрын
how'd you go with the 4' flat section?
@Joestacemazjojo
@Joestacemazjojo Ай бұрын
Awesome video. I’m in about same position. Finally have the space only I’ll probably break a bone but would love to get my littles on it and try myself a bit. Never forget that feeling! Cost is my only concern. Found it thanks!! Good job Dad , and help!!!!
@jim4707
@jim4707 Жыл бұрын
Stumbled on this video as about to do exactly the same at home, with similar dimensions. I have about 16' (4.8m) depth/length to play with, but will alter the depth of the platforms if needed. Main goal is to make sure there's enough flat so that's not too whippy. Yours looks like it works well, how much space did you have been the fence and the wall? Cheers
@UlfAslak
@UlfAslak 6 ай бұрын
Looks fun! The drop is not very steep, so for anyone used to skating a regular mini of similar height, this is going to feel a lot like dropping into a bank. As a life long skateboarder (~20 years) I would suggest elongating the flat part (maybe 0.5-2 meters or so) to get a slightly steeper transition.
@Daniel-fo2qf
@Daniel-fo2qf 2 жыл бұрын
Cool ramp mate. I built a similar one in my parents back yard when I was 16. Had hours of fun and learnt a lot building and skating it. Must have drove the neighbours nuts with the noise from it. Only problem is the climate in NZ being rather wet during the winter. Takes days for the ramp to dry out and when it does eventually the ply gets really slow. I hope to build one again one day but this time I'm going to make it out of concrete.
@nzbuilder
@nzbuilder 2 жыл бұрын
Yeah I am worried about this, I'm thinking of painting it and covering with a tarp through winter
@AfterEleveIV
@AfterEleveIV 2 жыл бұрын
Hey Josh, I saw that your top support under the copping was mostly knotted and will break eventually if someone is distastering often in the center. I'd brace it a bit with some studs for longevity. Sick mini bro
@nzbuilder
@nzbuilder 2 жыл бұрын
Cheers for the tip
@BEAN-mq6wt
@BEAN-mq6wt Жыл бұрын
This is great guy! I love the neighbors dog watching hahah😅
@clintonschloemer3874
@clintonschloemer3874 Жыл бұрын
Hey awesome build. Is this a 3 footer?
@nicholasburt6679
@nicholasburt6679 Ай бұрын
Best dad ever ) nice work
@davidburns5923
@davidburns5923 Жыл бұрын
Yo mate im also building one of these in the hutt. Hows the ramp handling our weather? And Would u recommend using 2 layers of 7mm ply or should i go a bit thicker.
@oziahmataroa9830
@oziahmataroa9830 2 жыл бұрын
Keep up the great work!
@nzbuilder
@nzbuilder 2 жыл бұрын
Thanks, will do!
@mrjmarv
@mrjmarv 2 жыл бұрын
Thats amazing just put sth over the fence below so in case of a fall you'll be good to work the next day!
@nzbuilder
@nzbuilder 2 жыл бұрын
Yeah I'm going to chuck up an extra high handrail on that side :)
@Cliche10k
@Cliche10k 2 жыл бұрын
Right on man! I’m definitely taking notes. Ps dont sell your self short that bs 5050 was butter
@nzbuilder
@nzbuilder 2 жыл бұрын
Cheers
@MrMiller27
@MrMiller27 Жыл бұрын
Hey bro what are the dimensions of this ramp? Where did u get the coping from and how much was it ? I’m looking to make a ramp myself but having trouble with what size pipe I need and such
@joshbolender
@joshbolender Жыл бұрын
Hey man enjoyed the vid! How much did it run ya to put together? That's a great mini ramp 🤘
@nzbuilder
@nzbuilder Жыл бұрын
excluding time probably around $1000 nzd
@oziahmataroa9830
@oziahmataroa9830 2 жыл бұрын
Hi Have you thought of showing other things that happen in your life? Aka friends, family. I enjoy your humor and I've been watching your channel for just over a year now. To just learn, gain and understand the whole build process. In preparation of having my own family home built for certain.
@nzbuilder
@nzbuilder 2 жыл бұрын
Hey Oziah, maybe in the future, but for now I will stick to building :)
@fazepocket1553
@fazepocket1553 Жыл бұрын
Its probably way to late to ask thos but how much was the cost of the whole build$
@JG-nk7ld
@JG-nk7ld 10 ай бұрын
Hey! Great build man. I am finishing up my 2 ftx10ft mini this week and had a question. How would you recommend to space out the screws on the plywood layers so they don't overlap? I am doing 3 layers total.
@nzbuilder
@nzbuilder 10 ай бұрын
Nice, let me know how it goes, I think next time ill do 3 layers
@JG-nk7ld
@JG-nk7ld 10 ай бұрын
@@nzbuilder I did 3 with the 3rd as 5mm underlay and painted then polyurethaned it to harden the surface more
@ScottSkopecMUSIC
@ScottSkopecMUSIC Жыл бұрын
Awesome, thanks!
@nzbuilder
@nzbuilder Жыл бұрын
🤙🛹🤙
@jayoray-ru7vh
@jayoray-ru7vh Жыл бұрын
I am watching this today…3 April 2023 Legend video mate 👏🏻
@nzbuilder
@nzbuilder Жыл бұрын
nice Jay - enjoy the mini ramp :)
@ryanodea5417
@ryanodea5417 Жыл бұрын
Nice vid Josh. What type of plywood did you use and did you seal it? Thanks mate
@nzbuilder
@nzbuilder Жыл бұрын
I ended up using two layers of H3 9mm CD ply, I had to soak it quite a bit to get it to bend, If I did it again I would consider 3 layers of 7mm, haven't sealed it yet, but thinking after this winter I will do something, Its still going strong 1 year in :)
@ryanodea5417
@ryanodea5417 Жыл бұрын
@@nzbuilder thanks a lot Josh. Much appreciated 🙏
@SH19922x
@SH19922x 4 ай бұрын
Do an update video on the ramp man did it get wet and slow? Did u paiint it with skate paint whatever they call it
@mitchellshcherbakov-jy1hn
@mitchellshcherbakov-jy1hn Жыл бұрын
How much did this all cost?
@geoffswan2847
@geoffswan2847 2 жыл бұрын
epic mate
@nzbuilder
@nzbuilder 2 жыл бұрын
cheers
@Joestacemazjojo
@Joestacemazjojo Ай бұрын
I’m sure I missed it but how much US dollars? Looked like 12 sheets plywood?
@evahrenee2470
@evahrenee2470 Жыл бұрын
hey i'm using your video as a guide to build my own ramp, are you able to tell me how many and what materials you used thanks
@nzbuilder
@nzbuilder 9 ай бұрын
hey it’s been a while since I built this, from memory about 10 sheets of ply and about 36 lengths of 2.4m 4x2 - draw it out on paper first to do some calculations 👍🏽
@joelkornder8934
@joelkornder8934 2 жыл бұрын
Nice build! rad dad
@nzbuilder
@nzbuilder 2 жыл бұрын
Thanks!
@dillonlove41
@dillonlove41 9 ай бұрын
How much did this cost?
@taylorsprincz3624
@taylorsprincz3624 5 ай бұрын
How much roughly was this?
@noahgowesky4712
@noahgowesky4712 Жыл бұрын
How much did it cost you to get supplies? not including tools
@nzbuilder
@nzbuilder Жыл бұрын
About $1000
@user-wu9zs9be3w
@user-wu9zs9be3w 10 ай бұрын
how thick are the two layers of boards on top?
@nzbuilder
@nzbuilder 10 ай бұрын
x2 9mm sheets of ply, but I would use x3 7mm next time
@user-wu9zs9be3w
@user-wu9zs9be3w 10 ай бұрын
@@nzbuilder 1.2cm 9mm 5mm Can I put it on like this
@jasontoi8628
@jasontoi8628 2 жыл бұрын
This is definitely client entertainment infrastructure
@nzbuilder
@nzbuilder 2 жыл бұрын
100%
@tactical1981
@tactical1981 6 ай бұрын
Always wanted a ramp in my garden, but always had neighbours to think about.
@cameraop8210
@cameraop8210 7 ай бұрын
was your dad a builder called Greg Chapman from Auckland?
@nzbuilder
@nzbuilder 6 ай бұрын
Not me, but great last name :)
@edo-j1784
@edo-j1784 Жыл бұрын
How did this end up working out for you?
@nzbuilder
@nzbuilder Жыл бұрын
awesome thanks, only thing I’d change next time is 3 layers of 7mm ply, not two layers of 9mm and I’d use skate lite on top if I could find it easily
@1414Gstevens
@1414Gstevens 11 ай бұрын
What is Easter Friday and Monday? In the USA we just have Easter Sunday.
@nzbuilder
@nzbuilder 10 ай бұрын
Good Friday & Monday becomes a day off work to make a long weekend :)
@thiccboibrigade
@thiccboibrigade Жыл бұрын
gonna be super familiar with this video as i am copying you brotha
@nzbuilder
@nzbuilder Жыл бұрын
awesome 🤙
@mrsbradpittiful
@mrsbradpittiful 6 ай бұрын
Your poor neighbours having to put up with skateboard in a ramp under their windows.
@eclecticcollected8570
@eclecticcollected8570 6 ай бұрын
😂
@nofoo337
@nofoo337 2 жыл бұрын
I hope I don’t build mine 20 years from now ): I’ve been wishing for 8 years now
@nzbuilder
@nzbuilder 2 жыл бұрын
Get it done !!!
@jbuild7654
@jbuild7654 2 жыл бұрын
Gotta love a tax write off
@nzbuilder
@nzbuilder 2 жыл бұрын
Always
@nickryall497
@nickryall497 Жыл бұрын
Can you elaborate?
Building a Mini Ramp Halfpipe [Start to Finish]
14:36
Bendheim Boards
Рет қаралды 667 М.
How To Build A Mini Ramp with Billy Rohan
12:38
VICE
Рет қаралды 1,6 МЛН
Русалка
01:00
История одного вокалиста
Рет қаралды 7 МЛН
39kgのガリガリが踊る絵文字ダンス/39kg boney emoji dance#dance #ダンス #にんげんっていいな
00:16
💀Skeleton Ninja🥷【にんげんっていいなチャンネル】
Рет қаралды 7 МЛН
HOW DID HE WIN? 😱
00:33
Topper Guild
Рет қаралды 49 МЛН
My Mini Ramp Cost & Regrets
17:47
Zack Dowdy
Рет қаралды 33 М.
Building My NEW Backyard Skatepark!
10:51
Jason Park
Рет қаралды 32 М.
How to make a Mini Ramp (DIY Halfpipe)
11:46
Wicked Random
Рет қаралды 68 М.
How to avoid these 5 DIY Skate Ramp mistakes
9:52
KEEN RAMPS
Рет қаралды 41 М.
How to build a bowl - skate park or ramp
19:53
OC Ramps
Рет қаралды 46 М.
Skating a Stranger’s PERFECT Backyard Mini Ramp
5:40
Chad Caruso
Рет қаралды 220 М.
How to Make a Portable Skateboard Ramp | DIY | Great Home Ideas
4:49
Great Home Ideas
Рет қаралды 103 М.
We built a Vert Ramp at a Malibu mansion
12:28
KEEN RAMPS
Рет қаралды 15 М.