How to Build a Studio Desk for Music Production Part 3

No video

How to Build a Studio Desk for Music Production Part 3

Рет қаралды 11,094

Күн бұрын

How to Build a Studio Desk Workstation for Music Production Part 3
Lets us know if this was helpful in the comments and how you personalized it to fit your needs.
Get your plans here- www.secondchan...
Check out all our links and socials
linktr.ee/seco...
#secondchancerising #workstation #studiodesk #roadofgrace

Пікірлер: 31

@TheGospelGuitarist 8 күн бұрын

Out of all the desk builds on YT that I've seen, this is the closest design to what I want in a desk. This is an outstanding desk in design and quality of work . I need to make a few changes to fit it where I need it but the center section width can be shorter for my Presonus 16.0.2. Drawers build into the lower sections are perfect. Great job! God bless your ministry.

@secondchancerising3025 6 күн бұрын

@@TheGospelGuitarist Awesome! Thanks for the comment. This is the great thing about this design is you can make your own adjustments pretty easy. Let us know how it works out for you!

@inkrot 10 ай бұрын

This desk looks nearly perfect for my needs since I do a little bit of recording but mostly mixing and mastering. I currently have a make-shift Ikea desk which is on its last legs since I built it in 2017 and has been disassembled several times. My main thing just like you is I've been hunting for so long is my ultrawide monitor + space for my audio monitors angled at a nice direction to my head. Based on your speaker placement and monitor size this isn't much bigger than my current desk which I have in my bedroom. I also have Kali monitors haha. I don't have much money since there have been a few unfortunate circumstances in my life but this is nearly perfect for my needs. Thank you for the plans and, while I may need to save up a little bit, I will see if I can get something close to this with a carpenter since my last try at building a rack mount for my church was.... less than stellar but its still standing. God Bless you!

@secondchancerising3025 10 ай бұрын

I hope you find the plans helpful! I’ve been using it for several months now it’s been working out really great. I haven’t really done much woodworking sense high school. Just measure twice cut once and take your time. Send us pics later.

@GeorgeAmodei21 7 ай бұрын

Yeah, MDF would be straight Manufacture Sheets where Ply can have some imperfections on the sheet depending on how many Ply's you go with. The Oak Accents look nice against the Black but also you could have gone another route and used ALL Melamine ...comes in lots of colors & Wood like Grain) & Just "Edge Band" it ( the raw edges..Iron on & Trim w/ Razor) plus Screw form Inside is the correct way, also they make these "Insert Nuts" which you drill not through but counter sink and they will be you anchor for a machine screw/bolt. Great Job!!! :) George

@secondchancerising3025 7 ай бұрын

Thanks for the comments, if I do another I will look into those suggestions.

@levelletate4551 10 ай бұрын

Beautiful Desk Sir!

@secondchancerising3025 10 ай бұрын

Thanks so much! Hope you find the plans useful if you decide to build

@edbattle4919 Жыл бұрын

Really nice built desk

@secondchancerising3025 Жыл бұрын

Thanks so much! I did a update video and added a few things be sure to check it out if you haven’t seen it yet. If your planing a build you can also download the plans.

@ZZ-ou7gp 9 ай бұрын

beautiful piece of furniture. Top job

@secondchancerising3025 9 ай бұрын

Thanks so much !

@estudiotazorion7497 3 ай бұрын

I really liked this project, I just didn't really understand the measurement as I don't have much calculation with measurements in inches if you had it in centimeters but I'll see if I can do that.. thank you ..👍🏻

@secondchancerising3025 3 ай бұрын

Glad you liked it. When you download the plans print them off. You can google an online measurement converter and write your sizes in. Hope that helps.

@brandinreed 10 ай бұрын

Love this!!! Especially love your heart for the Lord!! Gonna pull from this design to make something of my own! God Bless!!

@secondchancerising3025 10 ай бұрын

Awesome! Let us know how it turns out!

@guitarrens4912 5 ай бұрын

God 😁😁😁

@MuZiKm0n 3 ай бұрын

Great desk looking forward to building one for myself. What mount did you use for the monitor?

@secondchancerising3025 3 ай бұрын

Thank you! The stand came with the monitor. It’s a LG HDR WQHD. Let us know how the build goes!

@MuZiKm0n 3 ай бұрын

@@secondchancerising3025 Using a 43 inch Samsung tv built a 2 x 4 stand attached to the desk for the correct stud spacing and used a wall mount. Will let you know how it goes! Thanks! Have a blessed day .

@HalcyonGuitars 9 ай бұрын

Very nice looking setup!

@secondchancerising3025 9 ай бұрын

Thanks so much, hope it helps if you decide to build one.

@HalcyonGuitars 9 ай бұрын

@@secondchancerising3025 I think a fadeperport16 represents the top of my reality check, lol…

@CarlDCampbell1 8 ай бұрын

beautiful job!!!

@secondchancerising3025 8 ай бұрын

Thanks so much!

@vitalruz 7 ай бұрын

Good video, good story, good table, i want to do the same, please give dimensions)🙏 P.S. I accidentally pressed somewhere and a table drawing came to me! Thank you very much!🙏

@secondchancerising3025 7 ай бұрын

Thanks so much I hope you find it helpful if you build one let us know how it turns out!

@Petolooo 7 ай бұрын

3/4" 4ft x 8ft purebond birch plywood is $83 per panel here in my area. The Purebond Red Oak Plywood 3/4" 4ft x 8ft is $89 per panel; How many panels would you reckon I needed? I see you mentioned 4 pcs of 3/4 x 8" x 8' and 3/4 x 10" x 8' but those measurements confuse me since they are only for the outer red oak layers, for the entire setup how many 4ft x 8ft panels would you say is needed?

@secondchancerising3025 6 ай бұрын

I used 3 PCs of 3/4 x 4 x 8 birch plywood. The 3/4 x 8” x 8’ and the 10” wide PCs are solid oak not ply. The 10” wide pc is cut in half and used for both the upper outer sides. The 8” wide PCs are used on the legs at the bottom inside and out. I also used the 8” and rip to size for the leading edge accent. Hope that helps. Lay it all out measure twice and take your time. Let’s us know how it turns out.

@gc12n2 7 ай бұрын

What kind of black paint did you use?

@secondchancerising3025 7 ай бұрын

It’s was nothing special, pick it up at Ace Hardware. I went with a flat black at first and had to go back with the glossy. I should have done that in the first place looks nicer and cleans better.