Thanks for your comments. Did not think of that.

Thanks a lot man. I will keep them coming from time-to-time.

Thanks for the tip, I did not know about option.

Sharing my nodered nodes. You allso have to rewrite the + and _ hysteresis (0.5 degrees). I hope it is usefull . Import this to your nodered : [{"id":"9589b69d.bbb328","type":"ui_numeric","z":"e0130cf8.853438","name":"","label":"Set temperatura termostat","tooltip":"","group":"3259f561.7867c2","order":7,"width":0,"height":0,"wrap":false,"passthru":true,"topic":"","format":"{{value}}","min":"14","max":"32","step":"0.5","x":140,"y":600,"wires":[["f549a2ba.c9411","864e53af.d0f39","e9235d14.2f3a1"]]},{"id":"f549a2ba.c9411","type":"function","z":"e0130cf8.853438","name":"set temp on thermostat_1","func":"var x = msg.payload; msg.payload = \"TaskValueSet 2,1,\" + x; return msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","x":410,"y":600,"wires":[["36efc8f.de703b8"]]},{"id":"e9235d14.2f3a1","type":"function","z":"e0130cf8.853438","name":"","func":"msg.payload = msg.payload - 0.5; return msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","x":380,"y":640,"wires":[["2e27d4df.29239c"]]},{"id":"864e53af.d0f39","type":"function","z":"e0130cf8.853438","name":"","func":"msg.payload = msg.payload + 0.5; return msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","x":380,"y":680,"wires":[["f80913c7.379ba8"]]},{"id":"2e27d4df.29239c","type":"function","z":"e0130cf8.853438","name":"set temp_low on thermostat_1","func":"var x = msg.payload; msg.payload = \"TaskValueSet 2,2,\" + x; return msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","x":710,"y":640,"wires":[["36efc8f.de703b8"]]},{"id":"f80913c7.379ba8","type":"function","z":"e0130cf8.853438","name":"set temp_high on thermostat_1","func":"var x = msg.payload; msg.payload = \"TaskValueSet 2,3,\" + x; return msg;","outputs":1,"noerr":0,"initialize":"","finalize":"","x":710,"y":680,"wires":[["36efc8f.de703b8"]]},{"id":"36efc8f.de703b8","type":"mqtt out","z":"e0130cf8.853438","name":"","topic":"thermostat_1/cmd","qos":"2","retain":"","broker":"15d7bf30.a141d1","x":970,"y":600,"wires":[]},{"id":"3259f561.7867c2","type":"ui_group","z":"","name":"Termostat","tab":"f95d804f.8d658","order":1,"disp":true,"width":"6","collapse":true},{"id":"15d7bf30.a141d1","type":"mqtt-broker","z":"","name":"","broker":"localhost","port":"11883","clientid":"","usetls":false,"compatmode":true,"keepalive":"60","cleansession":true,"birthTopic":"","birthQos":"0","birthPayload":"","closeTopic":"","closeQos":"0","closePayload":"","willTopic":"","willQos":"0","willPayload":""},{"id":"f95d804f.8d658","type":"ui_tab","z":"","name":"Valori climatice","icon":"dashboard","order":5}]

I don't have this device any more to test, but if you look at the command reference, I think the TaskValueSet command looks like will work: www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference.

@@csongorvarga Thank you for answer. I am a beginner and I am just trying to penetrate the secret :) if I understand correctly, then the rule could be set when: if the status changes on the MQTT theme -homeassistant / thermostat / local / TempSet then TaskValueSet 2.1,% eventvalue% .... (value read from topic) If it doesn't bother you much, can I ask for help with writing a rule? For a long time I was looking for an ideal thermostat that could be controlled with buttons even through homeassisatnt and this one is great. It is a pity that the instructions do not include an easy way to integrate into homeasssiatnt. Thank you very much for your work.

with ESP Easy

From script you just add a PWM,, where state goes from 0 to 1023. But I think the ESP 8266 cannot do PWM on every pin, so please check before.

@@csongorvarga and i see he cannot do PWN at 10hz, only from 100hz

@@WZombie47 sorry, I missed the 10Hz requirement

I mentioned in the video what will be the mqtt topic for dummy variable. I don't how to configure that in domoticz.

Not really. My whole point in this video, that this device functions as a thermostat on it's own. And this is thanks to the rules. You will not be able to define such rules in Tasmota or ESPurna. With those you can only build a dumb interface (buttons, oled, relay), but you need something behind it to actually control it.

Csongor Varga I’m not saying you *should* use Tasmota, but just wanted to clarify that rules are fully implemented in Tasmota. You can set variables, run events based on temperature data, publish custom MQTT, etc etc. I do motion activated light operation based on sunset/sunrise times at my Lat/Long.

I don't have this demo board any more, but have a look at the Command Reference for ESP Easy, it says these commands can be issued via HTTP and MQTT as well. And I think the TaskValueSet is what you need: www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference

@@csongorvarga Found it. It's working well . Thank you.

Hi friend, I have the same problem! Have you dealt with the problem? Please help me too! Thanks!

@@psanya_ you can add Mqtt import and set Rules to Mqtt import to settemp. Like on MQTT#SetTemp do TaskValueSet 5,1,%eventvalue% TaskValueSet 5,2,%eventvalue%-0.1 TaskValueSet 5,3,%eventvalue%+0.5 endon

@@selimturan3726 Thanks, I added to the rules, I don't understand how the MQTT query string will look like.

Yes, you just flash the ESP Easy32 firmware. Keep in mind that is still an experimental version, but as they state the basics including the rules work.

How to install the same sketch in ESP32 HELTEC wifi kit 32 with OLED. When i used the ESPEasy_mega i am getting an error.Thanks in advance!

@@Alexkr123 There is a separate experimental version of ESP Easy for ESP32: www.letscontrolit.com/wiki/index.php/ESPEasy32

@@@csongorvarga Highly experimental ESPEasy32 R20100, I did used this to flash the ESP32 still not working. Is it possible to get the .ino file for this Binary so that I can edit, compile and upload.

@@Alexkr123 I think it is, but not sure how. That was too much for me and never gone to that level. Having said that I am not sure if the source is in the Arduino IDE.