How to Build an 8 Person Picnic Table

How to Build an 8 Person Picnic Table | WOOD Magazine

Рет қаралды 48,183

Күн бұрын

This impressive picnic table holds a lot of people but only requires a few tools to make. The notched frame pieces, crafted from home-center lumber, lock together like Lincoln Logs, forming a rock-solid structure. Cutting the notches requires only a circular saw. Jim walks you through this surprisingly easy build that will serve you for many summers to come.
#PicnicTable #Project #DIY #HowTo #Wood
00:00 Introduction
00:56 Build the Seat Assembly
14:17 Build the Lower Frame Assembly
18:05 Build & Install the Risers
19:38 Upper Frame Assembly
22:10 Top Cleats and Braces
25:09 Installing the Table Top
30:43 Making the Seat Tops
Purchase the complete plans at woodm.ag/picnic
Subscribe to the WOOD KZfaq channel: kzfaq.info_...
Subscribe to WOOD magazine: www.woodmagazine.com/subscribe
Get digital issues for iPad, Kindle, and more: www.woodmagazine.com/digital
Official website: www.woodmagazine.com
Shop for woodworking project plans at: www.woodstore.net?a=youtube
Read tool reviews from WOOD editors and other real woodworkers at: www.woodmagazine.com/review
Facebook / woodmagazine
Twitter / wood_magazine
Pinterest / woodmagazine
How to Build a 8 Person Picnic Table | WOOD Magazine

Пікірлер: 33

@dwaaziwaazi 10 ай бұрын

Beautiful. I barely had the patience to make basic picnic tables. This is next level..

@tomsommer54 Жыл бұрын

That is beautiful.

@howardbailey5760 2 ай бұрын

Great job and an awesome design!

@user-bj6cq8em8d 10 күн бұрын

I built one of these about 7 years ago. Still holding up well as I used western cedar.

@swms26 Жыл бұрын

Top quality explanation!

@cleokey 2 жыл бұрын

Nice job

@EduardoGonzalez-gn8ld 3 ай бұрын

Me encanto si forma de desarrollar su trabajo me gustó mucho y aprendí algunos trucos que ocupare muchas gracias.

@kyleolson8977 2 жыл бұрын

I would like to learn more about how to clone myself like Jim does. I could use an extra hand sometimes.

@Wood 2 жыл бұрын

Jim is kind of like the Flash: he moves too fast for the camera and it makes it look like he's in multiple places. It exhausts the rest of us, to be honest.

@phillipsmith4814 2 жыл бұрын

Beautiful table and very good step by step instructions. One question; could this table be modified to accommodate a power wheel chair? Thanks.

@sgtlind428 2 жыл бұрын

Sweet project! Think I'll tackle this one soon in my garage. The ending made me chuckle, measuring the door opening and then the table, and finally the chainsaw coming out. Been there with a loft bed for one of my kids that was too tall for the room with a ceiling fan I didn't consider. Got the whole thing in the room only to realize, nope, this aint gonna work. Sawzall time.

@Wood 2 жыл бұрын

We're leaving the end like a Choose-your-own-adventure book: Should Jim chainsaw the table or the doorway?

@sgtlind428 2 жыл бұрын

@@Woodha! thats a tough one. Or maybe Jim just gained a sweet new picnic area in his shop....

@Brianmatthewward 3 ай бұрын

The very end 😂

@johnslaughter5475 2 жыл бұрын

The weather has finally warmed up where I can start working on the table. I came up with a question with the 3/8" holes to accommodate the bolts. When I seat my 3/8" bit in the chuck it's a good 1/4" - 3/8" short of the 4-1/2" needed to go all the way through. I don't like not having the bit fully seated. How did you do this? I was thinking a 1/4" long bit would work for creating a pilot hole and then I could drill the 3/8" hole coming from both sides. Thanks. 😊

@GaryArrington-ft3cf 2 ай бұрын

Does the construction adhesive you use hold up better than the outdoor rated wood glue? I was surprised at what you used for gluing. Thanks for the great video

@SteveBernacki-qw6le 2 ай бұрын

It would help if you mentioned some overall dimensions of the wood being used, as well as using spacers on the top boards and seats, for i fine they will rot in a few years. other wise great job.

@leonpse 6 ай бұрын

Is it necessary to have the chairs attached? Is it to prevent theft.

@gregoryschullo1088 Жыл бұрын

I didn't see any pilot holes being drilled, was that by design? Would you not be concerned with splitting near the screw placement?

@everettfoster2961 Жыл бұрын

Are cut plans available for this table?

@kenbred46 2 жыл бұрын

Looks like it would be heavy as hell and a bear to move

@Wood 2 жыл бұрын

We did this out of cedar, which makes it lighter than it looks. Pressure treated lumber would be a bit of a different story, if you went that direction. Either way, you'll need to phone a friend for moving it around.

@threesixmarine 4 ай бұрын

HI, can you tell me the completed dimensions of the bottoma area footprint (when completed)?

@user-ww7df5jv8o Ай бұрын

What's the total foot print from the back of one bench to the back of the bench on the other side of the table? I want to buy the plans and make this, but I'm not sure if it will fit my patio. BEAUTIFUL project and VERY clearly described!

@Wood Ай бұрын

Looks like it will come out to just under 89" (7' 5")

@user-ww7df5jv8o Ай бұрын

@@Wood Thanks! Waiting for the printed plans in the mail. 7'5" works great...

@user-ww7df5jv8o Ай бұрын

Do you have patio chairs that are of a similar design?

@Wood Ай бұрын

We didn't make patio chairs specifically to match this picnic table, but you can take a look here and see if there's anything you like: www.woodstore.net/Outdoor-Furniture-s/84.htm

@SBFHOAViolations 4 ай бұрын

how much did all the lumber and hardware cost to build? assume pressure treated wood, not expensive cedar.

@johnslaughter5475 2 жыл бұрын

My wife works at our High School and she told me they need to get some new tables. This definitely looks like it's plenty substantial enough to stand up to the abuse of high school students. But, what would you think of using lag screws to attach the top and seats? They could be sunk about 1/4" below the surface and then use plugs to fill the holes to hide the screws. The other thing for additional strength would be to use bolts that are an additional quarter inch long. After the nuts are tightened, the extra length could be peened over to prevent the nuts from being removed. You know, even cedar will eventually decay, especially when sitting on the ground. Now, one solution would be using 8x16 patio blocks. Get the pink ones for color. Or, what about using Flex-Seal? Put about a 3" boot around every leg. That should completely protect them from wet ground. A little pricey though.

@SBFHOAViolations 4 ай бұрын

how much did all the lumber and hardware cost to build?

@johnslaughter5475 4 ай бұрын

@@SBFHOAViolations When I first bought it, during Covid, it was around $500. I haven't priced it recently. There's a similar one that I have priced and its current price is just over $300. That one is made of dimensional cedar.