HOW TO Build an Infeed table (support) for your Dewalt Table Saw

Рет қаралды 35,229

Күн бұрын

How to build an Infeed support table to your Dewalt Table Saw to provide both in-feed support and triple the cross-cut capacity of your saw.
▼LOOK BELOW: For more information related to this video and the products I use▼
Want to build the Multi-Function Tool Cart seen in the video, check the links below!
Link to Episode 1: • HOW TO BUILD a Multi P...
Link to Episode 2: • HOW TO BUILD a Multi P...
Link to Episode 3: • HOW TO BUILD a Multi P...
Link to Episode 4: • HOW TO BUILD a Multi P...
▼TOOLS I OWN AND RECOMMEND:
Riveco Work Apron (the one I wear): amzn.to/3qdwRUO
iGaging 4" & 6" Double Square Set: amzn.to/3Ipvmco
Glass Polish 15901 Hand Sanding Block, Handheld Sanding Holder with Hook & Loop Fastener - amzn.to/3K8pQfH
Dewalt Right Angle Attachment: amzn.to/3vsUQmD
FastCap "Righty/Lefty" Tape Measure: amzn.to/3HstWO9
Bosch Self-Centering Drill Bit Set: amzn.to/3sxfakG
Amana Tool - (55227) Carbide Tipped 82° Countersink with Adjustable Depth Stop & No-Thrust Ball Bearing, 3/8 Dia x 1/8 Drill: amzn.to/3ItNLG1
Dewalt 5" Random Orbit Sander: amzn.to/3fahve8
Dewalt XR Impact Driver: amzn.to/3f8ztOc
KREG Circular Saw Track: amzn.to/3KJKmnW
Silicone sheets to use for glue-ups and to protect work surfaces: amzn.to/332glih
Wynn Environmental 35C222NANO Filter Kit: wynnenv.com/products-page/woo...
AnyCubic Mega S Printer: amzn.to/37fiF7u
AnyCubic PLA Filament: amzn.to/3uOMWSC
Grr-ripper Push Block: amzn.to/379gwdg
Grr-ripper Gravity Heel: amzn.to/3u2nM3H
(If you use one of the Amazon affiliate links above, I may receive a small commission)
FACEBOOK: / suburbangarageworkshop
INSTAGRAM: / suburbangarageworkshop
WEBSITE: suburbangarageworkshop.com/
TWITTER: / sgarageworkshop
Copyright 2022, SuburbanGarageWorkshop, All Rights Reserved.
For information purposes only, user assumes all risk.
#woodworking #infeedtable #infeedsupport #in-feed #tablesaw #dewalt #tool #toolbench #table #saw #DW735 #lifehacks #diy

Пікірлер: 46

@1015cardinal 7 ай бұрын

I like how you put the planer under the table wing, good use of space!

@RatBasterd Жыл бұрын

I like that this is removable so it won't get in the way when it's not needed. I have the DWE7485, and it's miniscule infeed makes some things tricky. But I didn't want to attach something that would make it hard to access the front controls. This looks like a great compromise!

@jeffsmith8836 Жыл бұрын

I like your channel because you show some really great ideas for someone with a small shop.

@thomasherlihy8670 Жыл бұрын

Fantastic info! I haven’t made a workbench around my job site saw yet but I’ll try this soon.

@iangibbon5771 Жыл бұрын

Great video. I have the same saw and am building my infeed exactly like yours. I like it that you can still operate the fence with this design. A simple solution that works! Keep at it.

@gerrybyrne6230 2 жыл бұрын

Great job again Kevin. Look forward to seeing your projects.

@TheSuburbanGarageWorkshop 2 жыл бұрын

Thanks Gerry! Hopefully more stuff to come in the next few days!

@shrimpinpat 9 ай бұрын

Just ordered this saw with the stand for 300. Don’t plan on using the stand much rather I’d like to build something g similar to what you have done. New to this all and my primary concern between this and the 10” dewalt was the in feed . Thanks for the information

@bking0220 Жыл бұрын

Great idea and great job. I have the same saw, too and need to add one of these. I love those threaded inserts and have used them a few times too!

@rossgaspar9488 2 жыл бұрын

Great to see this saw bench growing. I got to build one...

@TheSuburbanGarageWorkshop 2 жыл бұрын

Thanks!

@abad_gtr1123 Жыл бұрын

this was a great idea! i have the 7491 and built a mobile cart for it...should be able to add this infeed piece to make it more versatile. thanks for the clear video...

@stevencolwell1092 Жыл бұрын

Awesome! Simple fix to a major flaw with a jobsite size table saw. Thanks.

@joewalton6056 4 ай бұрын

Great video, thanks!

@Xdonald331 Жыл бұрын

Found your channel and love it! I like that you are using the dewalt jobsite saw... too many channels on KZfaq with guys and their expensive big saws! Like you I do mine in the garage

@user-sz1ws6qg5u Жыл бұрын

Nice job. Good video.

@Ray_Here Жыл бұрын

Well done!!!

@Ray_Here Жыл бұрын

Nice job. I want to do something similar and will most likely steal a few ideas!! Thanks!

@robjeffrey7544 4 ай бұрын

Thank you!

@truckerdan1250 Жыл бұрын

Wow great idea same situation with me I have been building your bench with a little modifications because I have a Milwaukee table saw and I was thinking of making a crosscut sled and found out it’s to big for the stabilizing great idea thank you now I can build my crosscut sled whatever size I need

@TheSuburbanGarageWorkshop Жыл бұрын

Great to hear! Let me know how it comes out!

@rh9915 Жыл бұрын

Good stuff

@WoodUCreate 5 ай бұрын

Turn the miter gauge around in the slot and cut it that way, or build a panel jig. Both of these will also work without an infeed table.

@jorgepallares7149 3 ай бұрын

Very nice I really need to make this where do you get the black melamine looks very nice

@withJordanFrank 2 жыл бұрын

Great idea and execution! I'm excited to stumble on your channel because 1) it looks like you've got a lot of helpful content, and B) I'm also in the Chicago burbs (Oak Park) and have a new(ish) youtube channel built around a bench I made. We're like twins, only you're better looking!

@TheSuburbanGarageWorkshop 2 жыл бұрын

Nice to meet you neighbor! If I'm the better-looking one, then I really feel sorry for you! haha! There are a few other folks like us that live in the area as well ith smaller channels. So we try to help each other out where we can. Thanks for checking out my channel!

@withJordanFrank 2 жыл бұрын

@@TheSuburbanGarageWorkshop Yeah man, fair warning: I might try and organize some meet-up or collaboration or other such nonsense one of these days. It might just involve staring at walnut slabs while eating beefs and drinking Old Styles, but it's still something. You've been warned!

@TheSuburbanGarageWorkshop 2 жыл бұрын

@@withJordanFrank Sounds like a plan! I'm out in North Aurora/Batavia Area.

@pbk380 2 жыл бұрын

I like your Incra miter gage,

@TheSuburbanGarageWorkshop 2 жыл бұрын

Thanks, it's one of the few premium tools I own that isn't a powertool.

@RussWilsonII 2 жыл бұрын

Great video! Looking for the next modifications you intend to make! Any particular reason you didn't also cut an extended miter slot for the one to the right of the blade? Would make it compatible w/ a deeper miter sled if you ever need that in the future, too, no?

@TheSuburbanGarageWorkshop 2 жыл бұрын

It could absolutely be done. But, In the years I used my saw, i've never used the right miter slot so I didnt spend the time route the other slot. On the infeed if you did that, then you would have to move the fence fully out of the way, then you couldnt use it for infeed support for when making rip cuts on the long boards against the fence.

@jefferyhaws7565 Жыл бұрын

You have a very good video and explain things really well. I have a 7491 and I don't have the ability currently to put my table saw into any kind of fixed Cabinetry. I'm trying to find a video that would let me put and in feed platform that is easily removable. My saw stays on the cart all the time because I have no room to really have it set up. I have to put my saw away every time I'm through using it. Even though I can't use your idea, I appreciate how will you explain it.

@TheSuburbanGarageWorkshop Жыл бұрын

Thanks. Hopefully you can find something that works for you!

@michaelconstable1211 Жыл бұрын

Link to plans for infeed table seems to be busted. Are they still available?

@phaZe0 2 ай бұрын

Hey thanks for the ideas! Quick question, where did you find black melamine particle board? I can only find white pre-laminated, or black melamine sheets that cost 3x as much that need to be glued on

@TheSuburbanGarageWorkshop 2 ай бұрын

Menards stocks it.

@user-yh9yj7to1u Жыл бұрын

Very cool and this is exactly what I wanted 👍👍. But just one query about your two turning nobs, just wondering they will get loose over time as the wood threads will eventually get worn out. Maybe it’s better by using two insert screws and the turning nobs then screw into them…😂

@TheSuburbanGarageWorkshop Жыл бұрын

It uses metal inserts, and the knobs screw into those.

@RichieRich845 Жыл бұрын

Add a dowel to each side of your infeed table and two holes on the work bench to locate the infeed table quickly and your not searching for the existing holes, just an idea.

@glock36auto Жыл бұрын

Link for plans is not active/working right now

@gerardosmi2933 2 жыл бұрын

Whats the saw model Bro? Definitley Will be buoldong something like this. Do you have plans?

@TheSuburbanGarageWorkshop 2 жыл бұрын

Dewlt DW745 but should work for similar saws. Check the description above for link to the shop cart videos and plans

@phillipjester5674 2 жыл бұрын

Nice design and video. I have this same DeWalt saw and have a good out feed workbench based a heavily modified Paulk work bench but, of course, not having any in-feed it’s hard to use many of the jigs I’d like to make. I did make an in-feed addition which after many modifications seems to work ok but, it’s big, bulky, needs extra support and not always accurate for matching up to the miter slots. I believe I will use your design soon and appreciate your providing your simple but very workable design.

@TheSuburbanGarageWorkshop 2 жыл бұрын

Sounds great. Let me know how it comes out!