How to Build Garage Shop Doors

Рет қаралды 117,827

Күн бұрын

After months waiting for a garage door I decided to build my own garage shop doors which was the best decision I think.
2 Pack Metal Lock Barrel Bolt: amzn.to/3wwgh6X
6 Pack T Strap Hinge Shed Hinge: amzn.to/3tkn2qr
Door Latch T-Handle Lock Kit: amzn.to/3wge7rB
Lower door seal: amzn.to/3VBhPFp
Hello everyone, First I want to thank all of you that have Subscribed and Liked my videos, YOU ARE THE BEST! As always please comment with questions or thoughts because we are a great community that want to learn together.
Well as many of you know I have been waiting for a garage shop door for awhile now and they keep moving the delivery date more and more so here is How to Build Garage Shop Doors for those who may like a lower cost better door. The opening is a 10' x 7' and was a fun build and I hope you enjoy it.
Connect with Me!
Follow Me On Facebook: jimbuildstuff
Follow on Instagram: / jimbuildstuff
How About Twitter: / iliketobuildst1
Check out Pinterest: / iliketobuildstuff
#woodworking #garagedoors #shopdoors
IGNORE KEYWORDS:
Garage,Garage Door,How-to (Website Category),diy,install,roll,roll up,installation,new,man,cave,Do It Yourself (Hobby),residential,house,overhead,steel,insulated,Outside,Door (Industry),Open,Doors,woodworking outdoor projects,IL2BS,I Like To Build Stuff,ILikeToBuildStuff.org

Пікірлер: 173

@rixtrix11 10 күн бұрын

Thanks again for posting this! I got the 2 doors made, trimmed, insulated and painted. I had to use 1/4" plywood as the rockwool insulation is too dense to cover smoothly with 1/8" luan. The doors fit great, don't sag and can easily be opened and closed, even though each one weighs over 100#. I also used 2 packs of the metal lock barrel bolt you have listed in the description; work great!

@ILikeToBuildStuff 10 күн бұрын

Nice! appreciate ya commenting and watching!

@keo5295 Жыл бұрын

Exactly what I was looking for. No BS intro, straight to the point. Easy to follow instructions. TYVM

@ILikeToBuildStuff Жыл бұрын

Thanks for watching I appreciate it!

@bobthompson7508 2 жыл бұрын

I was in the same boat, I have had a door on order for about three months now and they are telling me it could be another three months. Thanks for the video I am going this way.

@ILikeToBuildStuff 2 жыл бұрын

Thanks for sharing Bob, remember to ask if you need any help with your build we are all here to help

@nate-408 3 ай бұрын

Cut knot off measure from other end lol. Good job on the bracing, most people reverse this which renders it useless. Nicely done bud thanks for sharing.

@ILikeToBuildStuff 3 ай бұрын

Thanks for the tip Nate!

@Canbechangedtwiceeveryfourteen Жыл бұрын

Best one I’ve watched so far. Efficiently making something quite durable. Thank you

@ILikeToBuildStuff Жыл бұрын

Awesome, thank you!

@chadbleakley3744 Жыл бұрын

I followed these directions and the results were great

@ILikeToBuildStuff Жыл бұрын

I'm glad Chad, and thanks for joining in here I sure appreciate it.

@xXMJHarvey89Xx 11 ай бұрын

This is the EXACT VIDEO I was looking for. Thank you for your time and posting this.

@ILikeToBuildStuff 11 ай бұрын

You're very welcome! Thanks for watching

@justinianoamado3980 Жыл бұрын

Straight to the point 👉 I love it!

@ILikeToBuildStuff Жыл бұрын

Thanks for watching I appreciate it!

@chrisblanco8923 Жыл бұрын

This is exactly what i need to do. Perfect, thanks!

@ILikeToBuildStuff Жыл бұрын

That's great Chris, thanks for the support and have a great Monday!

@ad-rock603 Жыл бұрын

Must be very satisfying to be able to build with such skill & precision. Thanks for sharing

@ILikeToBuildStuff Жыл бұрын

I sure appreciate you joining in here and the great comment it means a lot to me that you would take the time to watch my video!

@Janton_1 6 ай бұрын

Thank you so much for this as you have saved me money and pride of doing it myself.

@ILikeToBuildStuff 6 ай бұрын

You're very welcome Jason! Thanks for watching I appreciate ya!

@richardross119 Жыл бұрын

@I Like To Build Stuff, I never thought of using wood glue as a sealer and secondary bonding agent. Thanks for the tip

@ILikeToBuildStuff Жыл бұрын

Glad to help

@bradleywalker1283 7 ай бұрын

Perfect exactly what I was looking for and the insulation was a brilliant touch ! Great job sir better than anything you could have bought! Keep up the good work

@ILikeToBuildStuff 7 ай бұрын

Hey thanks for the great comment and watching my video I sure appreciate it!

@rhondamendonca2648 Жыл бұрын

Absolutely the best design I have seen! We will be moving a 27' trailer into a 600 sq ft Carraige House we build first , before the 800 sq ft House. All on a build as we earn time-line. This idea will WORK! You made my day! Thank you!

@ILikeToBuildStuff Жыл бұрын

Wow, thanks Rhonda! You sure made me smile today! Thanks for watching.

@jackm.3666 Ай бұрын

Wow! I need to build six of these. Never thought of laying the 2x4's on the side. Excellent video and thanks!

@ILikeToBuildStuff Ай бұрын

Glad it was helpful! Thanks for watching and commenting!

@Mclarenbod 9 ай бұрын

Fantastic video, I'm about to use this for my own insulate garage doors in the UK. Thanks for the knowledge share!

@ILikeToBuildStuff 9 ай бұрын

Glad it was helpful! Thanks for watching and the support.

@thirdearthsurf 10 ай бұрын

Good job sir. My carport height was just shy of what I needed for a standard garage door. I am a carpenter by trade, so when I was searching for ideas, I came across your video. I’ve used your idea on my house but I added windows to each door. Anyway, I appreciate your upload and from the looks of the comments, you’ve inspired many to do the same! 👍🏽

@ILikeToBuildStuff 10 ай бұрын

Glad I could help and thank you so much for taking the time to comment along with watching, I sure appreciate it.

@petesanchez557 7 ай бұрын

Thank you 🙏 This helped me for my shed project I’m working on. Really good video 👍🏼

@ILikeToBuildStuff 7 ай бұрын

Thanks for watching Pete, I appreciate ya!

@scottm5425 2 ай бұрын

Very nice, exactly what I was after. Thanks.

@ILikeToBuildStuff 2 ай бұрын

Glad it helped Scott! Thanks for watching I sure appreciate it.

@jerryshoe7827 Жыл бұрын

Great job on your doors, they look great.

@ILikeToBuildStuff Жыл бұрын

Thanks for watching I appreciate it!

@user-rx6dz8ds7d 7 ай бұрын

Perfect design. I'm going that route.thanks for the tutorial brother 🙂🙂👍🏽👍🏽

@ILikeToBuildStuff 7 ай бұрын

No problem 👍 Thanks for watching I appreciate it!

@erfaerfaerfde 2 жыл бұрын

I agree with Bob, I am having a heck of a time finding stuff at a reasonable price! My shop I'm building has increased my cost by almost 22% over the last few months and where I'm at I couldn't buy everything back when it was cheaper because they HOA won't let me stock up lumber etc.

@ILikeToBuildStuff 2 жыл бұрын

OMG the prices are crazy and I feel your pain Harry. Thanks for watching I appreciate it!

@JoseMiguel-qw2lh Жыл бұрын

Excelente, maestro! Saludos desde Perú.

@ILikeToBuildStuff Жыл бұрын

Thanks for watching I appreciate it!

@grayhawk7354 8 ай бұрын

This was a great instructional common sense video that was perfect information for my project.

@ILikeToBuildStuff 8 ай бұрын

Glad it was helpful! Thank you for watching, I sure appreciate it!

@kajbyman3006 Жыл бұрын

Thanks for the video👍.Just what i needed,i am gonna make one too.

@ILikeToBuildStuff Жыл бұрын

Glad it helped, Thanks for watching I appreciate it!

@iammusic1950 Жыл бұрын

Awesome.

@ILikeToBuildStuff Жыл бұрын

Thanks for watching I appreciate it!

@713anand 10 ай бұрын

Nice design, I’ll probably copy it. I’ll probably do the painting before the hinges are attached though

@ILikeToBuildStuff 10 ай бұрын

Thanks for watching I appreciate it!

@MarkJonesNYC Жыл бұрын

This is just what i'm looking for thanks, need to get rid of my up and over door to give me room for a golf simulator in my garage (Don't tell my wife)

@ILikeToBuildStuff Жыл бұрын

LOL that sounds like a plan, thanks for watching Mark, I appreciate it!

@carterscustomrods Жыл бұрын

Looks good! I wish I was able to use simple doors like that, but the hurricanes here made me me over-engineer it like crazy.

@ILikeToBuildStuff Жыл бұрын

I understand that!

@MannistoCay 7 ай бұрын

Nice work, definitely using this design for our PoleBarn. Cheers Mark at the Cay.

@ILikeToBuildStuff 7 ай бұрын

Thanks Mark, I appreciate the support

@thornwarbler 10 ай бұрын

Lovely job mate........Cheers

@ILikeToBuildStuff 10 ай бұрын

Thank you! Cheers!

@robertgibbs5022 Ай бұрын

Nice door man, thank you for video. Subscribed!

@ILikeToBuildStuff Ай бұрын

Hey Thanks Robert, I appreciate it.

@humbleisf1759 Жыл бұрын

Amazing

@ILikeToBuildStuff Жыл бұрын

Thank you! Cheers!

@douglasmurphy323 8 ай бұрын

Thank you for this video I need to rebuild my garage doors they are too heavy the wood ones that I've built and I could not find hinges to support them

@ILikeToBuildStuff 8 ай бұрын

Glad I could help, thanks for watching Douglas.

@ceanorme 6 ай бұрын

That was a great video. Thank you. What kind of hinges should I use if I want the droors to open inwad?

@ILikeToBuildStuff 6 ай бұрын

Hey thanks for the comment, You can either use the hinges listed on the interior instead or if you don't want to see the straps on the inside then use something like these hinges here amzn.to/3Ri5C9y Hope it helps and thanks for watching!

@TheDreamweaver18 Жыл бұрын

Doors look great. Very nicely done. I need to build a set with each door being 6’wide and 12’ high. Would I approach doors of that size any differently than the method you used?

@ILikeToBuildStuff Жыл бұрын

Hi Jacob, if you are planning to insulate them I would say put an X frame inside but if no insulation is needed or very little I would lay the framing flat for less sag but either way I would run a diagonal adjustable cable for extra strength. Let us know how it goes!

@ronh9384 6 ай бұрын

Nice set of doors! Subbed!

@ILikeToBuildStuff 6 ай бұрын

Thanks for the sub Ron! I appreciate ya! Thanks for watching my video also!

@romans.2401 10 ай бұрын

Hi Great video! Did you have to build Jambs for this door? Also, if I followed a similar design but wanted to add glass to the top for windows… how do you recommend doing that? Just want to make the sure the engineering is done right to support the glass.

@ILikeToBuildStuff 10 ай бұрын

Hi and Welcome, Yes I had to build the jams but that was just trim boards. You can add windows just as you would when building a wall just be sure to keep the diagonal bracing under the windows

@seanwhalen8220 Ай бұрын

Hi Jim! Great video. Do you have any advice on sealing / weatherstripping?

@ILikeToBuildStuff Ай бұрын

I used this seal at the bottom that works great amzn.to/3VBhPFp I used the 1 inch foam seals around the doors inside trim amzn.to/3Hp2i6q

@seanwhalen8220 Ай бұрын

@@ILikeToBuildStuff Thanks!!

@ILikeToBuildStuff Ай бұрын

@@seanwhalen8220 No problem, anytime.

@davediver463 Жыл бұрын

Do you have more detailed video or comment of how you kept the door panel in the correct position while attaching the hinges. I've never seen the hinges attached to both the door and building at the same time. Thanks

@ILikeToBuildStuff Жыл бұрын

Hi Dave, I actually set the door frames in the opening and shim them where they are to be and then mark the frame where the panel grooves match up then when doors are done I set them back in the opening and set the trim on the doors so I know that I can install the hinges while keeping the doors straight. I hope that is what your question was.

@relectric720 8 ай бұрын

Thankyou for the video. The door you build out of 2x4 and t11 siding will it the keep the heat in .

@ILikeToBuildStuff 8 ай бұрын

Yes it does when sealed as you would do any exterior door. I used wide interior trim with 1x1 self sticking foam weatherstrip.

@relectric720 8 ай бұрын

Thank you for getting back to me .I was thinking about building exterior door the same way you did here what's your thoughts on that Thank you.

@ILikeToBuildStuff 8 ай бұрын

@@relectric720 Should work fine for ya.

@sonyareagle5400 Жыл бұрын

With how you did your video, it gives me confidence that I’ll be able to do this on my own. I have a circular saw but not a table saw, though I don’t think that’ll interfere with me completing my project. I have a question for you though. Do you think it would be fine for me to use my jigsaw and cut out windows in the paneling? I’d be using plexiglass for the windows. I also won’t be insulating my doors as the rest of my garage in nowhere near insulated or even airtight. (House was built in 1890.)

@ILikeToBuildStuff Жыл бұрын

Hi Sonya, thank you for the great comment and your in a great community here to help and cheer you on. Sure you can use a jigsaw if you are more comfortable with it. Keep us updated on you progress! Thanks for watching.

@bobthompson7508 Жыл бұрын

Absolutely we are here for you Sonya! You can do it!

@MrAvlandrew 6 ай бұрын

u make look so easy 😊

@ILikeToBuildStuff 6 ай бұрын

Just take your time and plan it out, you can do it no problem! Thanks for watching and commenting I sure appreciate it.

@MrAvlandrew 6 ай бұрын

I am about to frame out front and back of carport, 20 X 12 ft. back side will have a steel door, front side i’ll build 2 - 5 x 8 swing out doors to allow car entrance

@ILikeToBuildStuff 6 ай бұрын

@@MrAvlandrew If you like I would love if you would send some pics of your project by email.

@MrAvlandrew 6 ай бұрын

@@ILikeToBuildStuff Ok i will try to remember to send some pics, thx.

@ro63rto 3 күн бұрын

2:40 - in your opinion, is the 'British Brace' you used stronger than the 'Double Zed Brace' ? I want to add a backing to my new doors but am worried about the extra weight. There are three substantial band hinges on each door.

@ILikeToBuildStuff 3 күн бұрын

Both have their merrits, I have never had a problem with this style sagging but I would say go with whichever you are more comfortable with. Thanks for watching and commenting I appreciate it.

@rixtrix11 3 ай бұрын

Great video! I'm using it to make similar doors for my new 24x32 shop with a 9'x10' door opening. 6-7 month delivery expectations and cost especially are 2 things why I decided to go this way. Also, my shop will be used mostly for building my 1966 Chevelle autocross car, welding and personal vehicle maintenance, so I don't really need doors that are convenient and easy to open several times a day or week. Have you another video on how you sealed the door, yet?

@ILikeToBuildStuff 3 ай бұрын

Sounds great! I used 1x1 self stick foam weatherstrip on the overlapping trim pieces and a garage floor door seal. amzn.to/3VBhPFp amzn.to/3OFqoON and amzn.to/3HVaBrC Hope this helps

@rixtrix11 3 ай бұрын

@@ILikeToBuildStuff thank you for the info!

@ILikeToBuildStuff 3 ай бұрын

No problem thanks for watching!@@rixtrix11

@garretthill964 Жыл бұрын

Did you create an air tight seal around the door and if so how was that achieved?

@ILikeToBuildStuff Жыл бұрын

Hi Garrett, I used a garage door seal on the bottom and trim with foam weather seal around the rest. amzn.to/3VuH4u2 and amzn.to/3yGnuRS

@KBMB47 15 күн бұрын

This is the video I was watching and I can’t find what you used for weather stripping. I’m making doors for an old barn for a pool room and am wondering what you thought about bronze spring weather stripping. Thanks….enjoy your videos!

@ILikeToBuildStuff 14 күн бұрын

I used this seal at the bottom that works great amzn.to/3VBhPFp I used the 1 inch foam seals around the doors inside trim amzn.to/3Hp2i6q

@KBMB47 14 күн бұрын

@@ILikeToBuildStuff thanks for the information…have you ever used bronze spring weatherstripping…just curious. That’s what’s on my house and it’s been there 100+ years. Only reason…thanks again.

@ILikeToBuildStuff 13 күн бұрын

@@KBMB47 Yes I have but don't think the cost is worth it with the new stuff out that may not last as long but still 25 years or more depending on the application.

@KBMB47 12 күн бұрын

@@ILikeToBuildStuff Ok thanks for the information!

@meep6188 Жыл бұрын

I'm curious on how you did one door to overlap the other. Wish you'd have shown that in the video. In my mind, that central overlapping trim piece would have to stick out past the wall, further than the rest of the trim.. is that what you did? Can't quite picture how you can have it overlap and all stay on the same line

@ILikeToBuildStuff Жыл бұрын

Hello and welcome, Yes that is what I did by using a 1x6 for the center overlap. Good eye!

@cnorth50 Жыл бұрын

what did you use to make the design printout?

@ILikeToBuildStuff Жыл бұрын

Hi Craig, I used sketchup from google

@christinannj Жыл бұрын

What size are you using for the trim on the outside? 1x4?

@ILikeToBuildStuff Жыл бұрын

Hi, They are 1x4 with a 1x6 center overlap

@lilripperboyAsher 5 ай бұрын

Do you have a link to the video with the seals?

@ILikeToBuildStuff 5 ай бұрын

Sorry I don't, I am not sure were it went but I used the 1" square weatherstrip peel and stick ( amzn.to/3RN5lKY ) against the interior trim that compressed to half inch with doors closed. floor seal i used was amzn.to/3VBhPFp

@Kurt9099 9 ай бұрын

Great video. How much smaller than your rough opening were your doors? Or maybe it's better to ask the clearance on all sides of each door.

@ILikeToBuildStuff 9 ай бұрын

Hi Kurt, I butt it up on the sides and add minimum 3/4" center gap but do recommend 1 inch as these doors will move a bit and with the 2x4 width should have enough clearance to open correctly.

@Kurt9099 9 ай бұрын

@@ILikeToBuildStuff Thank you. I was thinking the same, 1/4" on sides and 1/2" in center of total of 1" clearance.

@joeamato3936 2 жыл бұрын

This is exactly what I was looking for. The price of insulated overhead doors is CRAZY! How large of an opening do you think this design will support? I will have an 8x7, 10x10 and 12x12. The 12x12 worries me a little.

@ILikeToBuildStuff 2 жыл бұрын

Hi Joe, well the front wall is not load bearing so you would not need a big header so I would say you can go as wide as you want but stay with no higher than 8 feet since the walls are 9 feet

@joeamato3936 2 жыл бұрын

@@ILikeToBuildStuff Thanks for the reply. What I meant was, will this frame design support a 6’wide 12’ tall door (for a 12x12 opening) without sagging? I know I would have to add some blocking in for attaching the sheathing.

@ILikeToBuildStuff 2 жыл бұрын

@@joeamato3936 Oh okay, yes it should and you could also run a diagonal turn buckle cable if needed to help keep it square too

@stevecarrillo 7 ай бұрын

great tutorial. will water get in when it rains? do you think there's a way to weather seal?

@ILikeToBuildStuff 7 ай бұрын

I have had some pretty hard rain and no leakage and that was before weather seals were installed with the inside trim. Thanks for watching!

@stevecarrillo 7 ай бұрын

what about dust? I'm going to make one of these this weekend @@ILikeToBuildStuff

@ILikeToBuildStuff 7 ай бұрын

Not much of that either @@stevecarrillo

@user-tc2kd2vr8u 3 ай бұрын

This might be a stupid question but isn't it a security concern that someone could unscrew the hinges and enter the space? Is there a way to improve the security?

@ILikeToBuildStuff 3 ай бұрын

Sure by using carriage bolts instead, this one however is in the fenced back yard. If somebody really wants in they are going to get in. It's kind of like someone installing a huge thick front door with all the deadbolts and locks and have a window right next to it.

@jr6281 Жыл бұрын

Did you ever do a video of the seals?

@ILikeToBuildStuff Жыл бұрын

Hi JR, not yet sorry

@EastMenloPark1650 Жыл бұрын

What did you do with the sills ?

@ILikeToBuildStuff Жыл бұрын

I used the 1 inch foam seals around the doors inside trim and the Garage Door Threshold Seal here are the links for ya amzn.to/3YhfPEd amzn.to/3Hp2i6q

@delecron Жыл бұрын

How did you weatherstrip the bottom?

@ILikeToBuildStuff Жыл бұрын

Hi William, Happy New Year! I used this seal that works great amzn.to/3VBhPFp Hope it helps.

@carterscustomrods Жыл бұрын

So, has there been any sag? I don't care much for those types of hinges here in the city. It sure would've been a lot easier to do it with those.

@ILikeToBuildStuff Жыл бұрын

No not to much at all, I knew I was going to get some sag that the nature of the doors but all in all about 1/4" so I haven't had to add diag wire so far. Thanks for watching!

@vanelladee 6 күн бұрын

may be a silly question, but what is the name of that saw?

@ILikeToBuildStuff 5 күн бұрын

Not silly at all, it's a DEWALT Miter Saw, Single Bevel, Compound, 10-Inch amzn.to/3ViVfVc Thanks for watching!

@bodeine454 Жыл бұрын

We're getting ready to buy a house and it has a commercial building out back. I'm not sure but I think it had a common size 2 door garage door on it but they were having problems with it and so her son removed it so one of the first things I need to do when we move in is install some doors probably about like what you built here. Do you remember how much money in materials it cost for everything building these?

@ILikeToBuildStuff Жыл бұрын

Hi Jeff, if my memory is right I was in the $400 to $500 all in. Thanks for watching I appreciate it!

@bodeine454 Жыл бұрын

@@ILikeToBuildStuff Great, thank you!

@ILikeToBuildStuff Жыл бұрын

@@bodeine454 You bet Jeff

@45valk 27 күн бұрын

I’m screwed, I can’t cut a straight line to save my life. 😂😂😂

@ILikeToBuildStuff 27 күн бұрын

LOL, sure ya can! Thanks for watching!

@jasonmurdoch9029 7 ай бұрын

how come you didn't use vapor barrier?

@ILikeToBuildStuff 7 ай бұрын

In my location it is not required, warm and dry. I do it on house builds though so I guess I could have. Thanks for watching and the input I appreciate it.

@emyhR Жыл бұрын

What is that with the design in it? Looks like bunch of 2x4s together

@ILikeToBuildStuff Жыл бұрын

The doors are made with 2x4s and the drawing is of 2x4s. I hope that answers it because I wasn't sure your meaning.

@emyhR Жыл бұрын

@@ILikeToBuildStuff Oh nah looks like plywood with grooves in it. Sorry I should have said plywood from the start

@ILikeToBuildStuff Жыл бұрын

@@emyhR No Problem, Yes it was T111 siding

@emyhR Жыл бұрын

@@ILikeToBuildStuff THANK YOU!!!!

@davediver463 Жыл бұрын

My house has had T111 siding since being built in 1988. I've received comments from neighbors, friends and family about how bad it is. However, in 35 years I have had no problems.

@ILikeToBuildStuff 2 жыл бұрын

@pbruce-jv5gk Жыл бұрын

6:52 taco bell night with the boys

@ILikeToBuildStuff Жыл бұрын

mmmmmmm Taco's

@longrangevoodoo4480 Жыл бұрын

We are returning to the generation where we have to be men and MAKE our own stuff. Godspeed, folks.

@ILikeToBuildStuff Жыл бұрын

LOL, I have always been that way my whole life and I have made FIRE too! Thanks for watching and the comment and know we all need to get to making stuff!

@ML-ks2lj 3 ай бұрын

Been this way since I could swing a hammer. Born in 1990 one of my most memorable toys was a wood spring set with a small hand saw and tools similar to an erectors set (had those too) and a manual push mower with a spiral reel blade on it I cut the entire neighborhood with. I grew up in a township that was borderline city it was residential mostly built around he high school. I was the only kid on the block to go out and cut grass rake and split wood for he neighbors just for fun if they paid me bonus I could walk to Kroger and get snacks.

@fernandorivera7155 Жыл бұрын

The only dumb question is the one we don't ask, so here it is. What is the clearance between the frame and the door, top, bottom, and side, as well as where the doors meet in the center? I am building one just like yours for my shop but just want to ensure I do it right in every aspect. Thank you for the great video

@ILikeToBuildStuff Жыл бұрын

Hi Fernando, I but the hinge side as close as possible, top I leave 1/8 inch as they will sag a little, the bottom I leave 1/2 inch and center to be able to open with 2x4 frame is 3/4" to an 1 inch

@kalzonenu Жыл бұрын

I was curious on this aswell.

@fernandorivera7155 Жыл бұрын

@@kalzonenu Thank you for your answer and follow-up. Now I have all the details (I think) to build the door. I saved your video, noted the response, purchased the wood, and I am waiting for the monsoons to go away because I need to build it outside. I am also subscribed to your channel. Thanks again.

@ILikeToBuildStuff Жыл бұрын

@@fernandorivera7155 I understand that, we got hit hard with monsoons this year which is great because we need the water. Thanks for subbing to the channel I sure appreciate it.

@richardross119 Жыл бұрын

Brothers/Sisters, if you have an issue with fiber glass insulation irritating your skin. I have a simple solution. I used to run a machine that stuffed fiber glass into automotive mufflers. At the end of week 1 I looked like a full blown method addict. I had scratched my arms to the point they were bleeding. One day a vendor walked by and told me " I used to look like that. I ran a fiber glass machine. I found that shaking baby powder on my arms and neck then patting it in made it impossible for the fiber glass to penetrate my skin."

@ILikeToBuildStuff Жыл бұрын

Great tip Richard, thanks for joining in here we all appreciate it!

@howtodoitdude1662 Жыл бұрын

Same method that barbers use before cutting hair.

@ix_d3monzz_xi135 Жыл бұрын

please start selling shirts!!

@ILikeToBuildStuff Жыл бұрын

Will be very soon, thank you! I appreciate your interest and for watching and joining in here.

@TheOutlawGeneralBacon 9 ай бұрын

Can you come help me?😂.. I want the same thing except with a man door.. to fit a gap 11'6 ×7'3

@ILikeToBuildStuff 9 ай бұрын

You could always frame a walk-through door within the larger door like we door within barn doors

@kevindouglas8768 6 ай бұрын

You did really good until I watched you drill that hole in the concrete. It's going to fill with dirt, but mostly water, then freeze a few times. That slab will have a weak stop forever.

@ILikeToBuildStuff 6 ай бұрын

I sure appreciate you joining in here and the comment it means a lot to me that you would take the time to watch my video!

@kevindouglas8768 6 ай бұрын

@@ILikeToBuildStuff I drilled a hole at the head of the stall and used it as a "dead man" to help me jerk vehicles up the slope and into the garage. When the holes weren't being used, I capped them. Worked great for years. Enjoy :)