Рет қаралды 289
How to Bulker Cement Tanker Trailer Unloading?
#bulkercementtankertrailer #cementtankertrailer #cementtanker
Get more details, please check it.
titanvehicle.com/product/list...
1. After the bulker cement tanker trailer arrives at the destination, park the cement tanker trailer for sale at the corresponding position of the storage tower, ensure that the discharge hose is vertical to the transport joint of the storage tower, and connect the quick connector of the discharge hose to the storage tower The tower's transmission pipe joints are fastened securely.
2. Check and close the feed port tightly, and close the bulker cement tanker trailer exhaust valve, secondary blowing valve, and unloading valve.
3. Start the power device (diesel engine or power take-off) of the cement tanker trailer for sale to drive the air compressor. Let the air compressor speed reach the rated speed (about 900r/min), and inflate the air into the bulker cement tanker trailer tank.
4. When the pressure value of thebulker cement tanker trailer pressure gauge reaches 0.2Mpa, open the secondary blow valve, clear the pipeline, and then open the cement tanker trailer for sale discharge valve to start unloading.
5. When the pressure gauge of bulker cement tanker trailer drops to 0.02Mpa to 0, cut off the power, stop the operation of the air compressor, close the secondary blowing valve and the unloading valve, open the exhaust valve, and the unloading is completed.