HOW TO: Burn Your Screens for Screen Printing at Home

  Рет қаралды 330,082

Studio Moxy

Studio Moxy

Күн бұрын

This is how I burn my screen printing screens at home. I use emulsion from Anthem Screen Printing, Inkjet transparencies and a homemade exposure unit. It’s really easy, a little messy and a LOT OF FUN.
__
If you want more detailed information about how to burn a screen at home check out my blog.
studiomoxy.com/index.php/2017/...
__
Instructions on how to build your own exposure unit can be found here:
• How to build an EXPOSU...
__
Want to buy the same screen printing supplies I use? Go here (Not sponsored or affiliate linked):
www.anthemprintingsf.com
screen printing emulsion:
www.anthemprintingsf.com/WR-2...
emulsion remover:
www.anthemprintingsf.com/Envi...
degreaser:
www.anthemprintingsf.com/Pink...
emulsion coater:
www.anthemprintingsf.com/Dual...
screens:
www.anthemprintingsf.com/Alum...
__
OTHER PLATFORMS
BLOG // www.studiomoxy.com
INSTAGRAM // / studiomoxy
TWITTER // / studiomoxy
DIY & HOW-TO CHANNEL // / studiomoxy
__
Not sponsored.
__
Please note that all projects seen on my channel must be completed at your own risk. I do not take responsibility for any harm or injury that may occur. Be safe!

Пікірлер: 254
@mateorenai
@mateorenai 5 жыл бұрын
you did a pretty good job there.
@manuelmtb
@manuelmtb 6 жыл бұрын
Thanks for share... I use to work in a big industrial screen printing shop some years ago, I have project to start a small SP local business. Your tips are so practicaly, low price and easy to do.
@dianeuranowski3694
@dianeuranowski3694 3 жыл бұрын
PS: How anybody could vote a thumbs down on this is beyond me! Someone takes the time to share their knowledge to help others have success and the best they can do is click a thumbs down. Brilliant! I wish everyone would stop judging sooo harshly and just say thank you already!
@fahey5719
@fahey5719 5 ай бұрын
Poor quality advice. Does not show end result: fully washed and dried screen because it failed..
@vilefiles3489
@vilefiles3489 5 жыл бұрын
The screen shouldn’t dry upwards. You want the emulsion to evenly dry. Lay it flat with the T-shirt side down. I prop mine up by putting cups in each corner of the screen.
@dianeuranowski3694
@dianeuranowski3694 3 жыл бұрын
Great Video! I've read about screen printing, and had the things to do it for a long while. Your video helped to to plan very clearly how I will set up my things in my dark little garage, and I thank you!
@MrVolreg
@MrVolreg 6 жыл бұрын
i just start working at a silkprint place and im watching all the tutorials i can find ! thank you for this great video ^^
@fahey5719
@fahey5719 5 ай бұрын
Very poor video.
@antonshkabara3090
@antonshkabara3090 6 жыл бұрын
Great to see that Avasva has new instructions to save my money and energy to build it.
@josephpopa9425
@josephpopa9425 3 жыл бұрын
you are so creative and think outside of the box. I love it
@zacharybottoms3968
@zacharybottoms3968 4 жыл бұрын
quick question what wattage is your light? i was planning on using just a 500w halogen but a uv light is a good, much faster option just not sure how much juice i need.
@Hotboy_1hunnid
@Hotboy_1hunnid 2 жыл бұрын
That was awesome. Everything homemade and it got the job done. 🙌
@yourunclesam6780
@yourunclesam6780 5 жыл бұрын
Sutdio Moxi:Really important video. The intention of sharing knowledge with others is appreciated. Thanks for sharing your knowledge. I have learned a lot from your video. I want more videos. LOL
@pinheirofilho4100
@pinheirofilho4100 5 жыл бұрын
Parabéns pela bela demonstração!!!
@miamitreasurehunter
@miamitreasurehunter 3 жыл бұрын
Thanks. I have the same light as yours but didn't realize the glass was a UV blocker. My fist attempts bombed until I saw your setup. Followed your steps and my 1st successful screen print on a T-shirt 😀 Thanks for sharing !!
@ricHarder
@ricHarder Жыл бұрын
is that a uv light ?
@kirbylynx
@kirbylynx 9 ай бұрын
What light is that
@l.l2437
@l.l2437 3 жыл бұрын
Wow great job...you made it really easy to do! Thank you
@xdeadyoungx
@xdeadyoungx 6 жыл бұрын
Nice video, straight to the point!
@djkirkdigglerusn5476
@djkirkdigglerusn5476 6 жыл бұрын
Love your video can you tell me what chemicals you use for cleaning and where you buy them please :)
@itsdeeday
@itsdeeday 5 жыл бұрын
Thanks for making it look pretty easy!
@titandigitizingembroideryd7051
@titandigitizingembroideryd7051 4 жыл бұрын
kzfaq.info/get/bejne/p7SjiMl9yLOqaIE.html
@josuejorge4792
@josuejorge4792 3 ай бұрын
Awesome awesome awesome . Just found your channel, I’ve done a lot of searching on KZfaq about screen printing. You’re tutorial is the best by far
@davidfrere4522
@davidfrere4522 3 жыл бұрын
Good job! Thanks for taking the time to share.
@iglesiaelrenuevo5882
@iglesiaelrenuevo5882 5 жыл бұрын
Hello, I would like to know what is the printer that they use and what kind of ink to ink the image, thanks
@xderiwx
@xderiwx 6 жыл бұрын
Was that a pint sized emulsion container? How long does one of that size usually last you? 10 screens? Thanks!
@CandSMINING
@CandSMINING 5 жыл бұрын
Thanks for the info and sharing your knowledge.
@154g
@154g Жыл бұрын
I have aeen some tables that have the light under the table, does it make a difference which 1 is used?
@akolix
@akolix 4 жыл бұрын
Hi love, can i ask you witch light you using? Is it a uv lite or normal light from garage? How many Wats is strong light? Thanks for your answer.
@JackSmith-ud9bg
@JackSmith-ud9bg Жыл бұрын
Great method for placing the negative on the screen. Thanks. i'll try it.
@ANAGOMEZ-of3br
@ANAGOMEZ-of3br 2 жыл бұрын
Thanks for the video, question... What's the watts on the light you are using?
@solomontesfaye3410
@solomontesfaye3410 4 жыл бұрын
Hello Ms. would you please tell me the mixing ratio of powder sesitizer with hot water and the amount of liquid senitizer with emulsion?
@Averroes1
@Averroes1 5 жыл бұрын
How thick is the glass you use? Thank you
@trebor8nat
@trebor8nat 4 жыл бұрын
nice video how far is the lamp from the screen looks like 16 inches apart?
@vladpierre2694
@vladpierre2694 3 жыл бұрын
Is the peace of black foam helpful in getting a good exposure? How?
@kevmonster7238
@kevmonster7238 4 жыл бұрын
after the image is burned on the emulsion, you can clean it off with water and the image will pop up or do you use anything else?
@geraldcodrington7816
@geraldcodrington7816 6 жыл бұрын
Thanks for sharing, I'm learning.
@AliHassan-qc8wt
@AliHassan-qc8wt 5 жыл бұрын
I know screen making
@joelnickerson6739
@joelnickerson6739 2 жыл бұрын
Hi. Nice job just one question. Do you only put emulsion on the back of the screen? I thought it had to be applied on both sides.
@captainrecycle4672
@captainrecycle4672 4 жыл бұрын
Hi! I'm thing to buy a screen printing press with register, l'm to began to do screen printing, l have small room, so don't know what printing press to buy what do you recommend?,l hope you answer thanks
@tapinwithted
@tapinwithted 3 жыл бұрын
Where can I get that scraper?
@daisyreynero6196
@daisyreynero6196 4 жыл бұрын
You gave an exposure time. Need to know what type of emulsion you used?
@vladpierre2694
@vladpierre2694 3 жыл бұрын
What speedball block out are you using?
@shoriantrax
@shoriantrax Жыл бұрын
Amazing video..thank you for sharing..quick question to YOU or anyone in the comments how many watts is your lamp for burning the screen ?
@notoneperson6
@notoneperson6 6 жыл бұрын
BLESS YOU FOR THIS VIDEO !
@cristianc3629
@cristianc3629 2 жыл бұрын
Do you know your dimensions for the burn light setup?
@MYJOURNEYTV0812
@MYJOURNEYTV0812 4 жыл бұрын
what kind of light did you use?
@kisanputt8753
@kisanputt8753 2 жыл бұрын
Hi, whats your lamp watts, distance between screen and lamp. How did you calculate time?
@amyhumphrey2389
@amyhumphrey2389 3 жыл бұрын
You were able to do this with a simple transparency? Like the kind we used to see in school when we were kids?
@tiborhalasz4677
@tiborhalasz4677 Жыл бұрын
Hi Moxy, I would like to ask, which printer to use for create the film positive? Laser printer is good to this task or need other solution? What is your power of your lamp? Thanks!
@BigzoTv
@BigzoTv Жыл бұрын
Does the uv light have to be a heat light as well ?
@mtikwah
@mtikwah 6 жыл бұрын
Greetings from South Africa. That's really a good job there. I'm actually amazed by your homemade screen burner and am wondering if you could help me with the plan. Wish to build one like yours.
@zeekalowe931
@zeekalowe931 3 жыл бұрын
Robertdiaztv
@zeekalowe931
@zeekalowe931 3 жыл бұрын
kzfaq.info/get/bejne/arVzf7OJ2L_VfHU.html
@kathleenthompson3676
@kathleenthompson3676 Жыл бұрын
What do you use to print your design on? What kind of paper?
@smhaque2021
@smhaque2021 4 жыл бұрын
Thanks for shearing Whats the price of these machine
@lisapupillo1724
@lisapupillo1724 2 жыл бұрын
Do you know if there is an adhesive that you can apply to the back of the stencil so that the finished stencil can stick to the surface you're stenciling on?
@hashtagcircus5980
@hashtagcircus5980 2 жыл бұрын
The stencil is a clear film with a black image printed onto it. It’s not your typical cut out stencil. So the light burns the clear and all the other parts and hardens the emulsion, then you rinse out what didn’t get hardened by the light aka the black “stencil” or pattern
@TufdogsPlace
@TufdogsPlace 7 жыл бұрын
Very cool, I didn't know how that was done...
@StudioMoxy
@StudioMoxy 7 жыл бұрын
Thanks! It's a pretty simple process when you break it down. Hope it helps anyone that wants to learn how to do this too.
@djfatstax2400
@djfatstax2400 4 жыл бұрын
hows the printing are you still doing it
@txsviking
@txsviking 7 жыл бұрын
There is a lot to it. Great work.
@StudioMoxy
@StudioMoxy 7 жыл бұрын
Thanks! There is a lot to the process. More vids coming soon!
@REKSOSTUDIO
@REKSOSTUDIO 7 жыл бұрын
Your video is very useful for me
@vladpierre2694
@vladpierre2694 4 жыл бұрын
Is there a reason you use a "black" peace of foam, and could you also burn the street from the other side of you wanted?
@robertod0821
@robertod0821 4 жыл бұрын
Great video. What kind of ink or paint do you use ?? What brand ??
@noahjohansen3050
@noahjohansen3050 3 жыл бұрын
What is the spatula used for
@romancrisologo7470
@romancrisologo7470 3 жыл бұрын
what watts your using maam for burning ??
@dhruvprataptanwar46
@dhruvprataptanwar46 Жыл бұрын
Can you use any bulb or does it have to UV?
@jonnybigD420
@jonnybigD420 5 жыл бұрын
What kind of screen do you use?
@drakenzy4220
@drakenzy4220 3 жыл бұрын
Hello! What is the name of that ink ? Im from Latvia
@coreyholden7995
@coreyholden7995 3 жыл бұрын
What kind of emulsion was that?
@dasmegacool
@dasmegacool 5 жыл бұрын
Under or over how many bodies are in the freezer?
@clarencewilley6083
@clarencewilley6083 5 жыл бұрын
Howl well does the press you have work as far as registration?
@StudioMoxy
@StudioMoxy 5 жыл бұрын
It takes a lot of effort but eventually it will register.
@imaroadrunner7384
@imaroadrunner7384 3 жыл бұрын
What mess are you using 110 ?
@oax2919
@oax2919 5 жыл бұрын
I have problems with chromaline pc701 emulsion, I use a 500 w halogen light. I have been given it 30 seconds on every section from a sheet of ten. But at the end of exposure it didn't come out or falling ..help pliz
@fahey5719
@fahey5719 5 ай бұрын
You over burnt it.
@154g
@154g Жыл бұрын
Emulsion is coated on 1 or 2 sides?
@eightsixsoldier3901
@eightsixsoldier3901 5 жыл бұрын
can i buy a screen from you? iwhats your pricing
@theznooker
@theznooker 6 жыл бұрын
i bought screen printing kit and i got only 3 yellow/green/red color, and i dont have one of those that people mix with water and let it dry and then wash it etc........ do i have to buy one of those too ? what is it called ? tnx
@StudioMoxy
@StudioMoxy 6 жыл бұрын
It sounds like you bought ink (the red/yellow/green) which you will need when printing. But you need emulsion to make the stencil on your screen. You can buy emulsion at craft stores that sell screen printing supplies or you can check out the description of the video I listed the supplies I used along with a blog post. I hope those help you.
@Dmite_The_Great_6558
@Dmite_The_Great_6558 10 ай бұрын
Nice video very informative! Thanks you’ve gained a new subscriber ❤
@marierodriguez6569
@marierodriguez6569 5 жыл бұрын
what kind of paint did you use to paint the foam black ? Can I just use a foam without paint ?
@820light
@820light 4 жыл бұрын
Put the foam in a black tshirt
@queso5131
@queso5131 5 жыл бұрын
Best video!!!
@enzprintco.8625
@enzprintco.8625 5 жыл бұрын
Great video! How long have you been doing this? Where are you located? :)
@DMDArtStudio
@DMDArtStudio 3 жыл бұрын
Wow, I have a lot to learn here
@bartonyount186
@bartonyount186 5 жыл бұрын
Love your videos. I've learned much. In fact I built an exposure light exactly like yours. Which, brings me to my question. How do you figure out how long to expose the emulsion? In this video you timed it at 2 minutes and 30 seconds. Is that the perfect time? What happens if I expose it longer? Thanks for the advice. Bart
@StudioMoxy
@StudioMoxy 5 жыл бұрын
Thank you. That's a great question. I printout this document and use it to time test the emulsion. Over time the light will become weaker and if you keep the emulsion for longer it will need some time adjustment. Use this doc and start at the 8 minute mark. Use something dark to cover the other times and every 30 seconds reveal more of the sheet until you get to the 30 second mark. Turn off the light and wash out the screen. Then you'll see the best time for your light and emulsion. static1.squarespace.com/static/5c22ebdd85ede1c92284f8b1/5c293f1d8a4134666a4881b1/5c293f238a4134666a488319/1546207011556/time-test.pdf?format=original
@bartonyount186
@bartonyount186 5 жыл бұрын
@@StudioMoxy Thanks for the time test sheet. I'm somewhere in the 2:30 to 3:00 minute range. Not surprising considering I use the same type of light source as you. Question: can you expose a screen for too long? As I ask that question it occurs to me that the correct time is a balance between exposing the emulsion just enough to harden without the light going through the black ink on the negative. Have you tried 3:00 minutes? Thanks Bart
@StudioMoxy
@StudioMoxy 5 жыл бұрын
Barton Yount yes you can expose a screen too long. When you do this, you will see that the screen won’t wash out. You’ll need to remove the emulsion and start the process over again. Just keep testing till you dial it in.
@johnmav8309
@johnmav8309 4 жыл бұрын
Thank you!
@Zaim-group
@Zaim-group Жыл бұрын
What is the strength of light and is the light yellow?
@georgeswanepoel2144
@georgeswanepoel2144 4 жыл бұрын
Hi, thought i would share. I started screen printing 2 days ago, took weeks/months prepping getting all my info etc. This video helped me so much thank you. So with the specs of your exposure unit, i made the same one but i only have a 20w light (20W, 1600LM, 4000K, 230V-50Hz), and my exact exposure time is 1 hour, 2 minutes, 30 seconds. Thought this exposure time might help someone that only has a 20W light.
@rifaldimarzuq7703
@rifaldimarzuq7703 Жыл бұрын
thank you:)❤
@petermellen7474
@petermellen7474 5 жыл бұрын
Great work.
@petermellen7474
@petermellen7474 5 жыл бұрын
How’s your business still doing? I was thinking of getting started myself
@richardniswander9030
@richardniswander9030 2 жыл бұрын
Do u have a drawing of your exposure unit
@MediaJunkie666
@MediaJunkie666 Жыл бұрын
What Burn Lamp Did You Use?
@koilover7740
@koilover7740 11 ай бұрын
Love your video. ??? How many watt your lightbulbs
@LittleBigWelsh
@LittleBigWelsh 2 жыл бұрын
What light is that?
@FemiKolawole
@FemiKolawole 5 жыл бұрын
Good job 👍🏾
@bigjeyc8957
@bigjeyc8957 6 жыл бұрын
Can this kind of light be use for halftones?
@StudioMoxy
@StudioMoxy 6 жыл бұрын
Yes, this light can be used to burn halftones.
@yousifdelvalle4162
@yousifdelvalle4162 6 жыл бұрын
hey, not sure if any one asked this yet but what does the foam do? Why don't you just flip your screen around and place your glass on the other side of your screen with the transparency underneath?
@sarahpickerill8829
@sarahpickerill8829 6 жыл бұрын
Hi Yousif, The foam is to give the screen some support and also to block any light that might come from underneath that causes a ghosting effect. I suppose you could try to burn the screen the way you suggested, but I’m not sure how well it would work. Try it out and let us know how it turns out. Thanks!
@natgreenable
@natgreenable 4 жыл бұрын
thank you so much for this video?
@convert-a-net2898
@convert-a-net2898 6 жыл бұрын
what is the wattage of the work lab and how far was it from the screen?
@StudioMoxy
@StudioMoxy 6 жыл бұрын
The work light is 500 Watts, but the cover is removed. Otherwise the UV light won't burn the image into the screen. The light is positioned about 16 inches from the screen. If you're looking to build one yourself, check out this video from DeadSeaProductions. I used this video to figure out how to build mine. kzfaq.info/get/bejne/act_o7hqkpu4in0.html
@ellenhenderson8042
@ellenhenderson8042 5 жыл бұрын
How did u learn
@chrispalmer1255
@chrispalmer1255 4 жыл бұрын
Moxy, please help!!! I coated my screens and put them in my cabinet to dry. That was 2 days ago. Today, I opened the cabinet to burn them but the emulsion wasn't dry. Also, it had all coagulated in a circle near the center of the screen and there were drips. I followed the directions on my emulsion and I followed your video... I'm thinking maybe there was no airflow inside my cabinet and that's what kept them from drying? I'm thinking about washing them, recoating, then letting them dry outside of the cabinet with a fan on them? What do you think?
@StudioMoxy
@StudioMoxy 4 жыл бұрын
That's a good idea. It will take trial and error to get the process down. Humidity may have been a factor and lack of airflow. The emulsion may have been a bad batch, but you'll have to try different things and troubleshoot it to get it to work for you.
@roysugoi2306
@roysugoi2306 5 жыл бұрын
Where do you buy the glass plate without UV protectant? Thanks in advance
@StudioMoxy
@StudioMoxy 5 жыл бұрын
I bought the glass at Home Depot. They cut the glass to the size I needed.
@10secondfilmschool
@10secondfilmschool 5 жыл бұрын
Do you recall where you got the foam and whether or not you needed to cut it to size yourself?
@StudioMoxy
@StudioMoxy 5 жыл бұрын
The foam was from a craft store (Joann) and I didn't have to cut it because it fit the size of my screens. If you find foam that is not the right size at that craft store, they can cut it to size for you.
@10secondfilmschool
@10secondfilmschool 5 жыл бұрын
Studio Moxy thank you!!
@anitaramirez163
@anitaramirez163 6 жыл бұрын
Did you add emulsion on both sides of the screen
@StudioMoxy
@StudioMoxy 6 жыл бұрын
Anita Ramirez I don't coat both sides. The emulsion squeezes through the screen, so I try to scrape it down with the coaster to get a thin even coat on the screen.
@fahey5719
@fahey5719 5 ай бұрын
You must coat on both sides, then remove excess, again on both sides, to guarantee even covering and a thin layer. Then dry it horizontal, with t-shirt side down.
@drecoop495
@drecoop495 5 жыл бұрын
Is the glass required or can I do without?
@SpiderF27
@SpiderF27 5 жыл бұрын
If you want a detailed and sharp edges for your print yes. The glass press the positive against the mesh evenly and tide.
@saucedonkey88889
@saucedonkey88889 5 жыл бұрын
What is Speedball Blockout? is it an actual paint or tape?
@StudioMoxy
@StudioMoxy 5 жыл бұрын
It's like a paint. It is the Speedball brand and the product is a blockout liquid. You would paint it on and it will come off the screen when you remove the stencil with a power washer. It doesn't come off as easily as the emulsion with the emulsion remover.
@larrydavid2812
@larrydavid2812 6 жыл бұрын
After you coat your screen it should be laid horizontal print side down not against your wall what your doing may work for you but it’s not the correct way to dry a screen after it’s been coated, also depending on what emulsion your using you want to coat the screen 2 times on the outside and 2 on the inside so you have even consistency and it will help with exposing your screens. Just some pointers for you I screen print for a living been doing it 20+ years
@rig2037
@rig2037 2 жыл бұрын
Thanks mane
@salamakwamire9253
@salamakwamire9253 6 жыл бұрын
hi can you teache me how to make my only emulsion
@StudioMoxy
@StudioMoxy 6 жыл бұрын
Hi Salama Kwamire, Check out my other video that talks about creating a stencil. I go into making emulsion a bit in this one. kzfaq.info/get/bejne/maubppmZs67Vl30.htmlm44s You can buy the same emulsion I use here: www.anthemprintingsf.com/WR-25-Water-Resistant-Photo-Emulsion-QUART-p/wr-25-qrt.htm
@mindglow3977
@mindglow3977 4 жыл бұрын
very nice
@travelingvashishth6932
@travelingvashishth6932 5 жыл бұрын
Hi I have problem during exposure with halogen same as u did,Is any change in emulsion
@StudioMoxy
@StudioMoxy 5 жыл бұрын
Did you make sure the UV cover on the light was removed? You may want to do a time test with your emulsion by using a sheet of paper and moving it every 20 seconds to reveal more of the image to see your exact best exposure time. Make sure the emulsion is new and mixed properly as well.
@travelingvashishth6932
@travelingvashishth6932 5 жыл бұрын
Ya Sure I removed and I took new emulsion 😕
@StudioMoxy
@StudioMoxy 5 жыл бұрын
Okay, removed UV cover and new well mixed emulsion should work. You should now do a time test with your emulsion to make sure that you have the correct amount of time for your burn. It can vary from brand of emulsion to brand and also if your light is new/or old. The brightness can make a difference. Check out my blog for a little more detail about time tests on step 7. studiomoxy.com/index.php/2017/08/17/burn-screen/
@travelingvashishth6932
@travelingvashishth6932 5 жыл бұрын
Thanks😊
@irwinr5804
@irwinr5804 6 жыл бұрын
.Exelente
@magibomagibo4451
@magibomagibo4451 6 жыл бұрын
wants to know the size of your screen frame
@StudioMoxy
@StudioMoxy 6 жыл бұрын
Emmanuel Amihere the screen is 18" x 22"
5 Screen Making Mistakes To Avoid | Chromaline Screen Print Products
8:34
Chromaline Screen Print Products
Рет қаралды 9 М.
It's easy to burn an image into a silk screen
14:41
Bob Mongiello
Рет қаралды 361 М.
НЫСАНА КОНЦЕРТ 2024
2:26:34
Нысана театры
Рет қаралды 1,3 МЛН
A teacher captured the cutest moment at the nursery #shorts
00:33
Fabiosa Stories
Рет қаралды 51 МЛН
World’s Largest Jello Pool
01:00
Mark Rober
Рет қаралды 99 МЛН
How to Screen Print using Vinyl
9:37
Sugar Bee Crafts
Рет қаралды 1,3 МЛН
Photo Emulsion Method
6:39
SpeedballArt
Рет қаралды 747 М.
Screen Print with me ✸ HOW I BURN A SCREEN ✸ Printing at home ✸
5:07
Adriana // Fromlinetoline
Рет қаралды 10 М.
How To Expose Your Screen With The Sun | Chromaline Screen Print Products
5:38
Chromaline Screen Print Products
Рет қаралды 8 М.
How I Screen Print Without Photo Emulsion!
18:32
Megan Rose Ruiz
Рет қаралды 142 М.
How to burn a screen? ( NorCal Screen Print Supply Demo )
5:38
NorCal Screen Print Supply
Рет қаралды 3,3 М.
My screen printing tips to coat, burning,  and washout screens.
26:55
Heart and Hustle Printing
Рет қаралды 81 М.
How to screen print t-shirts at home (DIY method) | CharliMarieTV
7:07
CharliMarieTV
Рет қаралды 2,4 МЛН
НЫСАНА КОНЦЕРТ 2024
2:26:34
Нысана театры
Рет қаралды 1,3 МЛН