How to Calibrate / Set a Hobbywing ESC

Рет қаралды 32,844

3 жыл бұрын

How to calibrate a Hobbywing esc / speed control. These are all the steps for the throttle range calibration on a Hobbywing esc. I have used this method for various Hobbywing brushless speed controls such as the ez run 80 amp , xe run 80 amp , ez run 150 amp , xe run 150 amp , max 8 and max 5 and others.

Пікірлер: 27

@paulcook8316 2 жыл бұрын

Helped me out,thanks for sharing.worked on the ez run esc and 4000kv HB combo with slt 3 TX/rd.👍

@speedstersports 2 жыл бұрын

Great 👍

@RockerRoxy 3 жыл бұрын

Great tutorial! 👍👍👍👍👍 Happy holidays ❤️❤️❤️❤️❤️

@speedstersports 3 жыл бұрын

Thank you for watching, happy holidays to you too

@RockerRoxy 3 жыл бұрын

@@speedstersports 🤗😘🤗😘🤗

@GyuHobbyRC 3 жыл бұрын

Good job watching great videos

@speedstersports 3 жыл бұрын

Thank you for checking it out

@wilsix5173 2 жыл бұрын

GREAT VIDEO. TANKS

@speedstersports 2 жыл бұрын

Thank you too!

@Hirthirthirt 2 жыл бұрын

We tried this a million times today with an E-Revo TQI. We could'nt get this to work. We saw a HW-Video and tons of people in the comments said the same. They never get the green light-feedback, no matter if its for neutral, throttle or reverse. Any idea?

@speedstersports 2 жыл бұрын

What motor are you using? It's possible you have the wires plugged in the wrong order. I have not tried it with a TQI radio but you might need to check if throttle is on reverse.

@sandiegobashbrothers 2 жыл бұрын

Got it! Just don’t have reverse?? Thanks man!

@speedstersports 2 жыл бұрын

I've noticed with some HW speed controls the reverse doesn't always work. After throttle range calibration, I think I would turn the throttle trim slightly back and this would help fix the problem.

@hubertarcher3887 3 жыл бұрын

How do you switch reverse throttle on and off??

@speedstersports 3 жыл бұрын

You can switch off reverse throttle to have brake instead. If that's what you're talking about, you can do that pretty easy with the program card/box.

@MrRdizzle01 3 жыл бұрын

In a brushless set up it will be fine switching positive and negative wires to either choose fwd or reverse position but in a brushless sensored motor that would be a issue Just thought I'll share that in case Sombody isn't aware that sensored motors can not switch positive and negative wires could cause issues

@speedstersports 3 жыл бұрын

Thanks for sharing, I forgot about that.

@phil_4young 2 жыл бұрын

Having issues. Red light keeps flashing on me. I'm unable to calibrate. I'm using a dumborc receiver and transmitter. A hobbywing sc8 120 amp ESC in a 4s arrma granite with a stock motor.

@speedstersports 2 жыл бұрын

Make sure your ESC is plugged into channel 2 on the receiver. Also make sure your motor wires are plugged into the proper order on your ESC. Sometimes when using different company ESC/motor combo the colors will not match on the wires from motor to ESC.

@justinraynes1043 2 жыл бұрын

Try turning the throttle trim knob, once it's set to 0% or neutral, the flashing red light should stop and it will connect

@robgorman6672 3 жыл бұрын

What kind of tires are those

@speedstersports 3 жыл бұрын

They are Team Associated Nomad General Tires.

@king-korestudio6311 2 жыл бұрын

Instead of removing the spur gear, just set it up on a block or a rc truck stand.

@speedstersports 2 жыл бұрын

You can do that too. What I usually like to do is slide the motor away and tighten the screws. This way the the gears are still on and there is no power going to the drivetrain.