This guy annoys me.

Ryan, you’re legitimately a legend in today’s world. There’s a lot of millennials who need to find this channel. One day this channel will get a lot of recognition. It deserves it anyways. IMO.

This is absolutely the best video I have ever seen explaining a cam swap with all the other items that need attention!! Great job on showing it!!

This video has been my rock through my upgrade. I also just put it on when I'm going to bed because I find it relaxing

excellent straight forward info on the bearing/runout with no gaslighting.... thank you!

Man, I love watching your videos. And it kills me how easy you make things look. Thanks.

Another excellent video, thank you. Ryan, you have a talent for comic comments that makes these DIY's a lot of fun.

It is great to watch a video where the guy doing the work can explain what he is doing, plus knows what he is doing. Kudos Ryan!!

yours was not the first cam change I've seen, But the most senceical and entertaining I absorbed a load. Thanks

Realest dude I’ve seen in a long time. And he knows his shit. Well done

Kick ass! My 08 dyna is at the shop right now, thanks for the tip on the crank runout because I was going to ask them what it measured!

Awesome video guys! Im ready for that night train rebuild series!

Literally getting ready to do this on my twin cam 103. Sat down and took notes the entire time. Your insight and tips are things I can’t find anywhere else. Thanks dude.

My cams are getting done in a couple of days. I’ve been looking at the jobs done just to see what goes on. My friend, you have one hell of a channel and a master class in presentation! 👍🏾

This is the only video on you tube that show the bike start up after a cam change great video mate thank lot trick showing how to get around things and same bit money thank you for this video mate.

Great Video, I learned A LOT! look forward to more of your How-To content!

Definitely do more of these in depth install videos! Love to learn and watch these videos on KZfaq but there always long and boring as hell!! Best install video on KZfaq, keep it up Kruesi and crew!! Great video/editing too!

I really respect the way you teach in a no-nonsense fashion! You pass on so much info without the BS and you're funny as hell too in a low key way. I've been pulling wrenches for over 40 years but bike wrenching is new to me, I learned a lot from your vid and will be doing this on my 04 Heritage soon. THANKS!

Ryan's videos are always fun and full of how too's. really appreciate all the years of tribal knowledge and experience you share on your vids! Cheers from Arkansas- keep ripping bro!

Hell yeah! I apply that rule everywhere. Your work station says a lot about you. Keep’em coming brother! Great work

I think my head would explode with the amount of knowledge this dude has on motors

I'm preparing for a drop on kit hone install. Your insight is valuable, and your sense of humor bang on! Thanks for the help! Love from Georgetown, CA

Fantastic vid. Hey man, I appreciate the knowledge and straight forward approach you have on these. Looking forward to more great content! Notice: when he's putting the bolts back in the cam chest, where he identifies that if the manufacturer says loctite he does that, or if they say assembly lube or oil, what the manufacturer says, he does THAT! GREAT point to be attentive too is bearing explanations For anyone complaining, THIS IS SOME OF THE BEST EDUCATION YOU CAN GET!

Ryan is truly one of the OG's. Wouldn't personally attempt to do this on my bike, but I still dig watching it get done. Next time show the bike running! A before and after would be cool.

Thank you for this video, I plan on installing cams on my 2007 FXSTC TC96 when I switch to a 2-into-1 exhaust during the winter, so I am starting my learning now in June. I work in a Harley shop, so when the techs are doing cam jobs I try to observe what they are doing, but I am really busy. The shop charges 8 hrs of labor to do a cam job, and even with my discount, that is out of my reach. So just like everything else, I need to learn to do it myself. Right now I am gathering the tools needed, so your tips on the essential tools and the things I can get a Harbor Freight, really helps this poor guy. I don't even have a garage, so I gotta figure out where I will be doing the work, I will probably build a shed to do it in. I got a garage planned, but the cost of materials now doesn't allow it. again thank you for this kind of videos, the way to explain things really worked for me. I am mechanically inclined, I just don't have the knowledge or experience on big twins, like I do on other things.

I can't put into words how much I appreciate you making this video! I can read a shop manual over and over and only feel so confident tearing a motorcycle apart. I will deffinately be rewatching this tomorrow while I rebuild my cam chest. Thank you and your crew for the work you put in making these videos.

Great videos! I’ve been following you for 10yrs💪👍👍

informative...You're good! I do my own wrenchin and not many I would allow to touch my bikes but You are clean and thorough and do it right..

doubt i will ever change a cam but i watched the entire video. awesome tutorial.

I work at my shop all day then I watch this channel at night to relax 👍👍

Man that was a really good vid. I’m just dipping my toe back in the water on Harleys. Haven’t had one since ‘93. I’ve been catching up on what is what from year to year before I run off and buy someone else’s mess. Super helpful.

I was looking for supplemental info on cam change and found your videos. I’m a student at MMI and man, I learned a lot just watching this, Thanks, I’m surely subscribing to your channel.

You’ve given me a ton of confidence to work on my own shit and get wild on my dyna, thanks homie

I am novice when it comes to the twin cam engines. I am EVO guy. But this video was very informative. Thank you for the insight. Cool.

Just a matter of time before this channel blows up. Great content!

Honestly one of the best install videos I’ve ever seen

Wow that runout is unseen. Really enjoyed this one. Cheers Also think that song was Tokyo from fast and furious Tokyo drift.

There’s two things my dad drilled into me when I was a kid. Always have a way to tell time and always carry a knife!

Man wish I watched this before I bought a cam locking tool... Great video dude, you have helped me out!

Hey Krusei, another great video. I've been working on gas turbines and Harleys for over 40 years and I am truly impressed with your technique & skills. I was so happy that you didn't tell people to use the Red Loctite. BTW I never used crank to get high - I just liked the way it smelled.

you helped me get my 06RK's cam chest reloaded--thank you for your videos

Ryan you are the Dominic Toretto of the Harley world ! respect brother!

That screwdriver trick for hold the gears is definitely a great hack. Thank you sir 👌

This is definitely the best video out there and entertaining to, great!!!!

Thank you, this is a great video. Keep kicking ass.

Great video, enjoy the long form content.

love your work,buddy..

I did all that on my 02 fxd...Yett'..man I wish I could have watched this vid...You really were and are helpfull...Thanks for the mem or ee's...You rock'...

Great video! Glad to see you doing well🤘

Awesome videos, love the humor!

Good job Ryan!!!!

Thanks for making these videos man! Planning on putting a Fueling 574 in my 2008 SG, after watching this I'll feel better tackling it myself.

Great job! Done Right..I like that!

Great video! Love Feuling!

Great video. There are a lot of little things you threw in there that just make sense, but I sure wouldn't have thought of it... You have some skill there, dude. Subscribed and I'll pass your channel on to some of the other knuckleheads I ride with. Thanks.

Cool video I'm definitely gonna have to take a ride out to your shop

I heard he is a really nice genuine dude LFG Ryan K keep up the great work bro 🔥🤘🏼🔥

Great video. No BS and to the point.

Really appreciate your videos, great that you share your knowledge. Ride on.

Morning…one hell of a video and a channel! Seriously real world no BS style is awesome great content keep up the excellent work you are making a difference my brotha! Be well…Mark G

Good job bro, outstanding !

Homie teaches in an hour what it takes a week to teach at MMI. Trust me. I went. Been there, done that, got the t shirt.

Man you definitely know your stuff. Funny as hell too

Nice touch with that tank lol … you have to get up a little bit earlier though to pull the wall over my eyes 👀!! I’m just messing with you guys as always cheers from Sacramento

Thanks. Awesome video and instruction. 🤙🏼

Thanks a bunch man….the best so far….with a bit of comedy

thank you for the video,exellentissime,merci ryan continuez comme sa

Great Video! Thanks!!!

😮 Life in the fast Lane. Sure to make you lose your mind 🏁

I'm glad you showed where that extra screw goes I have the same cam plate doing a upgrade. Warning must be 18 to watch this video.

Guy knows more niche things about harleys than anyone I know

Great vid - Cheers.

Awesome job

Dude! So informative and laughed my ass off the whole video 😂😂

Awesomeness love it

I,m an old fart and I love your videos. No bs just get it done. Right

Did the zip tie tire trick over the weekend . Works Rad !

Good video... trying to get my balls to grow big enough to drop in some Wood Performance TW222 cam kit in a 2008 Rocker C with a 96B. Just gotta study up little more on the push rod procedure. Subscribed

Great video sir. Ive watched the same process from difft people just to get it burned into my brain housing group. That way, when i do it myself, i have some knowledge.

Bad ass work 🤘🏻🤘🏻

Awesome video man thank you

Assalamualeikum u are a best Doctor brother alhamdulillaaah u are a light of that candle soll of Harley Davidson Sir

Your videos rip! Love the content dont change anything about it

Great stuff, thanks.

Very F'n cool video, no BS, to the point, but detailed. liked it..........done, subscribed..........done!

Great job 🤙

The syringe trick works great did the same on mine.

Excellent value! . FNA!!

Just wondering if those torrington bearings are a bit tight to get to spin with your fingernail where the old ones spun really free. Just debating pulling these new torringtons back out or not.

Good vid mate, 🍻 cheers

for years I've often said, I don't really trust a Man that doesn't carry a knife, at least a small pocket knife..

You have any videos on how you do the cams on a Evo engine? I love your step by step with the twist of much needed, and necessary sense of humor lol quickly becoming my favorite “motorcycle mechanic enthusiast” 😅

Thank you so much easier seeing it than reading some oily directions

GR8 VIDEO THANKZZZ FOR SHARING!!!!

"I no longer affiliate with crystal meth, I'm a motorcycle enthusiast." - RYAN KRUESI

Great vid dude thumbs up from me 👍

Good job!!!

28:26 ... it's interesting how Fueling suggest oiling the cam plate bolts and yet S&S say to use Loctite. Both are respected vendors in the industry. A big thumbs up to R.K. for telling it in his own words.

Will you recreate this video with an old style twin cam, evo, m8 whenever you get time? I know how to do them all, but there’s many they don’t and you are probably the best information video creator I’ve ever watched. I’m a fan, so I watch these build videos anyway but so many people could learn from you

best there is on the tube! keep this growing!! also don't do meth!!