HOW TO CHANGE A

Рет қаралды 49,624

3 жыл бұрын

These are a list of parts you will need to complete the job.
filter amzn.to/2XLiU5b
Fuel Pump amzn.to/3grZR6p
Tools: amzn.to/3h8DDa2
other BMW parts
YIOVVOM Fiber Most Optic Loop Connector Diagnostic Device Tool Bypass Female And Male Adapter For BMWPack of 2.
amzn.to/3zOOayA
water pump; amzn.to/3ljYBUT
BMW thermostat : amzn.to/2WXOtZo
Electric Engine Water Pump and Thermostat; amzn.to/3tphity
e60 Belt: amzn.to/3EsUQFk
BMW 3 SERIES front left back control arm: amzn.to/3ElKwyA
CASTROL MOTOR OIL 0W 30: amzn.to/3tEQENL
CASTROL MOTOR OIL 5W 30: amzn.to/395eVmH
LAND ROVER CRANKSHAFT SENSOR LR4 RANGE ROVER : amzn.to/3CpuBgX
Front Lower Rearward Control Arm Compatible with BMW;amzn.to/2XQppV1
BMW e60 Right side Intake Manifold Unit DISA valve :amzn.to/3mlR7RN
Contact me at:
Geniusinnovationsauto@gmail.com
Follow me on social media
Instagram:
Genius_innovations_
KZfaq
• #Trailer for #Genius #...
For contributions and support
PayPal
www.paypal.me/genius1212
I don’t own copyright to the music in the video.

Пікірлер: 44

@JayZee66 2 жыл бұрын

Tanks for that Video. I did that tonight, spent 3 hours because the Nut on the right hand was super strong. P.S. before remove the old pump, assemble the rope first so you don't need to maneuver blindly through the tank backward. .. again, thanks!

@geniusinnovations5268 2 жыл бұрын

Thanks for watching my video, I appreciate you taking the time to send your comment 👍.

@english2811 3 жыл бұрын

just a word of advice before you remove the pump after disconnecting the filter tie a flexible wire on the line so that when you pull the pump out the line will be in place to pull the new pump in.

@geniusinnovations5268 3 жыл бұрын

thank

@ivanpalma9359 2 жыл бұрын

Nice video man I am just ready to start on mine nice music reminds me of the annoying bmw chime.

@geniusinnovations5268 2 жыл бұрын

Thanks for your support , respect every time.

@arasek101 3 ай бұрын

Cześć. Jaki miałeś problem z samochodem? Dziękuję za film.

@geniusinnovations5268 3 ай бұрын

Language?.

@spearreeladventures2943 3 жыл бұрын

very informative

@enriquecisneros5504 3 жыл бұрын

There is a special tool (crown wrench) to remove the nut and avoid using a hammer and chisel, that wrench is also required to torque the nut (18 ft-pounds), the acces panel gasket was damaged due to the mishandling, the fuel pump & filter gaskets were reused (?). Fuel is harmful for the skin, use of safety gloves is required. no fire extinguisher in the work area, the battery negative terminal was not removed, working with fuel and vapors is very dangeours, sparks must be avoided at all times. Professionals don't work this way. Note of Caution: Before installing the cushion seat, the tank must filled to full to check for leaks.

@Thomas998822 Жыл бұрын

and yet the job was completely without issue

@z09adam Жыл бұрын

🤓

@geniusinnovations5268 3 жыл бұрын

🔥🔥🔥

@kmanniec9128 2 жыл бұрын

Good job

@ericarm9623 3 жыл бұрын

💯💯 great tutorial

@geniusinnovations5268 3 жыл бұрын

Thanks 🙏

@geniuskenny8846 2 жыл бұрын

🙏👌well done ✅

@ahmadestabraq274 11 ай бұрын

Thank you that was really helpful ❤

@geniusinnovations5268 11 ай бұрын

You are most welcome

@luccea9982 Жыл бұрын

I just changed mine and i hear a like a sucking noise from the filterside fuel line. Is it possible that the lines are mangled inside and that is why there is too much air in the system. Very clear video and thank you in advance!

@luccea9982 Жыл бұрын

They also have a lot of play. Both sides move up and down by a centimetre.

@geniusinnovations5268 Жыл бұрын

Hi , it might stop after all the air pockets in the filter is replaced by fuel .

@ballack1884 11 ай бұрын

Yard man?? Great job bredda

@geniusinnovations5268 11 ай бұрын

Blessings bro

@sochillcyp 2 жыл бұрын

Amazing job Amazing job

@geniusinnovations5268 2 жыл бұрын

Thanks 🙏🏾

@ginominelli4837 Жыл бұрын

Nice Video , i love it ! 👍

@geniusinnovations5268 Жыл бұрын

Thanks

@jtechnics7234 6 ай бұрын

Excellent

@e55v86 3 жыл бұрын

Good

@geniusinnovations5268 3 жыл бұрын

Thanks

@uzonercchannel8806 Жыл бұрын

hii bro,,can i known what symptoms problem for fuel pump problem

@geniusinnovations5268 Жыл бұрын

Hi,after driving for a few hours sometime it will have a delayed response when starting, will lose power if rapid acceleration is applied and most commonly is the vehicle will not start.

@MegredyPhotoStudio 5 ай бұрын

Back again. So, i was chiseling the ring, and I didn't notice that it was turning all together with the pump assembly, that broke eventually. Now , not matter how long i turn the ring, won't come off.

@Snuwyy 3 ай бұрын

Use wd40, I had same issue.

@DrRestorations 3 жыл бұрын

One safety reminder: wrap the chisel end with cloth to prevent any possible spark which may ignite fire under leaking fuel! Also, it seems there is no need to remove the wires connecting the pump and filter assembly and re-insert. Instead, you can remove the old pump, connect with a new one, then remove the filter assembly and connect the other end.

@pitbullbite5835 Жыл бұрын

Thanks... My turn lol...

@geniusinnovations5268 Жыл бұрын

Lol 😂 all the best and good luck 👍

@thefamthefam5131 3 жыл бұрын

This mechanic put a new fuel pump in and when I drive gas is pouring out from underneath my car. What did he do wrong? He’s out of town and I have to go to work

@geniusinnovations5268 3 жыл бұрын

hello ,the fuel charge line can need a new seal or the fuel pump housing can need to be tightened.

@MegredyPhotoStudio 5 ай бұрын

Having the pump on one side and the filter on the other side.. not very smart..

@geniusinnovations5268 5 ай бұрын

Hello , The manufacturer have their own opinion on that lol 😆

@MegredyPhotoStudio 5 ай бұрын

@@geniusinnovations5268 they realised it was stupid. That's why, on the latest models it's all in one place 😂