Was this video helpful? What other kind of videos would you like to see us make?

You are super bold doing that on a glass table top! I was super worried you were gonna break your table lol

I’m a wheelchair user. We’re notoriously rough on our bearings especially since I mess with some wcmx ground work. Basically street skating but for wheelchairs. I also refuse to stay inside during winter on snow covered and salted roads so my bearings completely seize every couple months. I just got myself some new spacers and metal free ceramic and nylon ABCE 11 bearings for help with shock absorption and eliminating the possibility for rust for spring. I’ve never had a smother ride but I change bearing type based on time of year too.

Thanks man, that was really helpful for this old pair of skates I found at goodwill. I thought I had to pay ridiculous prices for new bearings, but ended up the old ones I have work fine when cleaned. I didn't have to purchase tools, so using stuff around the house is very practical for casual skaters who don't feel like buying a tool for their bearings. Thanks again.

Just saw a Short of someone using an ultrasonic cleaning machine to clean their bearings. I've had an ultrasonic cleaner for years but never thought of putting my bearings in it. Game changer.

I'm just digging your Farrah Fawcett vibe

I am loving the contrast between relaxing desk candle and casual skeleton slouched on a chair behind it

I’m scared your going to break your glass table when inserting bearings . I loveee your hair and love the video.

Hi there ! Useful video thanks ! But some important safety info missing : I think the candle is a bit dangerous and unnecessary. Most products you would use to clean bearings are highly flammable (alcohol, acetone, wd40...). Also when you say dump the liquid out, one should check if the chemical or solvent they’re using is safe to be discarded down the drain or in nature. Acetone can melt some plastics so if you have plastic pipes it’s going to damage your installation + it’s terrible for nature. Chemicals and solvents should be discarded to a hazardous waste facility. ;)

Love seeing Karli!!! Such style, great laugh & so knowledgeable!

My dog pulls me on my long board and my wheel barrings take a tun of abuse riding over 20km an hr on badly maintain sidewalks. Great video for cleaning! It made a massive difference and my dog definitely appreciates the smooth ride.

This was such a wonderful video. I love how hysterical Karli is. 🤣 I can't wait for when I need to clean my bearings, this will be my go to tutorial to watch! Thank you! 🙌🏽💞🛼🦋

pro tip - use the 3 way tool you have to push it out the other side for the 2nd bearing

Very helpful and well structured for jumping around the vid, thanks!

Thanks for the video! That was great information! Now do the other 8 bearings!

I found you enjoyable and entertaining to watch ⭐️⭐️⭐️⭐️⭐️

Thanks for the info. Was a fun and informative video to watch

You were amazing I now feel confident with changing mine. And youre funny.

Excellent Video! Thanks!

Great presentation

I applied for sonic as my first job because I loved to skate, thought it was the coolest place to work! I got "sonic" skates back when I was 16, I'm now 27! I still skates on the same wheels...I've never cleaned them 😕 I've always just kept riding. I definitely have a lot of learning to do. My elbow scars understand now lol 😆

Fantastic explanation . Thank you.

thank you for this video!

Thank you so so much❣️

This was so helpful thank you !!! Does it matter if they're ceramic

The "what if you're all bones" skeleton comment + the Bones Bearings cleaning video on the related made me genuinely laugh hahaha

I use a brass punch, 1/4" will work, about 5" or so long, place wheel outer side down on bench, put brass through hole at a slight angle to engage center race of bearing and tap out with hammer, move punch from one side to the other so bearing comes out straight. Once one bearing is removed use a 1/2" punch and tap other bearing out, you'll have to place wheel on top of a block of wood with a hole larger than bearing so it pushes out otherwise you'll just be hitting your work bench. To clean bearings I use CFC plastic safe brake or carb cleaner, then blow out with compressed air. I use Super Lube synthetic oil to lube the bearings back up. A drill press with correct size brass rod works great for pressing bearings back into wheel, never push on bearing retainer.

I have the bearings with the metal shields and i have actually taken those shields off to clean the bearings on multiple occasions. It's difficult and I've bent them a couple times but I was able to bend them back and get them back on

this video saved my life

I enjoy watching her talk and I don't even roller skate.

Karli is the cutest

That hair 😍💜💜💙💙💜💙💙💙💙💙💙💙💙🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥and thank you for this vid i really needed to know this 💗

You are the best! Thank you for the tutorial. Do you ever use spacers between the bearings on the axle and speed washers on the inside and outside against the truck and nyloc nut? Too much weight for the street? Just a little question. Also, I'll love the hairstyle and fashion you look like Farrah Faucett ( only you're prettier and a better skater ) great !! I ruined a set of bearings skating Vail pass in Colorado on the"11 Mile* bike path I won't bore you with the mundane details However, a loose moose with attitude, a bridge and Clear Creek river and 11000ft altitude. Thank you for all the inspiration you have given me to get back up on my skates (fractured neck injury) and be inspired to sk8t tuff or stay home...

I loved this video! Thank you so much

is there a way to lube the bearings that don’t have a shield after i let them soak in alcohol??

How often should i clean the bearings?

First coment!!! 💜 Love moxies, please restock the Jack boot I want a purple one!!! Is it possible to order in your webb a jack with a metal plate??? Thanks 💜💜💜💜

will 100% acetone work to clean them?

I was trying to clean my moto deluxe bearings and removed the inside ring, thinking it was a cap but it was holding all the bearings inside and they spilled out but I can’t seem to put them back in. Any tips or tutorials anybody knows on how to put them back together or is a new set of bearings the best bet?

Can you use carbon dioxide to clean your bearings as well?

Hoe often do you change bearings?

Hi, I noticed you don´t use bearing sleeves. I was wondering when do you need these?

Do you not use washers on your wheels? Mine came with on washer per wheel with the washer on the opposite side from the nut.

What are your thoughts about using lithium oil?

I just got some moxi wheels, they jooked me cause I ordered the wide ones and they dumped narrow on me. I just put new bearings in and it only took about 50 feet and they unstiffened. These juicy wheels are smoother quieter and faster on these rural streets I skate alone.

I came here to figure out how to use a bearing puller/pusher and she shows me I don't even need one lol. But thag rubber bit came out of one of my bearings I tried pushing it back but it didn't seems to work. Maybe I gotta fully Uninstaller them. I'm actually getting new wheels and bearings soon but I was reading a comment saying to add a washer and spacers on the wheel, to skate even faster. So I wonder would any washer do or does it have to be skate specific and what exactly is a "spacer"

Hello I’m a brand new skater and I wanted to loosen my wheel … during the process I used to much pressure and it looks like my bearing was pushed in to 😓. My wheel spin and it’s not loose when I shake the boot but there is a noise when I spin the wheel. Should I replace the bearing? Or is okay to ride with? I only got my skate a week ago 😓 Please help I’m lost on what to do now.

I just got a pair of Lollies and skated at the park twice (I live near desert in AZ) and noticed the second time I felt like I was moving slower and it took more work. After watching this video I thought that maybe I need to clean the bearings of sand and dirt but my AZ skate community is saying that I should only need to clean the bearings once every 6-8 months. What do you think?

So I roller-skated in the pouring rain, and the next day my roller skate couldn't even roll lol. The experience itself was soo "emotionally freeing" buut it's not something I'll be repeating anytime soon lmao

Some of the metal covered bearing do open! 😉

what bearings do you use

QUESTION-- I had heard it recommended to clean the factory grease from the bearings and replace with speed cream. Should you do that right off the bat???? My bearing on brand new skates don't roll more than 3 seconds. I noticed you didn't have spacers are they necessary on quads??? Powerdyne makes a good tool for the wheels and trucks also.

Do all new skates come with 16 bearings? Silly question but curious.

Heads up 100% acetone will dissolve plastic. Use glass containers to clean your bearings if you’re using 100% acetone.

What if they’re metal shields that don’t come off? How to lube?

How often should we do this? Especially for outdoor skating? Plz

Can't find how to install the cosmoglow wheels. :(

Is it good to take the shields off of both sides of the bearing?

What type of lube did you use for the bearings?

What size socket do we need for Lolly's? I just bought Fundae wheels! But the Y4 tool has been sold out for so long!I ordered the universal tool but not sure that will work.

Well explaind, but I was waiting for the glass table to break. Don´t push too hard.

is that Farrah Fawcett Majors or like Cheryl Ladd?? 😍

I find the bearings slow down about 6 months after I put new ones in.

What kind of lubricant can I use on the bearings?

I trashed my bearings by trying to clean them :'( hopefully this vid helps me a bit

Does 70% alcohol work? That’s what I have at the moment.

Do you _have_ to use bearing lube?

What lube do you use

Idk if using alcohol on the shield is good for them if they are plastic 🤔

Metal shields that are crimped on may appear to be "permanent", but they're not. They destroy them in all the videos I've seen, but they get them off. I can get em off & back on like brand new. "It's all in the wrist"-Chubbs Peterson, Happy Gilmore

Hello please restock soon ☺️🥺😭😀

my bearings are dirty because I off-road onto dirt trails a lot to smoke pot

When they stop and bounce reverse they are dirty. Trash sticks to liquid lube

15:13 Excuse you ;).

Is bearing lube necessary?

Great detail. Funny comments from the dead dude. If my skates slow down, it's from pieces of cat fur.

HER HAIR!!!

Can you use vinegar instead of the alcohol!!!? Thank you! ✌🛼❤

Oh thank you for reminding me to change my bearings lol.

Omg I think I just ruined my roller bones bearings. I washed them with soap and water - help! Can I save them?

I just got my skates and they are squeaking everyone I skate😩 help

Can I use my boyfriends electric shaver oil as the bearing lube lol

I could watch her clean bearings all night long

5:16 she saw an opportunity and capitalized

Not the best way to remove bearings but it works up to a point, too much side load on the bearing. A live flame next to Acetone or solvent - Wow. For someone, that is going to be spectacular. Hope they have fire insurance for their house

Is it ok if I use oil for cars to lubricate the bearings?

im not trying to be mean or anything but... if ur gonna use something that fumes and is flamable...candles isn't such a good idea :') stay safe, happy skating UwU

Didn't I see you in That 70's Show? ;).

🫀✨gracias

10:40

careful alcohol is flammable

Just use wd40 and wipe away clean

Why is every bearing cleaning video using a container to clean the bearings thats just a dirt soup bath Your a girl do you take a bath to get clean like stewing in dirt or do you take a shower and let the dirt wash down the drain? Go to the automotive section at the store you get car oil from, get some break creaner in a spray can it will dissolve all oils and blast the dirt out, dry's in seconds with no residue. Go ahead, try it, you will not go back, I guarantee it

24 hr's!! and all the waisted paper towel !... Nah!