How to Change Brake light | Reverse light | Suzuki Celerio

How to Change Brake light | Reverse light | Suzuki Celerio | LED Upgrade

Рет қаралды 2,406

Күн бұрын

BRAKE LIGHT LED
Auxito P21/5W 1157.
3030 SMD LED Chip - Brilliant red light. Low consumption.
Efficient Heat Dissipation - Aluminum housing. Built-in intelligent driver and temperature control system ensures longevity up to 30,000 hours.
LED PC Cover - High temperature resistant. Soft lights. No glare.
7 Watts/Bulb
3200 lumens/Pair
Plug and Play Installation.
REVERSE LIGHT
Maxgtrs P21W 1156.
3570S Led Chip - Ultra Bright 2000 lumens.
Wide Voltage & Constant Current Chip - Prevent short circuit.
Built-in Copper Substrate - Faster thermal conductivity.
6063 Aviation Aluminum Body - Better heat dissipation.
Timecodes
0:00 - Intro
0:17 - Nighttime light output comparison with stock halogen bulb
0:45 - Remove taillight assembly
1:28 - Remove brake light socket
2:45 - Remove reverse light socket
5:00 - Daytime light output
iMovie Soundtrack | Blue Mountains | Gabriel Witcher

Пікірлер: 12

@rlabonales Ай бұрын

Hi there! 😊 May I please know what type of brake light bulb should I use for my Suzuki Celerio 2012 gen 1?

@junquilang Ай бұрын

Brake light bulb - P21/5W or 1157.

@wesleyvelroij4837 Жыл бұрын

Have you checked if the difference between taillight and brake light is visible when braking? I bought Osram LEDriving for tail/brake light combination, because these Chinese bulbs in general don't do a good job for a combination bulb.

@junquilang Жыл бұрын

Yes. I tested it. Noticeable difference between tail light and when you press the brake light. I agree that some of the chinese bulbs dont do a good job for a combination leds as they are not giving off a much brighter light when you hit the brake.

@wesleyvelroij4837 Жыл бұрын

@@junquilang many simple don't change the brightness at all: they burn the same brightness, for taillights or braking. I was watching your video: because I wanted to see, if there would be space to fit a load resistor for retrofitting Indicators. Have you tried replacing the indicators by LED already?

@junquilang Жыл бұрын

@@wesleyvelroij4837 I think I saw an ad few weeks ago about indicators that have a built-in load resistor and dont hyperflash/hyperblink. They even advetise that it can flash continuously for more than 2 hours with no issues at all. I will post the link here once I see it again.

@batangeytees Жыл бұрын

Sir question po. Changed my brake light bulb to red led kanina double contact naman sya. But unnoticeable po yung brightness difference when park light is on brake off vs park light on brake on. Sa inyo rin po ba ganon?

@junquilang Жыл бұрын

Magpalit po kayo ng branded na led bulb. Yung output nya dapat ay 5W lang sa parklight/position light at 21W kapag tinapakan mo yung brake pedal. Try Philips or Osram led brake light.

@khaleeddagreat2155 Жыл бұрын

ano sukat ng bulb sir?

@junquilang Жыл бұрын

Brake Light - P21/5W or 1157 Reverse Light - P21W or 1156 Nasa video description na din sir mga ibang specs/features ng bulb

@khaleeddagreat2155 Жыл бұрын

@@junquilang tanx sa info sir prng t15 pla ang sukat

@junquilang Жыл бұрын

Hindi ako sure sa sukat ng T15. Ang alam ko yung T15 mas mahaba ang bulb kaysa T10 pero magkapareho ng wedge base kaya pwede mo salpakan ng T15 yung T10 socket basta kasya yung haba ng bulb. Pero if pareho sila ng sukat ng brake at reverse light hindi ako sigurado.