How to change cables Shimano Sora R3000 shifters

No video

How to change cables Shimano Sora R3000 shifters

Рет қаралды 100,651

Күн бұрын

How to change cables Shimano Sora R3000 shifters
If you find the videos helpful and would like to make a small donation to help support the channel you can do so here
www.paypal.com...
Buy me a coffee
www.buymeacoff...
Follow me on Instagram
www.instagram....
info@freetocycle.co.uk
Thanks for watching.

Пікірлер: 85

@MattG-nl4pp 4 жыл бұрын

This video is literally 1000 times better than anything I have seen online for installing these cables.

@jeffwilliams6192 2 жыл бұрын

Great maintenance and repair videos. The direct no-nonsense style is spot on.

@jahithber1430 2 жыл бұрын

Your video saved me a lot of time as I am a newbie, those popular youtube cycling videos doesn't even helped me because they skipped or trim their videos a lot and focus the video more on their faces. Thank you Sir Godbless you

@zeyshaanrafiq 3 жыл бұрын

Excellent, excellent, excellent! Was so scared to attempt this but now feel very confident, extremely good guided video

@kellymorris10342 8 ай бұрын

Perfect video!!! Best I've seen. Short, sweet, and to the point.

@DANISH4114 2 жыл бұрын

Million thanks mate 😀 really couldn’t find any other video except yours. Very helpful for me as I’m doing my DIY upgrade using same equipment.

@dominiquenuyts8309 11 ай бұрын

Short and good video, thanks! I can’t say how much this helped giving confidence on the first time

@benjcrn 9 ай бұрын

Thank you ! Simple but really effective.

@WPD77 3 жыл бұрын

Thank you, been struggling to see how these go in.

@VeganSmasher 4 жыл бұрын

Excellent tutorial. Exactly the information I needed. Thank you!

@jonnysmillermusic 4 жыл бұрын

Exactly. Thanks!

@emreunlu1987 9 ай бұрын

Basic tutorial. İt is perfect. I know little bit English but I understand. Thank you very much.

@g.fortin3228 3 жыл бұрын

Thank you for putting up this vid..this will make it easier for sure when time comes for mine. Cheers !

@yasharfazili4016 Жыл бұрын

The Video is good but the accent is fabulous! Thanks a lot!

@jonathanfarrely83 4 жыл бұрын

Thanks for taking the time to do these videos they have helped me a lot .hope you keep doing them .

@dustin2dust351 2 жыл бұрын

Good video. Right to the point.

@arcoulant87 7 ай бұрын

Thanks for posting it helped me today .

@gualberto921 Жыл бұрын

perfect for what we needed it for

@Wombels1987 3 жыл бұрын

thanks mate a was lost trying to get me old one out so watched this to figure it out ,,nice one

@andikamitrakaruna6495 2 жыл бұрын

Hi, how did you get the shifter head out? I tried to push the cable outward but the head just go down deeper. Can please advise?

@skids181 Жыл бұрын

Excellent, thank you for sharing this!

@seanrennie7790 Жыл бұрын

Thanks!!! This video really helped me out.

@MarioDeFeliceNetworkEngineer 2 жыл бұрын

Thanks man. This is a brilliant video, so clear

@spencerrobinson2719 Жыл бұрын

Thank You!!

@user-cr2sr7ml6q Жыл бұрын

Thanks!

@LuisMRios-ts6wj 4 жыл бұрын

Thank you so much... you save my day

@mrscotchguy Жыл бұрын

Thank you

@prapramonks1625 3 жыл бұрын

Thanks mate for the tips

@mr.mattman 2 жыл бұрын

Perfect! Thanks!

@siewhueiwong5294 2 жыл бұрын

Very helpful

@MrJustinhi Жыл бұрын

cheers dude didnt have a clue !

@vaughanbbrean71 Жыл бұрын

Brilliant thanks !!

@ayeaung3524 3 жыл бұрын

I love it , It is really useful

@Sparvar1 2 жыл бұрын

Very useful, thank you

@robbo3132 2 жыл бұрын

Good video, thanks👍

@chrisbramley9589 9 ай бұрын

Sorted. Cheers!

@zibih3426 Жыл бұрын

Bravo. Super.

@Kufunninapuh 2 жыл бұрын

Fantastic

@JUSSTTIINFU3K 4 жыл бұрын

Legend

@MasMariusb 3 жыл бұрын

Great. Thanks!

@pvww 3 жыл бұрын

thank u so much sir!

@Starringme0 4 жыл бұрын

Thank you!

@LuizEduardodosPassos-cz4pb 11 ай бұрын

Obrigado pelo vídeo 😸

@malennachbruchzahlen 4 жыл бұрын

awesome, thank you!

@deefukka4121 3 жыл бұрын

thanks

@ukaszbad7565 4 жыл бұрын

Thanks a lot!

@danm4935 26 күн бұрын

Does the cabling housing for the brake have to go all the way in till it stops, or it can it stop a bit short before it reaches the end? I may have cut my cable housing wrong :(.

@kevinkace 22 күн бұрын

What do you do if the cable is already cut and not in the lowest gear?

@erhan6095 3 жыл бұрын

thanks.

@JOSEACRECIO 11 ай бұрын

Parabéns... Ficou ótimo

@robbo3132 2 жыл бұрын

Both the cables come out on the inside of the lever right? My bars have a cable hole on outside of lever and a cable hole on inside of lever, so these levers might not work unless I use bar tape to guide one of the cables externally right?

@DeepakKumar-lv4te 3 жыл бұрын

Hi thanks for this, do you think the ferules with the tounges are essential? Could a regular cable ferrule without the tounge be used or would it spoil the cable action. It's a right pain trying to get hold of a ferule (end cap) with that tounge. thx

@Timberius 3 ай бұрын

I'm finding it hard to get thebuld cable out. I suppose I just have to use a small flat screwdriver or something to lift the end out.

@FreeToCycle 3 ай бұрын

This video may help you! kzfaq.info/get/bejne/g710qLSDvc-rf2g.html

@morronemaximiliano 3 жыл бұрын

Gracias, fue de mucha ayuda

@samueljaros 4 жыл бұрын

Brilliant.Except of course I couldn't even make it to that bit coz I can't remove the old cable.

@samueljaros 4 жыл бұрын

TOO LATE ! I've pulled so hard to get it out I've probably damaged the shifter beyond repair !

@FreeToCycle 4 жыл бұрын

kzfaq.info/get/bejne/g710qLSDvc-rf2g.html

@DeepakKumar-lv4te 3 жыл бұрын

excellent vid, thank you. for us having to upgrade 20 yr old non serviceable ultegra shifters to sora (because they're 9 speed) is a pain. Q. would you reuse the old shimano outers on the gear cable or switch to the new sora outers which look a bit different (using the new gear cable).

@FreeToCycle 3 жыл бұрын

I would use the outer cables that came with the gear cable kit!

@christianalboroto7574 Жыл бұрын

Is it the same for the left shifter?

@FreeToCycle Жыл бұрын

Yes!

@bleexrossignol9782 4 жыл бұрын

hello, is it difficult to install road shifters on a fintess flat bar bike ?

@carolynrodgers3841 Жыл бұрын

What is the seat post made of?

@testdirver 2 жыл бұрын

same process for claris 2000 or tiagra 4700?

@philipmansfield9951 Жыл бұрын

Trying to find outer cable ends. Amazon?

@FreeToCycle Жыл бұрын

Search online for Shimano SIS outer gear casing.

@smokeywisk 3 жыл бұрын

That’s a very specific gear cable end. I just bought some of these 2nd hand but don’t see the ends. Will any end do please?

@FreeToCycle 3 жыл бұрын

The correct cable end for the shifter comes in any Shimano gear cable set.

@lloydsundal814 2 жыл бұрын

My old cable snapped and the head is now stuck inside, is there a way of getting it out e.g. removing the whole thing and taking it apart? TIA

@FreeToCycle 2 жыл бұрын

kzfaq.info/get/bejne/g710qLSDvc-rf2g.html

@tomraytr 4 жыл бұрын

Hi, Just picked up a pair of these shifters second hand. Unfortunately no plastic end caps came with them (3:20 on your video). Can these be purchased separately or would any other ferrule with a groove work? Thanks

@FreeToCycle 4 жыл бұрын

You will get the correct ones in a Shimano gear cable kit!

@tomraytr 4 жыл бұрын

@@FreeToCycle Thanks for the reply - I can't see a ferrule with that groove in the gear cable pack from shimano... Is it a special order item?

@FreeToCycle 4 жыл бұрын

I’ve just checked all the gear cable kits I have and everyone has two of the shifter ferrels in the pack!! That’s why it’s a kit to fit inner and outer cables to both derailleurs from both shifters!

@ibmuso 4 жыл бұрын

Thanks for this great vid! Really helpful. I have a question - I can't quite see on the vid... is there a grey plastic runner inside the slot for the gear cable stopper? I'm just trying to change mine and have noticed that on the left shifter there is a grey inner plastic part that isn't present on the right shifter. Is it supposed to be like that, or have I lost a piece? Complete novice here so sorry if that's a ridiculous question!

@pedronalesso1464 4 жыл бұрын

Can you shift Sora rd with Acera shifter for flat bar?

@DeepakKumar-lv4te 3 жыл бұрын

my guess is yes. they are both 9 spd and from memory the mtn bike also uses the HG50 rear 9 speed cassette. Just a guess though.

@pedronalesso1464 3 жыл бұрын

It took me a while to test it but Sora shifters works with Acera rd, it's just a little more sensitive shifting upwards to easier gears, also it works well with 11-40 cassette