How to change Camaro SS 1LE Brembo 6 piston brake pads
Рет қаралды 12,128
3 жыл бұрынIn this video we show you how to diy and change the brake pads on the 2018 Chevrolet Camaro SS 1LE with 6 piston brembo brakes and brake pads. It’s very very simple. On my particular camaro I have nearly 50k miles and still had pads left but since we are going to the track we must take this necessary measure.
Let’s connect on ig: @phaze_1l (camaro) and @mrpha2e for the MR2 :)
@Dunkaroos248 3 жыл бұрын
I recommend anyone watching this attach a bleeder hose and bottle to each side’s bleed nipple and crack it open when compressing the pistons. This will make it easier to compress the pistons as well as collect the brake fluid instead of pushing it back through the brake system and risk blowing a seal. You can then Top off the reservoir with fresh DOT 3.
@Infinite.phases 3 жыл бұрын
Thank you for the tip. ✌🏻
@KalebH-ih8ik 8 ай бұрын
I do this same thing, however make sure you know what you are running the 6th gen 1LEs are usually upgraded to DOT4
@N0LYF3 2 жыл бұрын
good visuals here of showing how the works done.
@g3orge7309 3 жыл бұрын
Great video brother 👌🏻
@TheDeviusPiper 3 жыл бұрын
Nice 1LE, I absolutely love mine! Did you have to watch the brake fluid level while compressing the calipers back?
@13hasaan 2 жыл бұрын
Thanks for the video !!
@Infinite.phases 2 жыл бұрын
You’re welcome. Thanks for watching and commenting.
@mansooruddinahmed128 11 ай бұрын
Can you discuss whether it is necessary to bleed/flush brakes with every pad/rotor change? I came back from a track day with my brake pedal feel super long and the sound of scraping in my brakes. Wondering if i have to do all three, change pads, rotors, flush. THanks,
@Infinite.phases 11 ай бұрын
Your pedal feels long because your brake pads are worn down from track use. Therefore there is more play in brake cylinder/pedal. If you look at your fluid it’s probably lower too right? Because the brake cylinder is pressed in due to worn pad. Change the pad and you’ll see pedal correct itself. If fluid is dirty change it. If it has air bleed it.
@w41duvernay Жыл бұрын
ARE these pads carbon fiber/ceramic?
@iamkhan9661 3 жыл бұрын
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
@atosa.t4773 2 жыл бұрын
What brake bad did u go with?
@Infinite.phases 2 жыл бұрын
Oem brembo
@muriel104 2 жыл бұрын
Remember rectify the disc.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 4,3 МЛН
ОВР Шоу
Рет қаралды 7 МЛН
Stirling Moss
Рет қаралды 48 М.
Gearhedz garage
Рет қаралды 243 М.
FCP Euro
Рет қаралды 557 М.
Sam CarLegion
Рет қаралды 51 М.
НОВОСТНИЧОК
Рет қаралды 1,4 МЛН
ГОНЩИК БЕЗ СЛУХА
Рет қаралды 4,3 МЛН
Classic Cars Mechanic
Рет қаралды 4,2 МЛН
МАРТИН БОГАТЫРЕВИЧ garage
Рет қаралды 1,8 МЛН