Not so good, but you have tried. You should have cleaned the whole thing with compressed air, damp cloth to remove dust and particles before putting it back together...
@potnurusyam59432 жыл бұрын
Super. Ekkada
@chroustek Жыл бұрын
how to destroy bearing during mounting procedure?
@ZaphodBeeblebro Жыл бұрын
Step no 1: Take a steel rod and hammer and smash the nut free instead of using a 50c tool suitible for the job Step no 2: Take a crowbar and or smash the old bearings against a rusty piece of steel you find in the bazar, to loosen them. Step no 3: precision fitting! Take the discarded bearings and violently smash them with a hammer on top of the new bearings, this will cause the excellent original Chinese fit to rub on on you new rusty sandfilled bearings. Step no 4: rub old frying grease and earwax mixed with dirt on ALL movable parts DO NOT omit this step it is essential for the operation of your high speed precision spindle!! Step no 5: Hammer everything back together with a rusty nail, if you hit it exactly the same amount of times as when you opened it your spindle will be perfectly balanced!! Happy carnage!
@wonderofnature5386 Жыл бұрын
youtube.com/@shrikantgaharwar?sub_confirmation=1
@sreaedhar Жыл бұрын
Very substandard work. Even road side mechanics do a better job. How come a normal all purpose grease is used for a high speed spindle
@wonderofnature5386 Жыл бұрын
youtube.com/@shrikantgaharwar?sub_confirmation=1
@MDSameer-do5yu Жыл бұрын
Hi sir
@girishpatel9416 Жыл бұрын
Angular contact ball bearing position kaise hoti hai . DB ..DF.. DT btane ka kast kare
@mousumiparvin38 Жыл бұрын
Hi
@pravin143882 жыл бұрын
Which bearing is used and total number of bearing?
@wonderofnature5386 Жыл бұрын
youtube.com/@shrikantgaharwar?sub_confirmation=1
@naeemabbas2673 Жыл бұрын
جن
@raviravi-en5br Жыл бұрын
I want spindle fan
@wonderofnature5386 Жыл бұрын
youtube.com/@shrikantgaharwar?sub_confirmation=1
@vipulgames Жыл бұрын
Hii
@cncwoodworks2653 Жыл бұрын
Hello
@vipulgames Жыл бұрын
Spindle repair contact
@sreaedhar7 ай бұрын
Very sub std workmanship. These spindles run upto 15000 or more rpm. Hammering the lock nuts will create imbalance. What grade of bearing was used and what grease was used??. Overall, very sub standard work.