How to change Corsa D heater resistor!

No video

How to change Corsa D heater resistor!

Рет қаралды 56,424

3 жыл бұрын

Hello.
Not long ago my heater resistor stopped working and my fan was only working on level 4. In this video i am showing how to change Corsa D heater resistor.
Please subscribe to my channel and follow me on instagram.
/ hadgarageuk

Пікірлер: 51

@stevet1963 3 жыл бұрын

Can be a nightmare job but you overcame the problem socket Well done fella 👍🏻👍🏻

@HadgarageUK 3 жыл бұрын

Thank you!

@LIES666 2 жыл бұрын

This was such a ballache to squeeze into position to even start fixing the problem. Kept putting it off even when I had all the parts. Glad I have all the fan settings again finally.

@hellofromtheuk3642 5 ай бұрын

Thank you so much for post this. I've fixed my daughters corsa which had exactly this problem. A 7/32 inch socket will fit that nut. The new one came with a 7mm nut. Thanks again.

@kaiserslauternslayer Жыл бұрын

Thank you. You did did the hard work to make my. Life easier 😊

@rabgabro6595 7 ай бұрын

Finally after lot of fidgeting. Its fixed. Thank you

@roelofv3995 2 жыл бұрын

Great video. Saved me a trip to the garage. Thanks mate

@ravey1981 3 жыл бұрын

Thanks for this. It is indeed a 5.5mm. luckily I had one. Still a fiddly job getting the resistor out....

@safdarkhan33 Жыл бұрын

Thanks very helpful video

@kevslife 5 ай бұрын

Get a dremmel tool and cut a notch or slot in the top of that 5.5mm bolt head. Then you can use a screwdriver the next time you need to replace it.

@jamesy1955 3 жыл бұрын

7/32 inch socket fits best on the little bolt/screw. 🤗🤗

@zokxso1627 5 ай бұрын

5.5mm too

@micchaelfearn5163 8 ай бұрын

Can you please tell me where the earth wire is for the heated rear screen on vauxhall corsa D 2008, ??

@differentdrummer6162 3 жыл бұрын

Great video - I have to do the same job. Can you recommend a brand of resistor please, such as Topran, Febi etc? I think they all have that lug in the wrong place...

@mikexc90 Жыл бұрын

Your wring was also clearly burned out which is as common also, really needed to change the plug too

@MyMooseman Жыл бұрын

My blower has started to make a noise on 1, and 2 settings, seems to blow hardest rubbish at clearing the windscreen.

@shawnfernandes891 3 жыл бұрын

Sorry but I am confused to where you opened the bit to access the heat resisters, cause I though you need to open up the radio using release keys?

@HadgarageUK 3 жыл бұрын

Hello 👋 It's behind the glove box.

@michaelbwwfc Жыл бұрын

Could it be the same issue if my window blowers don't work

@ciprianion4142 3 жыл бұрын

That is a 5.5 …I struggled to get that screwe off as well

@chris-12500 3 жыл бұрын

Changed mine but made no difference, still only works on setting 4. Any ideas??

@IeuanBevan. Жыл бұрын

Get hammer.........use hammer.....problem fixed 👁👄👁

@anthonyatkinson2950 6 ай бұрын

Where is the location of the resistor / wiring please?

@ewangrant3899 7 ай бұрын

So I tried this this did everything you did but still stuck on number 4 and 123 still not working any advice?

@masoncotton6904 4 ай бұрын

Might be an electric problem unfortunately

@ewangrant3899 4 ай бұрын

Ye I’m not sure what it is but basically in the footwell of the passenger side there like a black thing that almost holds the vacuum hold of it in and it had basically come out

@aleksandardimitrov2590 3 жыл бұрын

Good job

@kevinanderson258 3 жыл бұрын

Do you need to take glove box out

@chazwalker7156 2 жыл бұрын

@@kevinanderson258 No, but it does help, as you probably now know 👍

@alysiawilliams8005 3 жыл бұрын

Did you file both sides off or just one

@HadgarageUK 3 жыл бұрын

Just the one that does not match the hole.

@GoggyTwackGaming 3 жыл бұрын

do you need to disconnect battery

@HadgarageUK 3 жыл бұрын

I didn't disconnect the battery

@jamesy1955 3 жыл бұрын

HadgarageUK Nor did I. 🤗🤗

@chazwalker7156 2 жыл бұрын

@@jamesy1955 Me neither

@Malleabile 2 жыл бұрын

Where did you buy?

@SaBatheone 2 жыл бұрын

Amazon

@bootsmclaughlin1438 2 жыл бұрын

What do you think the problem would be if its not workin on 1.2.3 or 4. Some times it works and sometimes not....Anyone plzzz

@alan1607uk 2 жыл бұрын

Mines doing the same, Give the underside of the glovebox a whack and it might start again (for a few weeks) - there is a video on youtube of someone doing this and worked for me.

@bootsmclaughlin1438 2 жыл бұрын

@@alan1607uk had to change the blower motor £75 stuck it in meself jobs a goodin. I hit it a few slaps but no joy. Apparently it's a common fault on them Vauxhalls... thanks for your reply

@mohammedkayani8302 Жыл бұрын

@@alan1607uk i jus did this and it started working on 3/4 ..

@bootsmclaughlin1438 Жыл бұрын

@alan1607uk better to just change it for a new motor get it done rite... save you knocking the f out of your poor car lol

@alan1607uk Жыл бұрын

@boots McLaughlin I agree, but a useful short term solution until you have the part

@stefanutzzustf7244 2 жыл бұрын

Romină

@grahamstraw8533 Жыл бұрын

Not 1 of mine works any ideas

@lawrencehenson8409 Жыл бұрын

An absolute stupid idea for locating the unit, all it needs is that one bolt & possibly to slide fit the unit, but not those stupid flaps you have to press simultaneously, what moron thought that up. BTW the bolt size isn't 5 or 6mm although the latter is a loose fit & will do the job, it's actually 7/32nds of an inch, this probably because Vauxhall is, or was part of America's General Motors (GM) and as such the company used imperial (AF) fixings