How to Change John Deere Z920M Mower Blades and Install Jack Kit

Рет қаралды 58,420

4 жыл бұрын

Step by Step learn how to safely change the mower blades on the John Deere Z920M Ztrak, also we install the John Deere Jack Kit to lift up mower deck.
► Buy John Deere Parts - go.west-equip.com/youtube/sho...
► Need help finding John Deere parts? We would love to help! Call (806)557-2948
Other Z920M Videos:
► How to Service Z920M - • How to Service John De...
► Z920M Review - • John Deere Z920 Zero T...
► How to Level Z920M Deck - • How to Level John Deer...
► Z920M Mow an Acre - • How fast can the John ...
#JohnDeere #Deere #ZeroTurnMower

Пікірлер: 55

@bradbruggeman6745 5 күн бұрын

Nice setup on that jack kit. I wish my SCAG had that, but my floor jack works well under the V of the deck.

@vincentvanpaepeghem4844 4 жыл бұрын

Great video! Thanks for sharing!

@WesternEquipment 4 жыл бұрын

Thanks for the comment as always!

@traceymaddox2646 3 жыл бұрын

Mighty proud of that 25.00 jack ... 242.00 really, must be for that green paint

@WesternEquipment 3 жыл бұрын

Definitely hear this a lot unfortunately.

@jmass89ify 10 ай бұрын

No telling what it cost in 2023

@fgonzalez78959 8 ай бұрын

380 now

@arepadetrigo Ай бұрын

@@fgonzalez78959 $450 in June 2024!!!!!!!!!!!!!! They are jacking up the price!!!!!!!!!

@chord972 3 жыл бұрын

Excellent!

@WesternEquipment 3 жыл бұрын

Thank you and thanks for watching!

@johnspoon923 4 жыл бұрын

Well done.

@WesternEquipment 4 жыл бұрын

Thank you and thanks for watching!

@luigivincent3369 3 жыл бұрын

Great video Just one more important safety measure to take when changing blades. What I do I pull the spark plug wires off the plugs this way there's no chance of the engine starting while working underneath a mower

@WesternEquipment 3 жыл бұрын

That’s a good idea to pull spark plug wires off. Thanks for the comment!

@jordlee9059 Жыл бұрын

I disconnect the battery and tag it out at home.

@chrisrogers1248 7 ай бұрын

Looks like a lot of stress on that jack!it's bending quit a bit.i need something to raise my mower but this scares me a little

@WBuj-db2wx Жыл бұрын

Is there an option to have a power drill attachment to assist with the lift?

@WesternEquipment Жыл бұрын

Not that I see from the factory, but you may be able to alter the jack to make this work. Good idea and thanks for watching!

@ericcoe1760 Жыл бұрын

If you use an impact wrench do you still need the block of wood?

@WesternEquipment Жыл бұрын

Most of the time you don't, but it is still a good fail safe if the blade tries to spin.

@scott1395 3 жыл бұрын

One question, when tightening down my blade bolts I can't get what I consider even close to tight before my whole spindle assy ( pulleys spin). How do you get past that!!! Bought this mower used for a steal, changing blades for first time!!!

@deborahcuster8142 3 жыл бұрын

go to ebay and get the arnold blade changing tool , it is well worth it . to keep from pver tightening the tool in one place, put it in the valley where the blades barely meet. give it a good snug. that will hold the blade still .

@WesternEquipment 3 жыл бұрын

There are multiple ways of doing this. I usually use a block of woof to wedge in place to keep the blade from spinning. You can also use a clap on the outside of the deck to keep them from spinning as well. I hope this helps and thanks for watching!

@sidallen685 3 жыл бұрын

Hi are these Jack kits available for the 2021 950M model ?

@WesternEquipment 3 жыл бұрын

They should be as long as yours has the mounting holes that are shown in this video. I know there has been some inventory issues with John Deere so I can't say for certain if they are physically available at the time or not. Thanks for watching!

@jddriver9565 2 жыл бұрын

Hello again, iam "dreaming" about getting a Z335E to replace our X100 deere in a couple years. do you know if it is possible to lift the front of that Z3E by hand to put it up on a jackstand?

@WesternEquipment 2 жыл бұрын

Yes. a lot of people could probably lift it by them selves and if not, then definitely 2 people could lift it.

@jddriver9565 2 жыл бұрын

@@WesternEquipment that sounds good,thanks!:)

@eans19 Жыл бұрын

Do the blades need to be in a certain phase with one another or can you just leave them random?

@WesternEquipment Жыл бұрын

They do not have to be any certain way. They are designed never to meet. Good question though!

@M70ACARRY 8 ай бұрын

Why did you jack it up so low?

@kevincosma7945 3 жыл бұрын

Where can I get that jack stand bracket that mounts to the front?

@WesternEquipment 3 жыл бұрын

247Parts.com! Thanks for watching!

@kevincosma7945 3 жыл бұрын

@@WesternEquipment I went to your website, I didn't see the bracket. Is it available?

@cloudcloud490 3 жыл бұрын

You do a great job!! However, this is directed to those John Deere R & D responsible....for what you pay.....they really should have a dependable flip up system by now....I guess Grasshopper is the only one with a dependable flip up?

@WesternEquipment 3 жыл бұрын

I'm not familiar with too many models that have flip up decks so I would assume Grasshopper has the best design. Thanks for watching!

@MegaPint17 Жыл бұрын

What size is the bolt?

@WesternEquipment Жыл бұрын

Which bolt?

@aurora04444 Жыл бұрын

They say in book using jacks on frame?

@WesternEquipment Жыл бұрын

What do you mean?

@aurora04444 Жыл бұрын

@@WesternEquipment, hi! The mower manual says to use jacks and jack stands on the frame of mower, not the mower deck

@user-bx1xx4sm4e 3 жыл бұрын

Left front wheel chock installed wrong…. Pointed edge of chock should face the tire.

@WesternEquipment 3 жыл бұрын

These chocks are slanted on both sides so they can be used for semi's with duals. But good eye! Thanks for watching!

@mattpierce2451 3 жыл бұрын

Like all videos they don’t tell you to turn clockwise or counterclockwise

@WesternEquipment 3 жыл бұрын

Clockwise to raise and counterclockwise to lower

@lastofninevap 2 жыл бұрын

thats what im looking for clockwise or counter , have a 6 ft bar cant breakloose . counterclockwise ,they are not going back on that tight

@thanhquan9920 4 жыл бұрын

*Western Equipment* Cóainghetuôihôn?

@WesternEquipment 4 жыл бұрын

???

@johnbrougheriii1621 3 жыл бұрын

It's easier, and you're less likely to bang yourself up if you use the following sequence: 1) Remove one of the outer blades 2) Remove the center blade 3) Remove other outer blade 4) Re-install center blade 5) Re-install one outer blade 6) Re-install other outer blade

@WesternEquipment 3 жыл бұрын

Good advice and thanks for watching!