HOW TO CHANGE O RING & FILTER ON FUEL INJECTOR

No video

HOW TO CHANGE O RING & FILTER ON FUEL INJECTOR

Рет қаралды 10,186

2 жыл бұрын

This is a DIY change of o-ring and filter and testing of fuel injector on 2002 Mazda Protege 2.0L.
You can comment, like & pls. subscribe. Thank you.
/ @timpaps

Пікірлер: 24

@timpaps Жыл бұрын

Hello! Welcome to my channel, hope the video helps and can you guys subscribe and help me grow my KZfaq channel pls. Thanks a lot and I appreciate it very much.💚🙏👍

@noey5766 5 ай бұрын

Thanks for the demonstration! I like your idea of the washer lubricated with the oil. Did not expect the microfilter would have been that hard to remove.

@timpaps 5 ай бұрын

You're welcome and thank you too. Regards and Aloha! 🤙

@baushun332 11 ай бұрын

Can i use engine oil as lubricant? And what if i buy different size, does it matter if i have good seal?

@timpaps 11 ай бұрын

I lubricate the o-ring with clean unused engine oil. The size of the new o-ring must be the same as the old one, if small it will leak, if big it will not go in. Thank you for watching and for your interest in my videos.

@baushun332 11 ай бұрын

@@timpapsso i only need a good seal.

@baushun332 11 ай бұрын

@@timpapsthankyou for taking your time to reply

@timpaps 11 ай бұрын

@@baushun332 You're welcome, thanks.

@timpaps 11 ай бұрын

@@baushun332 That's the purpose of the o-ring.

@mattjairus2452 2 жыл бұрын

Do you know what is the size of the O rings?

@timpaps 2 жыл бұрын

Hello Matt, thank you for watching. I don't know the size, I just Google searched a kit that match my car and I found it on Ebay. If your car is the same as mine, here's the kit #84212244 on Ebay.

@noramira5425 9 ай бұрын

Well done ✅ 👍👍👍

@timpaps 9 ай бұрын

Thank you, regards and Aloha! 🤙

@jamesmichael8549 Жыл бұрын

Is that safe to place a car oil to those rings ? That's gonna catch fire ? My question is do you have to push it inside the rail those o rings ? My o rings just dont want to go inside the rail .Mines I used my car oil is that ok and is it safe ?

@timpaps Жыл бұрын

That's the purpose of the oil to lubricate the o-ring so that it'll go in easily. The o-ring is designed to a high temp. application, if it's an ordinary rubber it would start a fire even if you don't put oil on it. My car is running ever since and it didn't catch fire yet. Thank you for your interest in my video.

@jamesmichael8549 Жыл бұрын

@@timpaps I have a question in my O rings near to the s witch the one that goes to the rail does that O rings near the switch goes all the way in ? Or the O rings just make it a little tighten so it will hold and not leak ? I had a Toyota Camry 2001 LE 2.2 Litter 4 Cyl

@timpaps Жыл бұрын

@@jamesmichael8549 Must go in all the way otherwise you have the wrong size o-ring. Thanks!

@vioreliancu9674 4 ай бұрын

Bună! De Unde pot cumpăra minifiltrele pentru injector ? Mulțumesc.