How to Change oil on a CAN-AM OUTLANDER 700 XMR after sinking it.

Рет қаралды 2,531

Жыл бұрын

#canam #outlander #xmr #4wheeler #howto #oilchange #quad
So guys after sinking my brand new 2023 Can-Am Outlander 700 XMR.
I had to flush all fluids 6 times just to get the milkiness out of the oil.
Just making sure i'm going through all the procedures so all the water
is out of the engine, transmissin, differential.

Пікірлер: 34

@CERRISMOsergioaventuras 4 ай бұрын

me sirvio bastante thanks

@cmaw3150 Жыл бұрын

Great video man. Super helpful if someone is sunk. Even for regular maintenance too! Cool to see it stripped down as well. Cheers.

@G-Boyz.Outside Жыл бұрын

Thanks homie appreciate all the support🍻

@user-jo5vh2dn3i 4 ай бұрын

I sank my 2024 also still running. I’m rebuilding the top end regardless

@G-Boyz.Outside 4 ай бұрын

Did you hydro lock your machine? is that why you have to rebuild the head

@CMDRTeklow82 Жыл бұрын

When i sunk my quad. the best advice i found. was get some cheap 10w40 ATV oil like a from local walmart. change the oil. run for 10 mins or threw 1 radiator cycle. to that the engine heats up fairly nice. change oil filter each time.. i could of done this twice and been fine. but i did this 3 times, and the 4th i put the 5w50 polaris oil back in it. been clean oil ever since. my water got in threw the exhaust. my vent lines never got submerged. I wonder if and when there will be snorkle extensions for this quad.

@G-Boyz.Outside Жыл бұрын

That is what I did as you can see in the video Appreciate that advice 🍻

@CMDRTeklow82 Жыл бұрын

I commented mid video. Lmao. Atleast when you dunked your quad your rear rear tire didn’t catch your ankle and drag you under water , cut ya up hood in the process. Lmao. But I had fun that’s all the matters

@user-jo5vh2dn3i 4 ай бұрын

I put diesel fuel in my crank case then 2quarts oil 1 qt diesel mixed and it’ll dry up all the water

@G-Boyz.Outside 4 ай бұрын

Good to know thanks 🍻

@user-tu7uf4oz5m Жыл бұрын

Happy for you, you're a water God. I heard there was a redneck wedding this weekend. Bring your quad. Should be a fantastic day.

@G-Boyz.Outside Жыл бұрын

Of course I'm bringing the quad I don't leave home without it

@Timmyyyyyy1390 Жыл бұрын

This will be good if I sink mine

@michaellivingston6707 8 ай бұрын

Just a question for you. On your video u said ur dealer or Can Am Rep said use 75w140 in rear diff and 75w90 in front. I have a 2023 Outlander 700XT and ownrrs manual says only 75w90 in both diffs and 75w140 in Transmission. I know Can Am changes things up so was wondering if this is one of those changes?

@G-Boyz.Outside 7 ай бұрын

Sorry I'm just going back to you bro🍻 Yeah I asked the mechanic at the dealer and he said to use 75w140 Rear Diff & Tranny & use 75w90 Front Diff. But I didn't check the owner's manual I just took their word on it

@brianmccunney7318 7 ай бұрын

What are your thoughts on the suspension not having grease points... on the bushings or the driveshaft...?

@G-Boyz.Outside 7 ай бұрын

I know there's not even one grease nipple on this machine but there's no squeaking and I already have put on 1,116km been through mud and water.

@brianmccunney7318 7 ай бұрын

Same. I was worried about the drive shaft... once again, thanks for your reply and content. You sold on me on the Xmr 700 I was luck enough to get my hands on one right away. Hasn't disappointed at all.

@G-Boyz.Outside 7 ай бұрын

@brianmccunney7318 Congrats 🍻 you definitely won't be disappointed with this machine. I appreciate the support thanks👊🏻

@navedemor5056 4 ай бұрын

Glad I'm not nuts went over everything looking for a grease point anywhere

@G-Boyz.Outside 4 ай бұрын

@@navedemor5056 I was really surprised there was no grease nipples new style bushings that don't need greasing

@gabemartinez2558 Жыл бұрын

Is there no way to get it completely water free without doing all those oil changes like just letting it dry out? Just curious as im still just getting into the Off-road world and in my head you could probably just let it sit and dry for a while. My thinking might be completely wrong tho

@G-Boyz.Outside Жыл бұрын

Well the gears cylinder and rings are steel If you just let it sit to dry out it will create rust. It's the best thing to do for less chances of rust happening. 🍻

@hammerheartdan6311 Жыл бұрын

If you sink it, you should always drain ALL the oils right away and you would have to flush with cheap oil multiple times while running it 30-45 seconds in between until oil look clean and clear. Then you’ll put in the good oils

@gabemartinez2558 Жыл бұрын

@G-Boyz.Outside ah for some reason the possibility of rust didn't cross my mind, thank you.

@Bullet82SWE Жыл бұрын

How thick is the factory skidplate?

@G-Boyz.Outside Жыл бұрын

It's a very hard plastic 3/16 Thick

@Bullet82SWE Жыл бұрын

@@G-Boyz.Outside So i should get a real one then ;)

@G-Boyz.Outside Жыл бұрын

@@Bullet82SWE It's the same material they put under a jet boat It's strong and lightweight

@DavidDallas3343 9 ай бұрын

Is that what it takes 0w40 or 5W40?

@G-Boyz.Outside 9 ай бұрын

Yeah I ordered all that from the Can-am dealer

@DavidDallas3343 9 ай бұрын

@@G-Boyz.Outside The dealer didn't give me my owner's manual. So I'm waiting for it to come in the mail. I'm just trying to figure out. Is it 0W40 or 5W40? Or either one

@keithbelz2952 Жыл бұрын

Trade it in as new ,then the next poor bastard can wonder what he did that made it start smoking and spin the bearings,,,thats why a used atv or utv is a big risk purchase,, you wont ever know that the 500 miles wear underwater and sucking mud